Icemanza Posted January 17, 2011 Share Posted January 17, 2011 Im trying to burn a backup of avatar 3D on to a Verbatim BD-R 50gig with a LG BH10LS30 BD-R/BD-R and i keep getting different errors.I updated the firmware and even uninstalled and reinstalled imgburn. Before this all started i was able to burn 3 other 3D blurays on the same typ of disc but now i get the errors below on the discs. I dont want to keep waisting them as they will end up as expensive coasters.I normally test them on a BD-RE 50gig and no probs then i would do a burn on to the BD-R 50gig.I have also tried Traxdata BD-R 25gig and it burns no problem. I have tried burning DVDs and this is the first problem i have encountered with this drive and with imgburn. It seems to sit on writing leadIn and then the errors pop up.Not sure if there are any setting i need to change or maybe drivers or if there is new firmware for the LG as i have 1.00.9 and ive looked around and cant seem to figure it out.These are the two errors im getting below with different discs but from the same brand ie verbatim. I 21:03:10 ImgBurn Version 2.5.5.0 started! I 21:03:10 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 21:03:10 Total Physical Memory: 6,282,352 KB - Available: 4,864,540 KB I 21:03:10 Initialising SPTI... I 21:03:10 Searching for SCSI / ATAPI devices... I 21:03:10 -> Drive 1 - Info: ASUS DRW-1814BLT 1.14 (F:) (SATA) I 21:03:11 -> Drive 2 - Info: HL-DT-ST BD-RE BH10LS30 1.00 (D:) (SATA) I 21:03:11 Found 1 DVD±RW/RAM and 1 BD-RE! I 21:03:59 Operation Started! I 21:03:59 Source File: E:\1. 3D Movies\Avatar 3D\AVATAR_3D.iso I 21:03:59 Source File Sectors: 24,438,784 (MODE1/2048) I 21:03:59 Source File Size: 50,050,629,632 bytes I 21:03:59 Source File Volume Identifier: RED_BIRD_3D_F2 I 21:03:59 Source File Volume Set Identifier: 3D2E7CC4RED_BIRD I 21:03:59 Source File Application Identifier: BD Authoring I 21:03:59 Source File Implementation Identifier: MEI I 21:03:59 Source File File System(s): UDF (2.50) I 21:03:59 Destination Device: [4:0:0] HL-DT-ST BD-RE BH10LS30 1.00 (D:) (SATA) I 21:03:59 Destination Media Type: BD-R (Disc ID: VERBAT-IMd-000) (Speeds: 2x, 4x, 6x) I 21:03:59 Destination Media Sectors: 24,438,784 I 21:03:59 Write Mode: BD I 21:03:59 Write Type: DAO I 21:03:59 Write Speed: 2x I 21:03:59 BD-R Verify Not Required: Yes I 21:03:59 Link Size: Auto I 21:03:59 Lock Volume: Yes I 21:03:59 Test Mode: No I 21:03:59 OPC: No I 21:03:59 BURN-Proof: Enabled I 21:03:59 Write Speed Successfully Set! - Effective: 8,991 KB/s (2x) I 21:03:59 Filling Buffer... (40 MB) I 21:04:00 Writing LeadIn... W 21:06:01 Failed to Write Sectors 0 - 31 - Reason: No Seek Complete W 21:06:01 Retrying (1 of 20)... I 21:06:01 Writing LeadIn... W 21:07:13 Failed to Write Sectors 928 - 959 - Reason: Program Memory Area Update Failure W 21:07:13 Retrying (1 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (2 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (3 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (4 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (5 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (6 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (7 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (8 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (9 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (10 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (11 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (12 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (13 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (14 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (15 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (16 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (17 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (18 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (19 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write W 21:07:13 Retrying (20 of 20)... W 21:07:13 Retry Failed - Reason: Invalid Address For Write E 21:07:56 Failed to Write Sectors 928 - 959 - Reason: Program Memory Area Update Failure E 21:07:56 Next Writable Address: 0 I 21:07:56 Synchronising Cache... I 21:08:30 Closing Track... I 21:08:31 Finalising Disc... E 21:12:03 Failed to Write Image! E 21:12:09 Operation Failed! - Duration: 00:08:04 I 21:12:09 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) I 02:46:24 ImgBurn Version 2.5.5.0 started! I 02:46:24 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 02:46:24 Total Physical Memory: 6,282,352 KB - Available: 4,548,352 KB I 02:46:24 Initialising SPTI... I 02:46:24 Searching for SCSI / ATAPI devices... I 02:46:24 -> Drive 1 - Info: ASUS DRW-1814BLT 1.14 (F:) (SATA) I 02:46:24 -> Drive 2 - Info: HL-DT-ST BD-RE BH10LS30 1.00 (D:) (SATA) I 02:46:24 Found 1 DVD±RW/RAM and 1 BD-RE! I 02:46:38 Operation Started! I 02:46:38 Source File: E:\1. 