juandan

Hi, I have windows 7, I created an ISO file with imageburn, my problem is I can't find the ISO file I created, I've been in to c drive, but cant find it no where, your help is appreciated

will do, thanks.

Hi, I'm new to this so please excuse my ignorance, I have burned a image file with imageburm, when I played the burned file back, I have four folders, Data, Documentation, language, and speach, how do I get it play? it a language course, your help is appreciated

thanks for that, I'm learning

The file is a single avi file, it doesn't say in the dvd manual if it supports avi or not, this is how I burned the dvd http://forum.imgburn.com/index.php?showtopic=4632 I know what your saying now, Imgburn does not do a conversion from avi to dvd, so I have to convert them to dvd before I can burn them with Imgburn is that righ?

Cynthia the error is on my part I missed the 0 out at the end, so that must be the problem, its my dvd player not being able to play ISO9660 format. its a sony dvd player I've had a number of years, time for a new one I think

post a log file. we cant help you at all without seeing this also, have you burnt a disc with this laptop before that DOES play on your home player ? is your home player compatable with the type of disc you used, ie -R/+R/ R/W ? is your source file a PAL type and your in a NTSC region ?

Hey Juandan, I am having a similar problem with a home Sony DVD player, the DVD drive in my laptop is a Pioneer DVD+RW DR-K17Y ATA Device. After burning the DVD plays on my laptop, but not on my home player. Any advice? to be honest I can't really help, the guys on this forum are the experts I'm sure if you post your problem they will help. good luck

every thing seem to be working now, I uninstall the sata dvd-rw and installed a IDE dvd-rw, dma is enabled I just burned a dvd and it plays in my dvd player thanks for your help

this is what I have every thing seem to be working now, I uninstall the sata dvd-rw and installed a IDE dvd-rw, dma is enable now I just burned a dvd and it plays in my dvd player, thanks to all for your help

I burned a dvd but it won't play in my home dvd player, it players on my pc, my dvd player is a sony DVP-NS330, my media is verbatim dvd single layer, in the log it says my burner is ATA its not its a sata drive, I had write speed on 16x Imgburn log ImgBurn Version 2.4.1.0 - Log ; Sunday, 04 May 2008, 10:12:35 ; \\****************************************// ; ; I 09:39:08 ImgBurn Version 2.4.1.0 started! I 09:39:08 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 09:39:08 Total Physical Memory: 2,030,812 KB - Available: 1,337,560 KB I 09:39:08 Initialising SPTI... I 09:39:08 Searching for SCSI / ATAPI devices... I 09:39:09 Found 1 DVD-ROM and 1 DVD

this is what I have

I have uninstalled the primary and secondary ide in device manager and rebooted but its still the same, I don't have an option to uninstall the main controller entry, do you mean the IDE ATA/ATAPI controller if it is then when I right click on the IDE ATA/ATAPI controller the only option I get is scan for hardware changes and properties, can I uninstall it in the bios?

I've Tried everything and still can't get dma enabled, I looked in the bios and the burner is set to auto is that best setting to use or should I change it, there's few options like uldma 4 I don't really know much about it to tell the truth. I appreciate your help

Imgburn log ; //****************************************\\ ; ImgBurn Version 2.4.1.0 - Log ; Thursday, 01 May 2008, 18:12:04 ; \\****************************************// ; ; I 17:55:14 ImgBurn Version 2.4.1.0 started! I 17:55:14 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 17:55:14 Total Physical Memory: 2,030,812 KB - Available: 1,581,036 KB I 17:55:14 Initialising SPTI... I 17:55:14 Searching for SCSI / ATAPI devices... I 17:55:15 Found 1 DVD-ROM and 1 DVD

I put the burner on another sata port and burned at a fast speed as you suggested and it worked but i have another problem the video will play on my pc, but not in my dvd player I don't think its the my dvd player I've burned dvd before with Imgburn and never had a problem playing them in my player I'm using the same media I always use Verbatim.

Imgburn log //****************************************\\ ; ImgBurn Version 2.4.1.0 - Log ; Thursday, 01 May 2008, 09:47:35 ; \\****************************************// ; ; I 09:42:55 ImgBurn Version 2.4.1.0 started! I 09:42:55 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 09:42:55 Total Physical Memory: 2,030,812 KB - Available: 1,597,888 KB I 09:42:55 Initialising SPTI... I 09:42:55 Searching for SCSI / ATAPI devices... I 09:42:55 Found 1 DVD-ROM and 1 DVD

Thanks for all the help, I think I'll just stick with the excellent Imgburn, I just couldn't understand how Nerovision couldn't burn the same video file that Imgburn could burn, I just wanted to solve the problem, thank again for all the help. regards Dan

thanks for your help I've installed the VIA chipset drivers I'll post back later I can burn a video file with Imgburn but not with nero

thanks for your help I've installed the VIA chipset drivers I'll post back later

I've done that, its the same with secondary channel note current transfer mode, not applicable

If I right click on VIA channel the select properties this what I get

I don't know if this helps but all my drives are sata drives, hdd, dvd-rw, dvd-rom, do they still use IDE/ata controllers? I don't know I'm just a novice

Hi thanks for your help, I can't uninstall the IDE/ATA controller, I can see it but it doesn't give me an option to uninstall it, here is a snapshot of my device manager