Jump to content

pstein

Members
  • Posts

    42
  • Joined

  • Last visited

Posts posted by pstein

  1. I have a problem with WinExplorer under 64bit Win 7:

    I inserted a BlueRay or DVD media and want to see the content (approx 12 big zip files) in Windows Explorer.
    But WinExp does not show them (on the right side in details list).

    If I click on the drive in WinExplorer nothing happens.
    Only the Media label is shown beside the drive letter on the left side of WinExp.

    All other tools (e.g. Beyond Compare, Double Commander, Explorer++) show the the containing files successfully.
    Even a "dir" in CommandPrompt shows them.

    I can copy them to my hard disk.
    So the media BlueRay/DVD is not damaged.

    File System is UDF
    As I remember all worked fine a couple of weeks ago.
    Maybe I accidentially switched some settings.

     

    So why are they not listed in Windows Explorer?
    I burned them with ImgBurn

    This problem occurs with my two drives (LG and Asus) but not with my hard disks.

    So this seems to me an optical drive problem.

     

    Peter

  2. Occasionally  when I burn a set of archive files on a data DVD (with UDF file system) then I notice after an officially

    succesful burn session that the previous burn was not that successful as ImgBurn pretends.

     

    Sometimes long filenames were silently (!) cut.

     

    What I would expect is a warning popup prompt BEFORM burn session starts with a message like

     

    "Warning: filename "foo.....bar" is 7 chars too long and will be cut. Do you want to proceed?

     

    Can this feature be embedded in the next release?

     

    Thank you

    Peter

     

  3. Is there a way to find out the file system (ISO9960, Joliet, UDF, or combination of them) which was used when a DVD/BlueRay was originally burned?

     

    Even more: Can I find out the UDF version (if UDF was used)?

     

    Is it true that the file system support is a matter of the operating system and NOT of the hardware?

     

    So lets say all Windows 7 systems can (with burner hardware from the last 5 Years) read  UDF v2.60 medias?

     

    Correct?

     

    I want to use UDF v2.60 for data file backups. Any disadvantages?

     

    Peter

  4. I have got an audio CD where I found only some .cda files on it.

     

    They can be played in physical CD player.

     

    Assume I have some *.mp3 files on my hard disc and want to burn them in the same format

    as the mentioned existing CDs.

     

    What do I have to do in ImgBurn zu achieve this?

     

    With other words: Which "Mode" and options do I have to select?

     

    Do I have to convert the *.mp3 files first or is there an autoconvert inside ImgBurn?

     

    Peter

     

  5. Assume I have a couple of independent *.iso images. Each of them can be put on an own CD/DVD, then the computer booted and the actual application run.

    Think of e.g.
    Clonezilla *.iso,
    AVG Antivir *.iso and
    GParted *.iso

    Now I prefer not to burn 3 CDs for the three applications mentioned above.

    Instead I want to put the three *.iso on ONE CD/DVD then wrap them into an "Outer"/Wrapper"
    operating system.

    When booted the outer operation system should let the user choose which of the inner *.iso should be run afterwards. The menu selection can be simple.

    Is this possible somehow?

    Can ImgBurn (or another application you may know) generate such a selection boot code?

    Peter         

  6. Ok, I know, I cannot ADD more files to an already burned DVD/BlueRay but what about deleting one of them?

     

    I can imagine that there is a way to just delete such an existing file by overwriting the occpied space on the DVD/BlueRay by zeros.

     

    Or - alternatively - by overwriting the corresponding content table entry.

     

    is this possible?

     

    if yes: How exactly?

     

    Is your solution working with Jolliet AND UDF structures or only one of them?

     

    Peter

  7. I oftentimes save AVI files on a DVD+RW media and selected ISO9660 + UDF as file system.

    The AVI files (multiple files per disc media) are almost always (much) smaller than 2GB.

     

    When I start the burning process then Imgburn always suggests me with a prompt popup window to switch to

    ISO9660 + Joliet file system.

     

    I prefer UDF because it is newer and more comfortable. Almost all new hardware drives and OSs understand this. So why does IB prompts me for this old fashioned file system?

     

    How can I tell IB to avoid this prompt in future?

     

    Peter

  8. As you know there are two manufacturing styles of BlueRay media:

     

    HTL (more expensive but more robust and presumably longer life)

    and

    LTH (cheaper, more sensitive to temperature changes and sun light)

     

    How can I find out if a given BlueRay disc manufactured in LTH or HTL style?

