[Burning dvd-r doesnt work]

Well mario kart and star wars: the force unleased don't work. And i cannot set my asus writer on book type dvd-r because asus is not in the list in imgburn.

 

And I have a asus mainboard and asus drives so I may hope it's fully compatible :S.

[Burning dvd-r doesnt work]

OK also with 12x i get the error:

 

I 10:57:06 ImgBurn Version 2.4.2.0 started!

I 10:57:06 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 10:57:06 Total Physical Memory: 3.143.428 KB - Available: 1.928.944 KB

I 10:57:06 Initialising SPTI...

I 10:57:06 Searching for SCSI / ATAPI devices...

I 10:57:26 Found 2 DVD

[Burning dvd-r doesnt work]

Well where can i buy them in the netherlands

[Burning dvd-r doesnt work]

you mean those?

 

http://www.opus.nl/produkten_detail.asp?l=ned&pdid=11181

[Burning dvd-r doesnt work]

I already tried the maximum speed with nero but i will try it with imgburn too tonight when i am at home.

 

And i need those -r for my nintendo wii... its better to use -r for it because +r wont work with the newest games.

[Burning dvd-r doesnt work]

I 23:14:02 ImgBurn Version 2.4.2.0 started!

I 23:14:02 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 23:14:02 Total Physical Memory: 3.143.428 KB - Available: 1.792.200 KB

I 23:14:02 Initialising SPTI...

I 23:14:02 Searching for SCSI / ATAPI devices...

I 23:14:22 Found 2 DVD

[Burning dvd-r doesnt work]

By the way:

 

I checked my Verbatims on the web. I have those:

 

Media color and text:

Silver Verbatim DVD Recordable 4.7 GB 120 Min 16X Certified

 

So it are real Verbatims... There should not be any problem burning those .

[Burning dvd-r doesnt work]

And this is when I burn a Maxell DVD+R with the same DVD-Burner...

 

I 22:35:22 ImgBurn Version 2.4.2.0 started!

I 22:35:22 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 22:35:22 Total Physical Memory: 3.143.428 KB - Available: 1.815.872 KB

I 22:35:22 Initialising SPTI...

I 22:35:22 Searching for SCSI / ATAPI devices...

I 22:35:22 Found 2 DVD

[Burning dvd-r doesnt work]

New log and error....

 

I 21:49:37 ImgBurn Version 2.4.2.0 started!

I 21:49:37 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 21:49:37 Total Physical Memory: 3.143.428 KB - Available: 1.814.716 KB

I 21:49:37 Initialising SPTI...

I 21:49:37 Searching for SCSI / ATAPI devices...

I 21:49:37 Found 2 DVD

[Burning dvd-r doesnt work]

Well do you know the place where I can find decent drivers then

[Burning dvd-r doesnt work]

Fibre is just another form of drive connectivity.

 

It's used by enterprise hard disks and certainly not something an optical drive should be reporting is in use.... and that's down to your drivers.

 

Unless you have an Intel chipset motherboard, don't install any board/controller drivers from the manufacturer.

 

A basic install of XP SP3 should work just fine.

 

Well I didnt install anything. I just use Vista Ultimate SP1 and put those drives in. Used the default drivers that came with Vista too... So what did I do wrong??? And how can I change it back to the good thing?

[Burning dvd-r doesnt work]

Destination Device: [3:0:0] ASUS DRW-2014L1T 1.02 (I:) (Fibre)

 

fibre??

what is it set up as in bios?

 

What does fibre mean?? I just reinstalled my pc with xp and guess what... It wont burn in there either now :s. I am totaly confused about it... Mbe those verbatims are not so good as I thought.. Or I just have bought the most crappiest dvd burners there are....

 

How can I see where those verbatims are made then?

[Burning dvd-r doesnt work]

13:03:28 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Toegang geweigerd

 

what is the reason in english?

check your filter drivers, tools-> filter driver load order

 

13:03:28 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Access Denied

 

But thats not the problem. Cause also when that error wasnt there it went failed

 

Check the attachment for it.

 

Speed the burn up a bit.

 

You might find your drive is better geared towards burning that media at higher speeds than lower ones.

 

I already did that too... Didn't help .

[Burning dvd-r doesnt work]

Hello all,

 

First i want to say Imgburn is the best thing i have ever used. But now i have a problem... It's not only with Imgburn but with ALL burning programs (Nero, Alcohol etc).

 

I have Windows Vista Ultimate 32 bit. And 2 Asus DRW-2014L1T (Firmware 1.02) drives. I just bought them and tested them with XP. All worked. Now I installed Vista and i have a problem with burning DVD-R media. I use Verbatim media. Burning DVD+R works fine but when I burn DVD-R I get the next error at 97%:

 

; //****************************************\\

; ImgBurn Version 2.4.2.0 - Log

; zondag, 12 oktober 2008, 13:49:50

; \\****************************************//

;

;

I 13:02:52 ImgBurn Version 2.4.2.0 started!

I 13:02:52 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 13:02:52 Total Physical Memory: 3.143.428 KB - Available: 2.066.524 KB

I 13:02:52 Initialising SPTI...

I 13:02:52 Searching for SCSI / ATAPI devices...

I 13:02:52 Found 1 DVD-ROM, 2 DVD