Jump to content
Sign in to follow this  
burgemaster

Imgburn fails when i click "My Computer"

Recommended Posts

Which drivers are listed under device manager.

 

This is what mine looks like.

 

 

2000538814214114075_rs.jpg

 

 

I also ran ImgBurn and used cmc mag media (not known for being the best media) and opened loads of windows a few instances of my computer, paint, websites and not a hint of any slowdown/ issues burning etc.

 

 

 

 

 

2002168115080354633_rs.jpg

 

 

I 15:56:55 ImgBurn Version 2.3.2.0 started!

I 15:56:55 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000)

I 15:56:55 Total Physical Memory: 2,094,976 KB - Available: 1,642,396 KB

I 15:56:55 Initialising SPTI...

I 15:56:55 Searching for SCSI / ATAPI devices...

I 15:57:05 Found 1 DVD-ROM and 1 DVD

Share this post


Link to post
Share on other sites

wow thanks mate loads of info there......

my vista machine is now dead lol, i tried the nvidea drivers and it freezes just after the scrolling vista logo...

Will have to do a fresh install now.

Will post results! thx

Share this post


Link to post
Share on other sites

Make sure you go into bios and Disable SILICON IMAGE SATA II

 

These are under Onboard device configuration.

 

 

 

Under serial ATA enable Serial ATA Controller

 

And Disable RAID

 

Then Enable the SATA ports you are going to use.

Share this post


Link to post
Share on other sites

Reinstalled, tried vista 64bit this time, every driver installed itself which is new, and now it works :)

Now my drive says (Fibre) after it?

thx for the help

 

I 17:34:40 ImgBurn Version 2.3.2.0 started!

I 17:34:40 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000)

I 17:34:40 Total Physical Memory: 2,095,040 KB - Available: 1,417,200 KB

I 17:34:40 Initialising SPTI...

I 17:34:40 Searching for SCSI / ATAPI devices...

I 17:34:40 Found 1 DVD

Share this post


Link to post
Share on other sites

Just installed Daemon tools and ITS BACK !!!!!!!!

 

systemad4.jpg

 

The Drivers seem to be the same as yours?

Edited by burgemaster

Share this post


Link to post
Share on other sites

Using which disc's.

 

maybe what your installing after is causing you trouble.

 

What is jungo. [edit] never mind thought it looked familiar, if it is pcix/usb stuff maybe that is causing the issues

 

What size psu have you got in ? and regardless of Watts what ampage is the 12 v line (normally on the sticker of psu)

 

 

[edit] and your drivers are not exactly the same as mine... look under atapi

Share this post


Link to post
Share on other sites

Hi there,

PSU is a Viper 600watts.

The Jungo is a driver for a card reader.

Im pretty sure that Vista updated my drivers for me when i shut down, i think that it is installing updating drivers that dont work.

I will try again, if not will reinstall....

 

Just updated drivers and there back to the same section as you now?????

 

groupei0.jpg

Edited by burgemaster

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.