    Of cause the original product packaging, invoice and seller contact address is not available any more.

     

    I could imagine that the serial number burned on the disc give this information.

     

    Is this true?

     

    How can I track down this information?

     

    Peter

  9. It's impossible to say that there's exactly X amount of space (bytes) available for file data.

     

    You have to take into account the number of files, the file system selection and various other options.

     

    The actual amount of free space on the disc is shown in the box on the right.

     

     

    The "Free space" value seems to be available only for "write" mode but NOT for "build" mode.

    Or did I miss something? I do not see "Free space" at least in the "Device" tab in "build" mode.

  10. It's in the box on the right when you're in Write mode.

     

     

    Hmm, that is the official but NOT the real size!

     

    Lets say I have a DVD+RW which has an official capacity of 4700372992 bytes.

    That is what is displayed in ImgBurn info box.

     

    Ok, now I switch to "Build" mode and dragged 10 (big) archive files onto the ImgBurn window.

    The total sum of all these 10 files is 4700312452 bytes.

    So it should fit on the DVD+RW and I started the burn process.

    But then ImgBurn stops and warns me that the media capacity is too small for burning all the stuff.

     

    I guess ImgBurn needs some extra amount of bytes to burn the management info data onto the DVD media as well.

    But how much is this (e.g. for MODE1/2048 ISO9660 + Joliet)?

     

    Can ImgBurn display this REALLY AVAILABLE capacity as well?

     

    The warning tells me something about 2.295.104 Sectors. How much ist this in bytes?

     

    Peter

  11. Use the drive as source for files, add what you want to them in Build mode and make an image that you'll burn after.

     

    On the Options tab on the right tick "Add To Queue When Done". After image has been created switch to Write mode and hit the big Burn button.

     

    Pretty automated. :)

     

    Hmm, sorry but I don't understand.

    I did so far:

    1.) Insert the DVD+RW with the already burned files e.g. 123.log

    2.) I opened ImgBurn in Build mode and "Options" tab

    3.) I cannot check "Add To Queue When Done" is disabled/grayed out

    so I cannot select it.

     

    Whats wrong?

  12. As far as I know ImgBurn is NOT able to burn Multi-Sessions.

     

    Assume I have 4 files already on a DVD+RW media. Now I want to add 2 more files.

     

    Ok, I could at first copy the existing 4 files manually to my hard disc and re-burn them together with the 2

    new files.

     

    But this process could somehow be automated.

     

    If the user adds further files then ImgBurn could start automatically the copy the existing files into "temp" folder on hard disc

    and burn them later automatically again.

     

    Can this feature be added in the next version?

     

    Thank you

    Peter

  13. Assume I have a DVD+RW or DVD-RW with some content.

     

    1.) How can I erase the content DVD completely (not only as "fast erase" of the content FAT)?

     

    I found no "erase all" menu in ImgBurn

     

    2.) How can I check if a DVD+RW /-RW is not damaged? In other words if the sectors on such a DVD

    are all valid, readable/writeable, consistent?

     

    If I simply read all existing files on a DVD to my hard disc it is only proven that the sectors currently filled with the content are valid.

    It is NOT guaranteed that free/unfilled sectors have not a damage/logical (surface) error.

     

    If it is not possible without writing: Can I do this with ImgBurn somehow with writing each sector and read it afterwards?

    How can I write+re-read each sector with ImgBurn?

     

    Peter

  14. Assume I have a DVD+RW with some (old) stuff on it.

    Then I want to overwrite the DVD+RW with some new files.

     

    When I start the burn process in ImgBurn then at first the user is informed that the old stuff has to be erased.

    And yes, there is a big, big erase phase prior to burning the really new files.

     

    Why does ImgBurn need such an additional time consuming "erase" step?

    Due to this unnecessary operation the burn process takes twice as much time as other programs

     

    Other burning programs like Nero or CDburnerXP just overwrite the existing data.

    Thats it.

     

    Can ImgBurn not just overwrite the content table entries?

     

    Maybe ImgBurn could offer the user an additional "full erase". But the default should be "quick erase"

     

    Peter

  15. You have to take into account the filesystem overhead. Try using only ISO9660 or UDF and it might fit in your disc.

     

    This is not true.

     

    Even when I burn with pure "UDF" the data on a DVD the error message popup appears.

     

    With Nero or CDburnerXP they are burned without problems.

     

    So again: this must be a bug of ImgBurn

     

    Peter

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.