Zedge Posted June 26, 2010 Share Posted June 26, 2010 I am trying to burn in DVD-ROM format but i keep on getting this message up btw im using Kodak DVD+R DL Discs I would be grateful if you could help me out thanks ........ Zedge Current Setting DVD+R DL New Setting DVD-ROM ERROR MESSAGE!!! Failed - Reason:Invalid Field In CDB Link to comment Share on other sites More sharing options...
ianymaty Posted June 26, 2010 Share Posted June 26, 2010 One thread was't enough? You are messing with the settings? In what tab you change the booktype? Your drive is a Lite-On Read this Link to comment Share on other sites More sharing options...
Cynthia Posted June 26, 2010 Share Posted June 26, 2010 No idea what model of burner you have so I'm only guessing that the burner doesn't support the book type command. Most burners set the book type of DL media to DVD-ROM by them self. Have you tried to burn a disc? Link to comment Share on other sites More sharing options...
Zedge Posted June 26, 2010 Author Share Posted June 26, 2010 I have a Lite On Link to comment Share on other sites More sharing options...
Zedge Posted June 26, 2010 Author Share Posted June 26, 2010 Yes i have burned a disc but when i go to play it on my xbox it just says open tray so im guessing iv got it on the wrong format Link to comment Share on other sites More sharing options...
Cynthia Posted June 26, 2010 Share Posted June 26, 2010 HP computer? Link to comment Share on other sites More sharing options...
Zedge Posted June 26, 2010 Author Share Posted June 26, 2010 Yeah i have a HP Small Pavillion Link to comment Share on other sites More sharing options...
Cynthia Posted June 26, 2010 Share Posted June 26, 2010 In your other thread there was a row that book type N/A, so the only way to know how it deals with DL media is to burn a disc and then verify it to see if it changed to DVD-ROM. You could insert the disc you burned (as you aborted the verify stage) and select Read mode and post the Disc Info you see in the right window. That would tell us if it changed or not. The burner is a rebadged Lite-On and HP seems to have broken the default commands for how ImgBurn sends them to the burner. Link to comment Share on other sites More sharing options...
Zedge Posted June 26, 2010 Author Share Posted June 26, 2010 Would i need to get a new burner? Link to comment Share on other sites More sharing options...
Cynthia Posted June 26, 2010 Share Posted June 26, 2010 The question is if your burner book typed it to DVD-ROM or not. By posting the Disc Info we would know. Most burners do the change of DL on its own. I would also say that most stand alone players today doesn't care if the disc is book typed or not. Atleast the new ones I bought some weeks ago. In the old time players needed it more. Link to comment Share on other sites More sharing options...
Zedge Posted June 26, 2010 Author Share Posted June 26, 2010 Btw im in the process of burning right now and has estimated to finish in 30mins time i will do what you said and post the disc info thanks for your help Link to comment Share on other sites More sharing options...
Zedge Posted June 26, 2010 Author Share Posted June 26, 2010 I had dome trouble closing and finalizing the disc as you can see below I 21:13:55 ImgBurn Version 2.5.1.0 started! I 21:13:55 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 21:13:55 Total Physical Memory: 1,964,600 KB - Available: 1,210,116 KB I 21:13:55 Initialising SPTI... I 21:13:55 Searching for SCSI / ATAPI devices... I 21:13:55 -> Drive 1 - Info: ATAPI DVD A DH16A6L-C ZHCH (D:) (ATA) I 21:13:55 Found 1 DVD±RW/RAM! I 22:06:48 Operation Started! I 22:06:48 Source File: C:\Users\BoB\Desktop\cpx-nbea.dvd I 22:06:48 Source File Sectors: 3,827,488 (MODE1/2048) I 22:06:48 Source File Size: 7,838,695,424 bytes I 22:06:48 Source File Volume Identifier: DVD-ROM I 22:06:48 Source File Volume Set Identifier: ec67c000MS UDFBridge I 22:06:48 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 22:06:48 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 22:06:48 Source File File System(s): ISO9660, UDF (1.50) I 22:06:48 Destination Device: [2:0:0] ATAPI DVD A DH16A6L-C ZHCH (D:) (ATA) I 22:06:48 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 2.4x, 4x, 6x, 8x) I 22:06:48 Destination Media Sectors: 4,173,824 I 22:06:48 