3D Movies\Avatar 3D\AVATAR_3D.iso I 02:46:38 Source File Sectors: 24,438,784 (MODE1/2048) I 02:46:38 Source File Size: 50,050,629,632 bytes I 02:46:38 Source File Volume Identifier: RED_BIRD_3D_F2 I 02:46:38 Source File Volume Set Identifier: 3D2E7CC4RED_BIRD I 02:46:38 Source File Application Identifier: BD Authoring I 02:46:38 Source File Implementation Identifier: MEI I 02:46:38 Source File File System(s): UDF (2.50) I 02:46:38 Destination Device: [4:0:0] HL-DT-ST BD-RE BH10LS30 1.00 (D:) (SATA) I 02:46:38 Destination Media Type: BD-R (Disc ID: VERBAT-IMd-000) (Speeds: 2x, 4x, 6x) I 02:46:38 Write Mode: BD I 02:46:38 Write Type: DAO I 02:46:38 Write Speed: 4x I 02:46:38 BD-R Verify Not Required: Yes I 02:46:38 Link Size: Auto I 02:46:38 Lock Volume: Yes I 02:46:38 Test Mode: No I 02:46:38 OPC: No I 02:46:38 BURN-Proof: Enabled I 02:46:57 Write Speed Successfully Set! - Effective: 17,982 KB/s (4x) I 02:46:57 Filling Buffer... (40 MB) I 02:46:58 Writing LeadIn... W 02:46:58 Failed to Write Sectors 0 - 31 - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (1 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (2 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (3 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (4 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (5 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (6 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (7 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (8 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (9 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (10 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (11 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (12 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (13 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (14 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (15 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (16 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (17 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (18 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (19 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:46:58 Retrying (20 of 20)... W 02:46:58 Retry Failed - Reason: Cannot Write Medium - Incompatible Format E 02:47:01 Failed to Write Sectors 0 - 31 - Reason: Cannot Write Medium - Incompatible Format I 02:47:01 Synchronising Cache... W 02:47:02 Potential 'WaitImmediateIO' Deferred Error - (1/3) - Unable to Recover TOC W 02:47:02 Synchronise Cache Failed! - Reason: Unable to Recover TOC W 02:47:02 Retrying (1 of 3)... W 02:47:03 Potential 'WaitImmediateIO' Deferred Error - (1/3) - Unable to Recover TOC W 02:47:03 Retry Failed - Reason: Unable to Recover TOC W 02:47:03 Retrying (2 of 3)... W 02:47:04 Potential 'WaitImmediateIO' Deferred Error - (1/3) - Unable to Recover TOC W 02:47:04 Retry Failed - Reason: Unable to Recover TOC W 02:47:04 Retrying (3 of 3)... W 02:47:05 Potential 'WaitImmediateIO' Deferred Error - (1/3) - Unable to Recover TOC W 02:47:05 Retry Failed - Reason: Unable to Recover TOC E 02:47:10 Synchronise Cache Failed! - Reason: Unable to Recover TOC I 02:47:10 Synchronising Cache (Last Attempt!)... W 02:47:11 User opted to skip the 'Close Track/Session/Disc' functions. E 02:47:11 Failed to Write Image! E 02:47:16 Operation Failed! - Duration: 00:00:32 I 02:47:16 Average Write Rate: N/A - Maximum Write Rate: N/A Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 17, 2011 Share Posted January 17, 2011 It looks like you tried to reuse the same disc in the second log. Is that the case? If so, you have to just ignore that one. If 'VERBAT-IMd-000' aren't working well in your drive, perhaps give the 'VERBAT-IMb-000' or 'VERBAT-IMf-000' versions a go instead. Link to comment Share on other sites More sharing options...
Icemanza Posted January 18, 2011 Author Share Posted January 18, 2011 (edited) It looks like you tried to reuse the same disc in the second log. Is that the case? If so, you have to just ignore that one. If 'VERBAT-IMd-000' aren't working well in your drive, perhaps give the 'VERBAT-IMb-000' or 'VERBAT-IMf-000' versions a go instead. Yes i did try the same disc again as it was showing empty and say 50gig space available.Ok will do that but i ve managed to burn a few of these discs before these errors popped up. What is the best way in finding these discs with that mid code? Would you possibly have any links for me pls. Edited January 18, 2011 by Icemanza Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 18, 2011 Share Posted January 18, 2011 You'd have to look at some online stores in your country that sell Blu-ray discs and hope they list the MIDs. Link to comment Share on other sites More sharing options...
