DonDE Posted August 26, 2008 Share Posted August 26, 2008 Hi everyone .. Never seems to fail, does it? New user - Dumb question!!! Attempted tho burn iso file and keep getting the Failure to set write parameters. Write speed was set on AUTO. I 09:58:58 Destination Device: [1:0:0] MITSUMI CR-4804TE 2.6C (E:) (ATA) I 09:58:58 Destination Media Type: CD-R* I 09:58:58 Destination Media Sectors: 359,843 I 09:58:58 Write Mode: CD I 09:58:58 Write Type: SAO I 09:58:58 Write Speed: MAX I 09:58:58 Test Mode: No I 09:58:58 OPC: No I 09:58:58 BURN-Proof: Enabled E 09:58:59 Failed to set Write Parameters! E 09:59:07 Operation Failed! - Duration: 00:00:06 I 09:59:07 Average Write Rate: N/A - Maximum Write Rate: N/A MITSUMI CR-4804TE 2.6C (ATA) Current Profile: Unknown (Not Supported) Disc Information: Status: Empty Erasable: No Free Sectors: 359,843 Free Space: 736,958,464 bytes Free Time: 79:59:68 (MM:SS:FF) ATIP Information: Start Time of LeadIn (MID): 97m15s17f Last Possible Start Time of LeadOut: 79m59s70f HELP!!! DonDE Link to comment Share on other sites More sharing options...
mmalves Posted August 26, 2008 Share Posted August 26, 2008 I 09:58:58 Destination Device: [1:0:0] MITSUMI CR-4804TE 2.6C (E:) (ATA) There's a newer firmware (3.0d) available for your burner at this page. Remove any disc from the drive and close the tray before applying the new firmware. Reboot the computer after it has finished updating. If that doesn't solve your problem, throw that museum piece in the garbage and treat yourself to a new IDE/PATA DVD burner Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 26, 2008 Share Posted August 26, 2008 You could try changing the 'Write Type' to TAO, maybe your drive is so old that it doesn't like SAO (or at least not how I'm trying to set it up). That's what happens when the drive is ancient and doesn't comply with the MMC specs ImgBurn is built around Link to comment Share on other sites More sharing options...
DonDE Posted August 26, 2008 Author Share Posted August 26, 2008 EXCUSE ME!!! My age puts me in the category of "MUSEUM PIECE" as well..<grin> LOL!!! Thanks for the reply. Will get the new firmware first before I join the old drive in the garbage. DonDE Link to comment Share on other sites More sharing options...
DonDE Posted August 26, 2008 Author Share Posted August 26, 2008 You could try changing the 'Write Type' to TAO, maybe your drive is so old that it doesn't like SAO (or at least not how I'm trying to set it up). That's what happens when the drive is ancient and doesn't comply with the MMC specs ImgBurn is built around Thank you. Will go into the settings and do that. DonDE Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 26, 2008 Share Posted August 26, 2008 Try just the firmware first though Link to comment Share on other sites More sharing options...
DonDE Posted August 26, 2008 Author Share Posted August 26, 2008 Try just the firmware first though Oops! Too late for that. Changed the settings and got the burn. Will still try the firmware, too. Thanks DonDE Link to comment Share on other sites More sharing options...
LOCOENG Posted August 27, 2008 Share Posted August 27, 2008 Changed the settings and got the burn. A good burn? A firmware update won't be a bad idea either and should increase your chances at success....good luck. Link to comment Share on other sites More sharing options...
DonDE Posted August 29, 2008 Author Share Posted August 29, 2008 Changed the settings and got the burn. A good burn? A firmware update won't be a bad idea either and should increase your chances at success....good luck. Thanks all for the help. Here, have one on me.... Hey... I said just one. LOL ,,, DonDE Link to comment Share on other sites More sharing options...
MarkST Posted October 11, 2008 Share Posted October 11, 2008 Dont feel bad I am having the same problem, and my drive is approx 8 months old. It's a MEMOREX External 20X model number 32023223.. I have tried all the suggestions I can locate to no avail. Seems to read ok, just will not write.. Link to comment Share on other sites More sharing options...
mmalves Posted October 11, 2008 Share Posted October 11, 2008 Please post a log (you can find it at Help menu -> ImgBurn Logs). Link to comment Share on other sites More sharing options...
Recommended Posts