Jump to content

sesamoid

Members
  • Posts

    5
  • Joined

  • Last visited

sesamoid's Achievements

ISF Newbie

ISF Newbie (1/5)

  1. I am using AHCI, although have tried IDE. All working now though! Thanks again.
  2. Hi, Well Thanks for all your replies, been scratching my head about this one for months, as the problem only ever occurs if I update vista to SP1, tried clean install, moving SATA ports, all manner of bios settings. Turns out that after updating to SP1 I had to update my ICH9R driver and intel inf driver and now all is well, thanks so much for everyones help, should have been able to figure it out for myself but it helped a lot to have some advice as to where to start and what could or could not be responsible. Was on the verge of buying a new drive as well, so accept my paypal donation as thanks, should have donated earlier but better late than never.
  3. Hi have tried with the updated bios previously and has not made any difference. My bios is already set to IDE mode. Any other ideas? Thanks
  4. Have now tried in incremental mode after pressing F8 and this failed have attached the log file. Also tried in DAO mode after pressing F8 but the error happened exactly as it did before, but copied and pasted the log file as generated in the window as cannot close Imgburn itself. Hope this helps to shed some light on matters. Log_File_Imgburn.txt
  5. Hi, Firstly fantastic piece of software. Been using it a while now. My PC is self built with a gigbyte GA-P35-DS3 motherboard and a pioneer DVR-212 running Windows Vista Home Premium 32bit with SP1, have noticed a problem using imgburn before but after a recent reinstall of operating system can now confirm I can reproduce it. Essentially whenever I try and bun a SL or DL disc, DVD or Xbox 360 backup imgburn freezes, all starts out well then both the buffers run to zero after approx five minutes, the burn speed reads 0.0 and I'm unable to abort the burn, open my drive or quit imgburn through task manager, necessitating a restart from the power button on my PC and no details are saved to the log file. Now this only occurs after an update to SP1, prior to this all worked well, and can confirm this is the case now I have recently reinstalled my OS. My PC is using AHCI but I have no RAID configuration, have tried my bios set to AHCI, IDE but to no avail. Have tried the most recent firmware on my drive and also earlier versions. Have also seen the problem on the forum before in this post but unsure now whether the original poster did indeed have a faulty drive or if there is a bug somewhere. http://forum.imgburn.com/index.php?showtop...&hl=DVR-212 If the problem is unsolvable, which it may well be? Then could you point me to a list of supported drives so I can purchase a new DVD drive. Many thanks for all your hard work again. PS forgot to add this happens with at least three different sorts of media, Samsung Pleomax DVD-R 8x and Verbatims DL, changing the burn speed has no effect either.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.