Icemanza Posted January 20, 2011 Author Share Posted January 20, 2011 I managed to use the same disc as before and it worked no problem as you can see below but then i tried to burn another movie and it started ok but then it all went tits up at the end bit. I used the same discs as i have some left over. So why would it be doing this then becuase i first got the Program Memory Area Update Failure thing then it started burning then incompatible after it started to finalise the disc. Is it possible to maybe get img burn to be more compatible with these discs or maybe my burner if that is the problem just so we can sort of find out twhere the cuase is. thanks I 23:53:58 ImgBurn Version 2.5.5.0 started! I 23:53:58 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 23:53:58 Total Physical Memory: 6,282,352 KB - Available: 4,801,344 KB I 23:53:58 Initialising SPTI... I 23:53:58 Searching for SCSI / ATAPI devices... I 23:53:58 -> Drive 1 - Info: ASUS DRW-1814BLT 1.14 (F:) (SATA) I 23:53:58 -> Drive 2 - Info: HL-DT-ST BD-RE BH10LS30 1.00 (D:) (SATA) I 23:53:58 Found 1 DVD±RW/RAM and 1 BD-RE! I 23:54:38 Operation Started! I 23:54:38 Source File: E:\1. 3D Movies\HTTYD\HOW_TO_TRAIN_YOUR_DRAGON_3D.iso I 23:54:38 Source File Sectors: 19,282,432 (MODE1/2048) I 23:54:38 Source File Size: 39,490,420,736 bytes I 23:54:38 Source File Volume Identifier: HOW_TO_TRAIN_YOUR_DRAGON_3D I 23:54:38 Source File Volume Set Identifier: 3D2CB16ERDUS0004 I 23:54:38 Source File Implementation Identifier: Ulead Systems USA Inc. I 23:54:38 Source File File System(s): UDF (2.50) I 23:54:38 Destination Device: [4:0:0] HL-DT-ST BD-RE BH10LS30 1.00 (D:) (SATA) I 23:54:38 Destination Media Type: BD-R (Disc ID: VERBAT-IMd-000) (Speeds: 2x, 4x, 6x) I 23:54:38 Destination Media Sectors: 24,438,784 I 23:54:38 Write Mode: BD I 23:54:38 Write Type: DAO I 23:54:38 Write Speed: 2x I 23:54:38 BD-R Verify Not Required: Yes I 23:54:38 Link Size: Auto I 23:54:38 Lock Volume: Yes I 23:54:38 Test Mode: No I 23:54:38 OPC: No I 23:54:38 BURN-Proof: Enabled I 23:54:38 Write Speed Successfully Set! - Effective: 8,991 KB/s (2x) I 23:55:06 Filling Buffer... (40 MB) I 23:55:07 Writing LeadIn... I 23:55:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 19282431) I 23:55:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 19282431) I 23:55:08 Writing Layer 0... (LBA: 0 - 12219391) I 00:41:47 Writing Layer 1... (LBA: 12219392 - 19282431) I 01:08:43 Synchronising Cache... I 01:08:47 Closing Track... I 01:08:48 Finalising Disc... I 01:09:06 Exporting Graph Data... I 01:09:06 Graph Data File: C:\Users\Reuben\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.00_19-JANUARY-2011_23-54_VERBAT-IMd-000_2x.ibg I 01:09:06 Export Successfully Completed! I 01:09:06 Operation Successfully Completed! - Duration: 01:14:27 I 01:09:06 Average Write Rate: 8,734 KB/s (1.9x) - Maximum Write Rate: 9,061 KB/s (2.0x) I 01:09:06 Cycling Tray before Verify... W 01:09:15 Waiting for device to become ready... I 01:09:38 Device Ready! I 01:09:39 Operation Started! I 01:09:39 Source Device: [4:0:0] HL-DT-ST BD-RE BH10LS30 1.00 (D:) (SATA) I 01:09:39 Source Media Type: BD-R (Disc ID: VERBAT-IMd-000) (Speeds: 2x, 4x, 6x) I 01:09:39 Image File: E:\1. 