Jump to content

veyronski

Members
  • Posts

    3
  • Joined

  • Last visited

veyronski's Achievements

ISF Newbie

ISF Newbie (1/5)

  1. Thanks, LUK. Followed your suggestion using USB2(laptop). Full erase failed, and ImgBurn suggested formatting before I could write on this disk. I went along with that and here is the data: I 15:10:56 ImgBurn Version 2.4.2.0 started! I 15:10:56 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 15:10:56 Total Physical Memory: 456,812 KB - Available: 110,576 KB I 15:10:56 Initialising ASPI... I 15:10:56 WNASPI32.DLL - frogaspi.dll - Frog ASPI - Version 0.29.4.10 I 15:10:56 Searching for SCSI / ATAPI devices... I 15:10:56 Found 1 DVD+R and 1 DVD
  2. Another example of
  3. Hi everybody I have decent desktop P4 (DVDR and CDRW drives, 80G HD) running XPhome. Everything runs fine exept for recent problem with USB LiteON SDW-431SX(latest firmware, connected via USB1) when trying to burn data DVD on DVD+-R or DVD+-RW. No problems with CD burns. When I burn new disk(DVDR or DVDRW),the software says the process has been completed, but the burned disk is invisible either on my machine or on another. If I try to erase such screwed DVD+RW, I get : 1-no disk in the drive 2-erasing appears to be happening, but I cannot write on that disk afterwards. 3-Windows explorer freezes So far I used NTI 7 Platinum, Nero 7. ExpressBurn. Before each change I cleaned up with Uniblue registry cleaner. Disks used DVD-R LiteOn, DVD+R Tesco, DVD+RW (Philips, Maxell,PCworld) ExpressBurn errors - UDF- sence data:03 0c 00 Iso+Joliet- sence data:05 30 10 NTI Error Code: 1003 CDB: 28 00 00 00 00 10 00 00 01 00 00 00 SenseKey:03 ASC:02 ASCQ:00 Nero error- ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: rewritable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: A492F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 01 4F 50 54 4F 44 49 - 53 43 4F 50 34 01 39 23 ..OPTODISCOP4.9# 00 9C 7C 64 02 28 00 96 - 7E 74 02 28 00 9C 7B 70 ..|d.(..~t.(..{p 02 28 04 04 10 F0 00 F0 - 00 00 00 00 00 00 00 01 .(.............. 19:15:26 #18 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 5:37,880 (337880ms) -> OK 19:15:26 #19 Text 0 File DVDPlusRW.cpp, Line 603 Start write address at LBA 0 DVD high compatibility mode: Yes 19:15:28 #20 SCSI -1046 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03580000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x06 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x06 19:15:28 #21 CDR -1046 File Writer.cpp, Line 301 Illegal disc 19:15:28 #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 19:15:29 #23 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 19:15:29 #24 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 19:15:29 #25 Phase 38 File dlgbrnst.cpp, Line 1800 Burn process failed at 2.4x (3,312 KB/s) Alchohol error: cannot format medium-incompatible medium 03 0c 00 write error ImgBurn error: I/O error cannot format media-Incompatible media I have tried "Upperfilters-Lower filters" trick, makes no difference. The most anoying thing is that DVD RW becomes unusable after just 1 burn!!! I need plain data writing on DVD, nothing else. Any advice would be greatly appreciated.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.