bter128

December 5, 2008

Are you using the latest beta version? v5.4.1.3 or something

Lots of people use it without any problems.

Nope, I was using 5.3.1.2.

I'll give it a try, many thanks!!

December 5, 2008

No, it doesn't help as this is ImgBurn Support Forum, not Ner0.

Anyway, make sure you have the latest Intel Matrix Storage drivers.

Thanks anyway, I pinpointed the problem to the presence of Virtual Clone Drive.

I removed it and everything is fine now..

December 5, 2008

It would appear your drive is resetting itself or the drivers are issuing a bus reset, I've no idea why that would be happening.

Which controller is your drive attached to?

It's a SATA drive, attached to INTEL ICH10 6 port SATA AHCI controller.

Here's the Nero log if it is of any help..

Windows Vista 6.0

IA32

WinAspi: -

NT-SPTI used

Nero Version: 9.0.9.100

Internal Version: 9, 0, 9, 100

Recorder: <HL-DT-ST BD-RE GGW-H20L>Version: YL05 - HA 1 TA 0 - 9.0.9.100

Adapter driver: <Serial ATA> HA 1

Drive buffer : 2048kB

Bus Type : default

CD-ROM: <ELBY CLONEDRIVE >Version: 1.2 - HA 1 TA 1 - 9.0.9.100

Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===

CdRomPeripheral : ELBY CLONEDRIVE 1.2 VClone Port 9 ID 0 DMA: Off

=== CDRom-Device-Map ===

HL-DT-ST BD-RE GGW-H20L G: CdRom0

ELBY CLONEDRIVE H: CdRom1

=======================

AutoRun : 1

Excluded drive IDs:

WriteBufferSize: 83886080 (0) Byte

BUFE : 0

Physical memory : 2047MB (2097151kB)

Free physical memory: 1922MB (1968448kB)

Memory in use : 42 %

Uncached PFiles: 0x0

Use Inquiry : 1

Global Bus Type: default (0)

Check supported media : Disabled (0)

5.12.2008

Burn BD Image

7:17:37 μμ #1 Text 0 File SCSIPTICommands.cpp, Line 450

LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

7:17:37 μμ #2 Text 0 File Burncd.cpp, Line 3563

Turn on Disc-At-Once, using Blu-ray Disc media

7:17:37 μμ #3 Text 0 File DlgWaitCD.cpp, Line 312

Last possible write address on media: 23652351 (5256:04.51, 46195MB)

Last address to be written: 18324831 (4072:11.06, 35790MB)

7:17:37 μμ #4 Text 0 File DlgWaitCD.cpp, Line 324

Write in overburning mode: NO (enabled: CD)

7:17:37 μμ #5 Text 0 File DlgWaitCD.cpp, Line 2951

Recorder: HL-DT-ST BD-RE GGW-H20L, Media type: BD-R (seq)

7:17:37 μμ #6 Text 0 File DlgWaitCD.cpp, Line 499

>>> Protocol of DlgWaitCD activities: <<<

=========================================

7:17:37 μμ #7 Text 0 File ThreadedTransferInterface.cpp, Line 756

Setup items (after recorder preparation)

0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1)

2 indices, index0 (150) not provided

original disc pos #0 + 18324832 (18324832) = #18324832/4072:11.7

not relocatable, disc pos for caching/writing not required/not required

-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 18324832 blocks [G: HL-DT-ST BD-RE GGW-H20L]

--------------------------------------------------------------

7:17:37 μμ #8 Text 0 File ThreadedTransferInterface.cpp, Line 958

Prepare [G: HL-DT-ST BD-RE GGW-H20L] for write in CUE-sheet-DAO

DAO infos:

==========

MCN: ""

TOCType: 0x00; Session Closed, disc fixated

Tracks 1 to 1: Idx 0 Idx 1 Next Trk

1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 37529255936, ISRC ""

DAO layout:

===========

0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00

0 | 1 | 0 | 0x41 | 0 | 0 | 0x00

0 | 1 | 1 | 0x41 | 18324832 | 18324832 | 0x00

18324832 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

7:17:37 μμ #9 Text 0 File SCSIPTICommands.cpp, Line 240

SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

7:17:37 μμ #10 Text 0 File Burncd.cpp, Line 4362

Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

7:17:37 μμ #11 Phase 24 File dlgbrnst.cpp, Line 1767

Caching of files started

7:17:37 μμ #12 Text 0 File Burncd.cpp, Line 4484

Cache writing successful.