3D Movies\HTTYD\HOW_TO_TRAIN_YOUR_DRAGON_3D.iso I 01:09:39 Image File Sectors: 19,282,432 (MODE1/2048) I 01:09:39 Image File Size: 39,490,420,736 bytes I 01:09:39 Image File Volume Identifier: HOW_TO_TRAIN_YOUR_DRAGON_3D I 01:09:39 Image File Volume Set Identifier: 3D2CB16ERDUS0004 I 01:09:39 Image File Implementation Identifier: Ulead Systems USA Inc. I 01:09:39 Image File File System(s): UDF (2.50) I 01:09:39 Read Speed (Data/Audio): MAX / MAX I 01:09:39 Verifying Session 1 of 1... (1 Track, LBA: 0 - 19282431) I 01:09:39 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 19282431) I 01:09:39 Verifying Layer 0... (LBA: 0 - 12219391) I 01:36:27 Verifying Layer 1... (LBA: 12219392 - 19282431) I 01:49:16 Exporting Graph Data... I 01:49:16 Graph Data File: C:\Users\Reuben\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.00_19-JANUARY-2011_23-54_VERBAT-IMd-000_2x.ibg I 01:49:16 Export Successfully Completed! I 01:49:16 Operation Successfully Completed! - Duration: 00:39:31 I 01:49:16 Average Verify Rate: 16,272 KB/s (3.6x) - Maximum Verify Rate: 22,071 KB/s (4.9x) I 01:50:48 Close Request Acknowledged I 01:50:48 Closing Down... I 01:50:48 Shutting down SPTI... I 01:50:48 ImgBurn closed! I 02:09:17 ImgBurn Version 2.5.5.0 started! I 02:09:17 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 02:09:17 Total Physical Memory: 6,282,352 KB - Available: 4,528,776 KB I 02:09:17 Initialising SPTI... I 02:09:17 Searching for SCSI / ATAPI devices... I 02:09:18 -> Drive 1 - Info: ASUS DRW-1814BLT 1.14 (F:) (SATA) I 02:09:18 -> Drive 2 - Info: HL-DT-ST BD-RE BH10LS30 1.00 (D:) (SATA) I 02:09:18 Found 1 DVD±RW/RAM and 1 BD-RE! I 02:09:36 Operation Started! I 02:09:36 Source File: E:\1. 3D Movies\Avatar 3D\AVATAR_3D.iso I 02:09:36 Source File Sectors: 24,438,784 (MODE1/2048) I 02:09:36 Source File Size: 50,050,629,632 bytes I 02:09:36 Source File Volume Identifier: AVATAR 3D I 02:09:36 Source File Volume Set Identifier: 3D2E7CC4RED_BIRD I 02:09:36 Source File Application Identifier: BD Authoring I 02:09:36 Source File Implementation Identifier: MEI I 02:09:36 Source File File System(s): UDF (2.50) I 02:09:36 Destination Device: [4:0:0] HL-DT-ST BD-RE BH10LS30 1.00 (D:) (SATA) I 02:09:36 Destination Media Type: BD-R (Disc ID: VERBAT-IMd-000) (Speeds: 2x, 4x, 6x) I 02:09:36 Destination Media Sectors: 24,438,784 I 02:09:36 Write Mode: BD I 02:09:36 Write Type: DAO I 02:09:36 Write Speed: 2x I 02:09:36 BD-R Verify Not Required: Yes I 02:09:36 Link Size: Auto I 02:09:36 Lock Volume: Yes I 02:09:36 Test Mode: No I 02:09:36 OPC: No I 02:09:36 BURN-Proof: Enabled I 02:09:36 Write Speed Successfully Set! - Effective: 8,991 KB/s (2x) I 02:09:36 Filling Buffer... (40 MB) I 02:09:37 Writing LeadIn... W 02:11:05 Failed to Write Sectors 0 - 31 - Reason: Program Memory Area Update Failure W 02:11:05 Retrying (1 of 20)... I 02:11:05 Writing LeadIn... I 02:11:05 Writing Session 1 of 1... (1 Track, LBA: 0 - 24438783) I 02:11:05 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 24438783) I 02:11:05 Writing Layer 0... (LBA: 0 - 12219391) I 02:57:45 Writing Layer 1... (LBA: 12219392 - 24438783) I 03:44:20 Synchronising Cache... I 03:45:29 Closing Track... I 03:45:30 Finalising Disc... W 03:45:52 Finalise Disc Failed! - Reason: Cannot Write Medium - Incompatible Format W 03:45:52 Retrying (1 of 3)... W 03:45:52 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 03:45:52 Retrying (2 of 3)... W 03:45:52 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 03:45:52 Retrying (3 of 3)... W 03:45:52 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 03:59:47 Retrying (4)... W 03:59:47 Retry Failed - Reason: Cannot Write Medium - Incompatible Format I 03:59:50 Exporting Graph Data... I 03:59:50 Graph Data File: C:\Users\Reuben\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.00_20-JANUARY-2011_02-09_VERBAT-IMd-000_2x.ibg I 03:59:50 Export Successfully Completed! I 03:59:50 Operation Successfully Completed! - Duration: 01:50:13 I 03:59:50 Average Write Rate: 8,737 KB/s (1.9x) - Maximum Write Rate: 9,061 KB/s (2.0x) I 03:59:50 Cycling Tray before Verify... W 03:59:57 Waiting for device to become ready... W 04:00:20 Device Not Ready - Unable to Recover TOC W 04:00:20 Retrying (1 of 3)... I 04:00:20 Cycling Tray before Verify... W 04:00:29 Waiting for device to become ready... W 04:00:53 