Write Mode: DVD I 22:06:48 Write Type: DAO I 22:06:48 Write Speed: 2.4x I 22:06:48 Link Size: Auto I 22:06:48 Lock Volume: Yes I 22:06:48 Test Mode: No I 22:06:48 OPC: No I 22:06:48 BURN-Proof: Enabled I 22:06:48 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 22:06:48 Book Type Setting: N/A I 22:06:48 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 22:06:48 User Specified L0 Data Zone Capacity: 1,913,760 I 22:11:20 Set L0 Data Zone Capacity Succeeded! I 22:11:21 Filling Buffer... (40 MB) I 22:11:22 Writing LeadIn... I 22:11:23 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 22:11:23 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 22:11:23 Writing Layer 0... (LBA: 0 - 1913759) I 22:31:06 Writing Layer 1... (LBA: 1913760 - 3827487) I 22:50:50 Synchronising Cache... I 22:50:55 Closing Track... W 22:52:37 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 22:52:37 Close Track Failed! - Reason: Program Memory Area Update Failure W 22:52:37 Retrying (1 of 3)... I 22:52:38 Finalising Disc... W 22:54:20 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In W 22:54:21 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead In W 22:54:21 Retrying (1 of 3)... W 22:56:03 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In W 22:56:03 Retry Failed - Reason: Session Fixation Error Writing Lead In W 22:56:03 Retrying (2 of 3)... W 22:57:48 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In W 22:57:48 Retry Failed - Reason: Session Fixation Error Writing Lead In W 22:57:48 Retrying (3 of 3)... W 22:59:30 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In W 22:59:30 Retry Failed - Reason: Session Fixation Error Writing Lead In E 22:59:36 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead In I 22:59:36 Finalising Disc (Last Attempt!)... Also i went into read mode and it just kept on saying getting book type Link to comment Share on other sites More sharing options...
mmalves Posted June 26, 2010 Share Posted June 26, 2010 http://forum.imgburn.com/index.php?showtopic=8000 Link to comment Share on other sites More sharing options...
Zedge Posted June 26, 2010 Author Share Posted June 26, 2010 Are you trying to say i need to get better discs? Link to comment Share on other sites More sharing options...
Cynthia Posted June 26, 2010 Share Posted June 26, 2010 I would try with Verbatims. Have you tried with another speed than 2.4x like Speeds: 2.4x, 4x, 6x, 8x Link to comment Share on other sites More sharing options...
Zedge Posted June 26, 2010 Author Share Posted June 26, 2010 I ante tried another speed because aparantley if you go over 2.4 it mucks up the disc and wont play on the xbox properly Link to comment Share on other sites More sharing options...
Cynthia Posted June 26, 2010 Share Posted June 26, 2010 One of the myths about burning. Low speed is not always equal to best burn quality. Program Memory Area Update Failure is common with Lite-Ons and Samsungs. Seems to be a bug in the firmware. Link to comment Share on other sites More sharing options...
Zedge Posted June 26, 2010 Author Share Posted June 26, 2010 So what should i do to get rid of it? Link to comment Share on other sites More sharing options...
Zedge Posted June 26, 2010 Author Share Posted June 26, 2010 Book Type Setting: N/A Does the bookType matter? Link to comment Share on other sites More sharing options...
Cynthia Posted June 27, 2010 Share Posted June 27, 2010 Most burners book type DL to DVD-ROM by default. The N/A means that the normal commands that ImgBurn sends to the burner for this task are not recognized/supported by the burner. Only a full burn + verify or that you insert a burned disc in thread mode and post the Disc Info will tell you/us this. Link to comment Share on other sites More sharing options...
Zedge Posted June 27, 2010 Author Share Posted June 27, 2010 my burner wont veryfy it just says that the disc is not ready. Do you think i should get a new burner or not? Link to comment Share on other sites More sharing options...
Cynthia Posted June 27, 2010 Share Posted June 27, 2010 Think you should try to get some Verbatims first and if those also fails, then get a new burner. What happens if you insert the burned disc and switch to read mode? Can it read the disc? Link to comment Share on other sites More sharing options...
Recommended Posts