7:17:37 μμ #13 Phase 25 File dlgbrnst.cpp, Line 1767

Caching of files completed

7:17:37 μμ #14 Phase 36 File dlgbrnst.cpp, Line 1767

Burn process started at 4x (17.980 KB/s)

7:17:38 μμ #15 Text 0 File ThreadedTransferInterface.cpp, Line 2675

Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

7:17:38 μμ #16 Text 0 File Cdrdrv.cpp, Line 10187

---- Disc Structure (BD): Disc Information on BD (00h) ----

Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098

--- Header ---

Disc Information Identifier: <DI>

Disc Information Format: 01 h

Number of DI Units/Aux Frames in each DI block: 8

Number of (recording) layer to which this DI Unit applies: 0

DI unit Sequence Number in DI Block: 0

Continuation flag: Next DI Unit is the start of a new set of parameters (0)

Number of DI bytes in use in this DI unit: 98

--- Body ---

Disc Type Identifier: <BDR>

Disc Size/Class/Version: 1

DI Unit Format dependent contents:

BD Structure: 34 (22 h):

2 recording layer (DL), BD-R

Hybrid Disc identifier/Channel bit length: 1 (1 h):

no DVD layer present, no CD layer present

channel bit length of 74,5 nm (25.0 GB max. per layer)

Push-Pull polarity flag bits: 00 h

Recorded mark polarity flag bits: 00 h

BCA descriptor: BCA-code present (1)

Maximum transfer rate needed by the application: 0 Mbit/s

Data zone allocation:

First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072)

Last Physical ADIP Address of the Data Zone of the related layer (LAA): 00194E7E h (1658494)

Recording velocities:

Nominal Recording Velocity: 4.92 m/s (1EC h)

Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1

Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1

...

22 01 00 00 01 00 00 00 - 00 00 00 00 00 02 00 00

00 19 4E 7E 01 EC 64 64 - 46 46 46 46 3C 3C 3C 3C

00 00 00 00 AA 60 6A 05 - 05 36 1C 80 90 20 20 20

20 20 20 20 20 30 30 30 - 30 70 00 70 00 70 00 70

00 68 00 68 00 68 00 68 - 00 68 00 68 00 68 00 68

00 90 90 C0 C0 C0 00 00

--- Trailer ---

Disc Manufacturer ID: 54 44 4B 42 4C 44 h <TDKBLD>

Media Type ID: 52 46 42 <RFB>

Time Stamp [m:y]: 0 : 0000 (00 00 h)

Product Revision Number: 0

7:21:41 μμ #17 SPTI -1169 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)

CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x04

Sense Qual: 0x04

Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 D4 04 04 00 80

Buffer x0550d780: Len x20

7:21:41 μμ #18 SPTI -1169 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)

CDB Data: 0xAD 01 00 00 00 00 00 0A 08 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x04

Sense Qual: 0x04

Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 D4 04 04 00 80

Buffer x0806f440: Len x800

7:21:41 μμ #19 Text 0 File BD.cpp, Line 520

Format BD-R with Format Type 0h, sub-type 1, spare area size 0 -> return code 0

Allocated spare area size on disc 0

BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),

spare area allocation: allocation (1), Stream recording: NO (0); return code -1169

7:21:41 μμ #20 CDR -1169 File ThreadedTransferInterface.cpp, Line 1682

Logical unit not ready, operation in progress

G: HL-DT-ST BD-RE GGW-H20L

7:21:41 μμ #21 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1682

Could not perform start of Disc-at-once

7:21:41 μμ #22 SPTI -1169 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)

CDB Data: 0x5A 00 05 00 00 00 00 00 48 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x04