Retry Failed - Reason: Unable to Recover TOC W 04:00:53 Retrying (2 of 3)... I 04:00:53 Cycling Tray before Verify... W 04:01:02 Waiting for device to become ready... W 04:01:25 Retry Failed - Reason: Unable to Recover TOC W 04:01:25 Retrying (3 of 3)... I 04:01:25 Cycling Tray before Verify... W 04:01:34 Waiting for device to become ready... W 04:01:57 Retry Failed - Reason: Unable to Recover TOC E 04:02:06 Device Not Ready - Reason: Unable to Recover TOC E 04:02:06 Operation Aborted! I 04:02:21 Close Request Acknowledged I 04:02:21 Closing Down... I 04:02:21 Shutting down SPTI... I 04:02:21 ImgBurn closed! Link to comment Share on other sites More sharing options...
Icemanza Posted January 20, 2011 Author Share Posted January 20, 2011 It looks like you tried to reuse the same disc in the second log. Is that the case? If so, you have to just ignore that one. If 'VERBAT-IMd-000' aren't working well in your drive, perhaps give the 'VERBAT-IMb-000' or 'VERBAT-IMf-000' versions a go instead. But this is the disc im using and it has the same mid code as you have mentioned above! VERBAT-IMd-000 You'd have to look at some online stores in your country that sell Blu-ray discs and hope they list the MIDs. Im in the UK by the way :-) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 20, 2011 Share Posted January 20, 2011 No, there's 'VERBAT-IMb-000', 'VERBAT-IMd-000' and 'VERBAT-IMf-000'. (That's b, d and f versions) b is the slowest rated one (write speed wise, that's normally 2x), then d (4x), then f (6x). So if you're using d (4x), that still leaves b (2x) and f (6x) for you to try. As you're buying Verbatim, you don't really need MID codes, you just need to look at the rated speed of the disc. If you're in the UK like me, you can use places like: TotalBlankMedia - http://www.totalblankmedia.com/bluray-r-c-93_95.html?filter_id=13&sort=3a DiskDepot - http://www.diskdepot.co.uk/acatalog/blu-ray.html eBay - http://www.ebay.co.uk/ SVP - http://www.svp.co.uk/ ARP Media - http://www.aprmedia.com/category.php?cid=136&bid=22§or=2&link=m Basically, any semi decent Google search will return some good links of where to buy them so just go to wherever suits you best. Link to comment Share on other sites More sharing options...
Icemanza Posted January 22, 2011 Author Share Posted January 22, 2011 No, there's 'VERBAT-IMb-000', 'VERBAT-IMd-000' and 'VERBAT-IMf-000'. (That's b, d and f versions) b is the slowest rated one (write speed wise, that's normally 2x), then d (4x), then f (6x). So if you're using d (4x), that still leaves b (2x) and f (6x) for you to try. As you're buying Verbatim, you don't really need MID codes, you just need to look at the rated speed of the disc. If you're in the UK like me, you can use places like: TotalBlankMedia - http://www.totalblankmedia.com/bluray-r-c-93_95.html?filter_id=13&sort=3a DiskDepot - http://www.diskdepot.co.uk/acatalog/blu-ray.html eBay - http://www.ebay.co.uk/ SVP - http://www.svp.co.uk/ ARP Media - http://www.aprmedia.com/category.php?cid=136&bid=22§or=2&link=m Basically, any semi decent Google search will return some good links of where to buy them so just go to wherever suits you best. Oh sorry for my ignorance man i didnt notice the b , d but i did notice f becuase they looked similar. Yes ill try that and see what happens but would you perhaps know why it would still write to the discs then wont for another? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 22, 2011 Share Posted January 22, 2011 Burning isn't something that's always successful or always fails. There are loads of stages in between and I guess you're hovering right around the success/failure point. Basically, you're playing Russian roulette. Link to comment Share on other sites More sharing options...
Recommended Posts