Jump to content

i select speed 2.4 and it burns at 4.0


Merkery
 Share

Recommended Posts

anyway not to undermind you this is what im doign as we speak as you see ive selected write speed of 2 this time it is going at 4 as it writes

 

I 00:44:25 Operation Started!

I 00:44:25 Source File: E:\Games Factory\New Folder\dgr-svsr2k9.dvd

I 00:44:25 Source File Sectors: 3,697,696 (MODE1/2048)

I 00:44:25 Source File Size: 7,572,881,408 bytes

I 00:44:25 Source File Volume Identifier: XGD2DVD_NTSC

I 00:44:25 Source File Volume Set Identifier: 34672923

I 00:44:25 Source File Implementation Identifier: Sonic Scenarist 3.1

I 00:44:25 Source File File System(s): ISO9660, UDF (1.02)

I 00:44:25 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GH22NP20 1.02 (D:) (ATA)

I 00:44:25 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x)

I 00:44:25 Destination Media Sectors: 4,173,824

I 00:44:25 Write Mode: DVD

I 00:44:25 Write Type: DAO

I 00:44:25 Write Speed: 2x

I 00:44:25 Link Size: Auto

I 00:44:25 Test Mode: No

I 00:44:25 OPC: No

I 00:44:25 BURN-Proof: Enabled

I 00:44:25 Book Type Setting: DVD-ROM

I 00:44:25 Optimal L0 Data Zone Capacity: 1,913,760

I 00:44:25 Optimal L0 Data Zone Method: Copied From Original Disc

I 00:44:25 Filling Buffer... (20 MB)

I 00:44:25 Writing LeadIn...

I 00:45:00 Writing Session 1 of 1... (1 Track, LBA: 0 - 3697695)

I 00:45:00 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3697695)

I 00:45:00 Writing Layer 0... (LBA: 0 - 1913759)

I 00:57:27 Writing Layer 1... (LBA: 1913760 - 3697695)

Link to comment
Share on other sites

I 00:44:25 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x)

 

2.4X isn't supported by your firmware/burner so all you have to choose from is 4X, 6X, and 8X.

 

There is a firmware update available for your burner which may give you more speeds to choose from...1.03 from here ~ http://www.firmwarehq.com/LG/GH22NP20/files.html

 

It's not required to verify your burns, but it does serve a purpose.

Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.