Jump to content

Stuck at Closing Track


Recommended Posts

The first time it was stuck at Writing LeadIn. Rebooted my computer and tried again. Writing LeadIn has no problem but now @ 100% it's stuck at Closing Track for the past 30mins! I didn't have any problem with the older versions. My drive is a BENQ DVD DD DW1620.


Here's the log


I 17:12:57 ImgBurn Version started!

I 17:12:57 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 1)

I 17:12:57 Initialising SPTI...

I 17:12:57 Searching for SCSI / ATAPI devices...

I 17:12:57 Found 2 DVD-ROMs and 1 DVD?RW!

I 17:13:37 Operation Started!

I 17:13:37 Source File: D:\FATAL CONTACT.iso

I 17:13:37 Source File Sectors: 2,286,032 (MODE1/2048)

I 17:13:37 Source File Size: 4,681,793,536 bytes

I 17:13:37 Source File Volume Identifier: FATAL CONTACT - DVD5

I 17:13:37 Source File Application Identifier: IMGBURN V2.1.0.0 - THE ULTIMATE IMAGE BURNER!

I 17:13:37 Source File Implementation Identifier: ImgBurn

I 17:13:37 Source File File System(s): ISO9660, UDF (1.02)

I 17:13:37 Destination Device: [3:1:0] BENQ DVD DD DW1620 B7W9 (E:) (ATA)

I 17:13:37 Destination Media Type: DVD+R (Disc ID: MCC-003-00) (Speeds: 2.4x, 4x, 8x, 12x)

I 17:13:37 Destination Media Sectors: 2,295,104

I 17:13:37 Write Mode: DVD

I 17:13:37 Write Type: DAO

I 17:13:37 Write Speed: 10x

I 17:13:37 Link Size: Auto

I 17:13:37 Test Mode: No

I 17:13:37 BURN-Proof: Enabled

I 17:13:38 Filling Buffer...

I 17:13:39 Writing LeadIn...

I 17:13:59 Writing Image...

I 17:21:26 Synchronising Cache...

I 17:21:27 Closing Track...

Link to comment
Share on other sites

I 17:13:37 Destination Media Type: DVD+R (Disc ID: MCC-003-00) (Speeds: 2.4x, 4x, 8x, 12x)



I 17:13:37 Write Speed: 10x




this stands out in your post you have chosen 10x write speed a speed that isn't supported by the media (see first line above)

I have never seen 10x as a supported speed ever on any media

Have you checked that you're using the latest Firmware ?

I believe these are 8X discs try burning at 8x and see what happens could also be a bad disc in the spindle

Link to comment
Share on other sites


  • Create New...

Important Information

By using this site, you agree to our Terms of Use.