Jump to content
Sign in to follow this  
HTNUTS

Freezing up at layer break.... HELP

Recommended Posts

I've been making copys of my new discs using Shrink (v3.2) and Imgburn (v2.3). I usually rip to a iso file that I designate to my desktop. From there I drag it into Imgburn set in the 'write' mode. Once I insert a blank disc (Verbatim) and click on little burn icon, it automatically starts the process. I never have a choice of layer break point. As a result, I'm freezing at most of my break points.

Any help would be most appreciated. Below is my latest copy that froze up.

 

 

I 15:41:03 ImgBurn Version 2.2.0.0 started!

I 15:41:03 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 15:41:03 Total Physical Memory: 1,047,556 KB - Available: 583,692 KB

I 15:41:03 Initialising SPTI...

I 15:41:03 Searching for SCSI / ATAPI devices...

I 15:41:03 Found 1 DVD-ROM and 1 DVD?RW!

I 15:42:04 Operation Started!

I 15:42:04 Source File: C:\Documents and Settings\Mark\Desktop\HAPPY_FEET.ISO

I 15:42:04 Source File Sectors: 3,226,154 (MODE1/2048)

I 15:42:04 Source File Size: 6,607,163,392 bytes

I 15:42:04 Source File Volume Identifier: HAPPY_FEET

I 15:42:04 Source File Implementation Identifier: DVD Shrink

I 15:42:04 Source File File System(s): ISO9660, UDF (1.02)

I 15:42:04 Destination Device: [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA)

I 15:42:04 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 15:42:04 Destination Media Sectors: 4,173,824

I 15:42:04 Write Mode: DVD

I 15:42:04 Write Type: DAO

I 15:42:04 Write Speed: 3x

I 15:42:04 Link Size: Auto

I 15:42:04 Test Mode: No

I 15:42:04 BURN-Proof: Enabled

W 15:42:09 Optimal L1 Data Zone Start LBA: None Found! (VTS_01)

I 15:42:09 Optimal L0 Data Zone Capacity: 1,613,440

I 15:42:09 Optimal L0 Data Zone Method: ECC Block Boundary, VOBU Boundary

I 15:42:36 Filling Buffer... (20 MB)

I 15:42:37 Writing LeadIn...

I 15:42:38 Writing Image...

I 15:42:38 Writing Layer 0... (LBA: 0 - 1613439)

I 15:58:47 Writing Layer 1... (LBA: 1613440 - 3226153)

I 16:15:26 Synchronising Cache...

I 16:15:27 Closing Track...

I 16:15:48 Finalising Disc...

I 16:16:40 Image MD5: 5d80a37329de2b7b2ebafbb18e22c151

I 16:16:41 Operation Successfully Completed! - Duration: 00:34:36

I 16:16:41 Average Write Rate: 3,280 KB/s (2.4x) - Maximum Write Rate: 3,465 KB/s (2.5x)

I 16:16:41 Cycling Tray before Verify...

I 16:17:07 Device Ready!

I 16:17:07 Operation Started!

I 16:17:07 Source Device: [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA)

I 16:17:07 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 16:17:07 Image File: C:\Documents and Settings\Mark\Desktop\HAPPY_FEET.ISO

I 16:17:07 Image File Sectors: 3,226,154 (MODE1/2048)

I 16:17:07 Image File Size: 6,607,163,392 bytes

I 16:17:07 Image File Volume Identifier: HAPPY_FEET

I 16:17:07 Image File Implementation Identifier: DVD Shrink

I 16:17:07 Image File File System(s): ISO9660, UDF (1.02)

I 16:17:07 Read Speed: 10x

W 16:17:07 [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA) - Selected Read Speed: 13,850 KB/s (10x)

W 16:17:07 [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA) - Actual Read Speed: 11,080 KB/s (8x)

I 16:17:07 Verifying Sectors... (LBA: 0 - 3226153)

I 16:34:06 Device MD5: 5d80a37329de2b7b2ebafbb18e22c151

I 16:34:06 Device (Padded) MD5: 963a4de37e7f74d29b325c33379b87e8

I 16:34:06 Image MD5: 5d80a37329de2b7b2ebafbb18e22c151

I 16:34:07 Operation Successfully Completed! - Duration: 00:16:59

I 16:34:07 Average Verify Rate: 6,332 KB/s (4.6x) - Maximum Verify Rate: 9,321 KB/s (6.7x)

I 16:35:34 Close Request Acknowledged

I 16:35:34 Closing Down...

I 16:35:35 Shutting down SPTI...

I 16:35:35 ImgBurn closed!

Share this post


Link to post
Share on other sites

dont use Shrink to make the ISO its not able to do the LB correctly, use IB in Build mode and you should be OK

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.