Gandy
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Gandy
-
-
I seem to be getting I/O errors in the verify stage. The reason in the log is Timeout on Logical Unit. Here's a posting of my log.
I 16:55:58 ImgBurn Version 2.4.4.0 started!
I 16:55:58 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 16:55:58 Total Physical Memory: 2,096,620 KB - Available: 1,581,432 KB
I 16:55:58 Initialising SPTI...
I 16:55:58 Searching for SCSI / ATAPI devices...
I 16:55:58 Found 1 DVD
-
No, miscompares are not 'normal'.
It's weird that you should be getting them at all to be honest. You expect to see errors reading back dodgy burns, not miscompares.
It almost looks like corruption - either in memory (test your system with memtest) or with the controller running the hdds/optical drives.
All right I just ran memtest for about 8.5 hours and it didn't find an error while scanning. I thought it might be a memory issue just because everyone once in a while(maybe once or twice a month) I'll get a BSOD. Is there anyway to test out the controller for my hdd/optical drives?
-
Try burning one at 4x then
Just tried another at 4x I got one error this time around 75%, and a few others later so it's still a decent number of errors. Like I said before I don't know if this is normal for xbox discs or what. I think I've made 3 coasters, which kinda sucks considering it's verbatim. Here's the log again if you need it. There's a time gap in the log just because I let it running for a bit and came back to it a few hours later. I tried burning a different img this time for your reference.
I 23:20:23 ImgBurn Version 2.4.2.0 started!
I 23:20:23 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 23:20:23 Total Physical Memory: 2,096,620 KB - Available: 1,356,372 KB
I 23:20:23 Initialising SPTI...
I 23:20:23 Searching for SCSI / ATAPI devices...
I 23:20:23 Found 1 DVD
-
Where are your Verbatim blanks made? It's written in the packaging. You may want to try burning one at 4x to see how it turns out.
Singapore
On the disk is says 2.4x but it says up to 6x on the packaging.
-
Hi I tried to burn a 360 game and imgburn finds errors in the verify stage. The burn goes through fine, but it fails in multiply places when it tries to verify. Is this normal? I'm using verbatim media and recording at 2.4x There were about three errors when I got to 21% or so so I just stopped the verify. Here's a log
I 15:14:45 ImgBurn Version 2.4.2.0 started!
I 15:14:45 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 15:14:45 Total Physical Memory: 2,096,620 KB - Available: 1,557,016 KB
I 15:14:45 Initialising SPTI...
I 15:14:45 Searching for SCSI / ATAPI devices...
I 15:14:45 Found 1 DVD
I/O Error on Verify
in ImgBurn Support
Posted
So is my drive going bad and I should get a new one or do I have a crappy quality drive or is it something wrong with the computer?