[Continuos I/o Errors]

Burning at 8x or 12x should give the best results. From what we can see it looks like a low quality media issue, so you might want to try with Verbatim or Taiyo Yuden blanks.

 

Also, are you sure you're using the latest drivers available for your chipset? The controller shouldn't be identifying itself as Fibre.

I am using Moserbaer Pro one of the best ones here in India and i have been using his media as soon as i started burning Dvd's. I will try and find Verbatim here.The controller identifies itself as fibre from the day i have bought it. I will update the drivers and check whether the issue gets solved. Just another question after burning 3-4 dvds the writer also goes bad and has to be sent for replacement, this has happened to three of my writers.

[I/O Error on ImgBurn]

Not all problems are caused by the controller alone, you know. It would really help if you started a new thread in the support section and included a log from a failed burn.

Have Posted a new thread with Log Please do reply.

[Continuos I/o Errors]

Hi, I am in desperate need of help and don't know where to post

Everything was working Fine on my Pc uptil now. but recently i have started facing problems. i had one Moserbaer(Liteon) drive and one Sony AW-Q170A. Now whenever i Burn a Dvd using Imgburn the Dvd will Burn ok But When it will start to verify it will stop at 20% first and Show SCSi status code :0x02 and some errors. i tried burning more Dvd's thinking there is some problem with the media but the Percent at which the error came started to come just kept Decreasing 20-19-18-17 and so on both my drives failed. I got a new Sony DRU-V200S Tested it in my office it burnt 4 discs without a problem same using imgburn but at home after burning 2 discs it started giving the same errors Have tested the drives both on Vista Sp1 and Xp Sp3.Please somebody Help me i m in deep trouble.

 

System Specs

Asus P5NT-WS

Intel Q6600

2x2Gb DDR2 800Mhz

2*80Gb(Raid 0)

250*2 storage

8800Gt

 

Thanx for help in Advance

 

Below is the Imgburn Log

I 23:31:21 ImgBurn Version 2.4.2.0 started!

I 23:31:21 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 23:31:21 Total Physical Memory: 3,405,380 KB - Available: 2,144,724 KB

I 23:31:21 Initialising SPTI...

I 23:31:21 Searching for SCSI / ATAPI devices...

I 23:31:21 Found 1 DVD

[I/O Error on ImgBurn]

Hi there,

 

I have got the exact same error infact my three new drives got permanently after i started getting this error i am desperately waiting for someone reply on this error. Btw i have got a Nvidia 680i Lt Sli Chipset. Sorry for High-Jacking ur Thread

[ImgBurn v2.4.2.0 Released!]

Hi Luk, I am having problems and lots of conflicts of driver with Nvidia Chipsets. I have tried a number of Burners from Sony,Lg,Samsung to Moserbaer. Can u Please tell if this issue will be taken care of by the latest Version of Imgburn.

[Speed Seems Locked.]

Read the FAQ.

 

You have DMA issues.

 

Thanx for the reply have successfully enabled the Dma using a reset Vbs Script. Because was unable to do the setting using the standard steps.

many Thanks

[Speed Seems Locked.]

Hi,

I have an Lg drive and imgburn which seems to be locked to 1.4x burn 1.7-4.0x read on dvd i can't get it past that i changed the drive then too it is locked. Here is the Imgburn Log.

 

I 12:35:12 ImgBurn Version 2.4.1.0 started!

I 12:35:12 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 12:35:12 Total Physical Memory: 1,039,532 KB - Available: 265,296 KB

I 12:35:13 Initialising SPTI...

I 12:35:13 Searching for SCSI / ATAPI devices...

I 12:35:13 Found 1 DVD