Sense Qual: 0x04

Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 D4 04 04 00 80

Buffer x0802c880: Len x48

7:21:41 μμ #23 Text 0 File DVDPlusDualLayer.cpp, Line 1424

SetDriveCaps: Set LAST LBA of layer 1 to 0

7:21:41 μμ #24 Text 0 File ThreadedTransfer.cpp, Line 273

Pipe memory size 83836800

7:21:41 μμ #25 Phase 38 File dlgbrnst.cpp, Line 1767

Burn process failed at 4x (17.980 KB/s)

7:21:42 μμ #26 SPTI -1169 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)

CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x04

Sense Qual: 0x04

Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 D4 04 04 00 80

7:21:42 μμ #27 Text 0 File SCSIPTICommands.cpp, Line 287

SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

7:21:42 μμ #28 SPTI -1169 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)

CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x04

Sense Qual: 0x04

Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 D4 04 04 00 80

7:21:42 μμ #29 SPTI -1169 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)

CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x04

Sense Qual: 0x04

Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 D4 04 04 00 80

7:21:42 μμ #30 SPTI -1169 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)

CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x04

Sense Qual: 0x04

Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 D4 04 04 00 80

7:21:42 μμ #31 Text 0 File Cdrdrv.cpp, Line 11444

DriveLocker: UnLockVolume completed

7:21:42 μμ #32 Text 0 File SCSIPTICommands.cpp, Line 450

UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

December 5, 2008

Hello!

I've been experiencing problems when I'm trying to burn BD-R DL discs with my brand new LG bluray burner (GGW-H20L with the latest -YL05- firmware).

I tried several Panasonic BD-R DL (MEI T01-001) and in every occasion the writing process fails at about 50%..

I also tried TDK's BD-R DL (TDKBLD-RFB-00), however the problem remains, the discs turn to useless coasters..

In the meantime the burner writes flawlessly any BD-R 25GB, DVDs and CDs that I throw in, even my TDK BD-RE DL (50GB) (TDKBLD-wfa-00).

Is there an incompatibility with the above mentioned media or is there a problem with my burner? Has anyone used them succesfully?

I would be obliged if you could help..

Here is the log:

I 12:51:01 ImgBurn Version 2.4.2.0 started!

I 12:51:01 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 12:51:01 Total Physical Memory: 3.405.948 KB - Available: 1.347.520 KB

I 12:51:01 Initialising SPTI...

I 12:51:01 Searching for SCSI / ATAPI devices...

I 12:51:10 Found 1 BD-ROM and 1 BD-RE/HD DVD-ROM!

I 12:51:45 Operation Started!

I 12:51:45 Source File: E:\D.iso

I 12:51:45 Source File Sectors: 18.324.832 (MODE1/2048)

I 12:51:45 Source File Size: 37.529.255.936 bytes

I 12:51:45 Source File Volume Identifier: DAT

I 12:51:45 Source File Volume Set Identifier: 3958A54901179C3F

I 12:51:45 Source File Application Identifier: ImgBurn v2.4.2.0

I 12:51:45 Source File Implementation Identifier: ImgBurn

I 12:51:45 Source File File System(s): UDF (2.50)

I 12:51:45 Destination Device: [7:0:0] HL-DT-ST BD-RE GGW-H20L YL05 (G:) (ATA)

I 12:51:45 Destination Media Type: BD-R (Disc ID: TDKBLD-RFB-00) (Speeds: 2x; 4x)

I 12:51:45 Destination Media Sectors: 24.438.784

I 12:51:45 Write Mode: BD

I 12:51:45 Write Type: DAO

I 12:51:45 Write Speed: MAX

I 12:51:45 BD-R FastWrite: No

I 12:51:45 Link Size: Auto

I 12:51:45 Test Mode: No

I 12:51:45 OPC: No

I 12:51:45 BURN-Proof: Enabled

I 12:53:01 Filling Buffer... (40 MB)

I 12:53:01 Writing LeadIn...

I 12:53:02 Writing Session 1 of 1... (1 Track, LBA: 0 - 18324831)

I 12:53:02 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 18324831)

W 14:37:21 Failed to Write Sectors 5619840 - 5619871 - Reason: Power On, Reset, or Bus Device Reset Occurred

W 14:37:21 Retrying (1 of 20)...