Superkaka1983

Thanks i'll try what you mentioned Yeah, i was thinking that my burner is too old, it is about five years old now. Any burners you would recommend?

Hello again, Anyone able to help on why im getting these errors. Im using Verbatim DVD+R DL. Is it the firmware? I had to recently reboot my computer to factory settings and im now using Vista due to viruses. Heres the log, thanks in advance - I 10:45:02 ImgBurn Version 2.5.1.0 started! I 10:45:02 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000) I 10:45:02 Total Physical Memory: 981,824 KB - Available: 495,360 KB I 10:45:02 Initialising SPTI... I 10:45:02 Searching for SCSI / ATAPI devices... I 10:45:02 -> Drive 1 - Info: HL-DT-ST DVDRRW GWA-4164B 1.05 (D:) (ATA) I 10:45:02 Found 1 DVD±RW! I 10:47:49 Operation Started! I 10:47:49 Source File: C:\Users\Mark\Downloads\Mafia 2 Region Free XBOX 360\Mafia 2.iso I 10:47:49 Source File Sectors: 3,827,488 (MODE1/2048) I 10:47:49 Source File Size: 7,838,695,424 bytes I 10:47:49 Source File Volume Identifier: DVD_ROM I 10:47:49 Source File Volume Set Identifier: ec67c000MS UDFBridge I 10:47:49 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 10:47:49 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 10:47:49 Source File File System(s): ISO9660, UDF (1.50) I 10:47:49 Destination Device: [5:0:0] HL-DT-ST DVDRRW GWA-4164B 1.05 (D:) (ATA) I 10:47:49 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x) I 10:47:49 Destination Media Sectors: 4,173,824 I 10:47:49 Write Mode: DVD I 10:47:49 Write Type: DAO I 10:47:49 Write Speed: 2.4x I 10:47:49 Link Size: Auto I 10:47:49 Lock Volume: Yes I 10:47:49 Test Mode: No I 10:47:49 OPC: No I 10:47:49 BURN-Proof: Enabled W 10:47:49 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x) I 10:47:49 Book Type Setting: DVD-ROM I 10:47:49 User Specified L0 Data Zone Capacity: 1,913,760 I 10:47:50 Set L0 Data Zone Capacity Succeeded! I 10:47:50 Filling Buffer... (20 MB) I 10:47:50 Writing LeadIn... I 10:48:24 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 10:48:24 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 10:48:24 Writing Layer 0... (LBA: 0 - 1913759) I 11:00:13 Writing Layer 1... (LBA: 1913760 - 3827487) W 11:02:27 Failed to Write Sectors 2140640 - 2140671 - Reason: Unknown (Vendor Unique) (ASC: 0x80, ASCQ: 0x04) W 11:02:27 Retrying (1 of 20)... W 11:02:27 Retry Failed - Reason: No Seek Complete W 11:02:27 Retrying (2 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (3 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (4 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (5 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (6 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (7 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (8 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (9 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (10 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (11 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (12 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (13 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (14 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (15 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (16 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (17 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (18 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (19 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:02:27 Retrying (20 of 20)... W 11:02:27 Retry Failed - Reason: Invalid Address For Write W 11:14:56 Retrying (21)... W 11:14:56 Retry Failed - Reason: Invalid Address For Write W 11:14:57 Retrying (22)... W 11:14:57 Retry Failed - Reason: Invalid Address For Write E 11:14:59 Failed to Write Sectors 2140640 - 2140671 - Reason: Unknown (Vendor Unique) (ASC: 0x80, ASCQ: 0x04) E 11:14:59 Next Writable Address: 2140640 I 11:15:00 Synchronising Cache... W 11:15:06 User opted to skip the 'Close Track/Session/Disc' functions. E 11:15:06 Failed to Write Image! I 11:15:06 Exporting Graph Data... I 11:15:06 Graph Data File: C:\Users\Mark\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRRW_GWA-4164B_1.05_SUNDAY-SEPTEMBER-12-2010_10-47_AM_MKM-003-00_2.4x.ibg I 11:15:06 Export Successfully Completed! E 11:15:06 Operation Failed! - Duration: 00:27:16 I 11:15:06 Average Write Rate: 2,684 KB/s (1.9x) - Maximum Write Rate: 5,603 KB/s (4.0x)

Thanks, yeah it was a problem with the file rather than imgburn. Thanks pal!

Hi all, I have had this problem with my last few burns using Imgburn, when trying to add a file to burn I am getting the error message - cannot open file, Reason - the system cannot find the file specified. Any help would be much appreciated. Cheers

Thanks for getting back to me, its a packard bell. Where can I upgrade firmware on it from? Excuse my ignorance, but I have no idea what xp sp3 is... I'll update imgburn now, thanks again

Hi all, Hope you can help, im getting some problems when burning, dvd's and also xbox 360 games. On the DVD's the film will usually start skipping between 9-12 mins, and on some xbox titles I get, either disc dirty or it just stalls when trying to load the title screen. Im using Verbatim discs, and do get a lot of successful writes, but I am recently starting to get a few games and films with problems. Heres my last log below,its of a xbox360 game that stops in the same place every time, any suggestions are greatly appreciated. Cheers Mark I 09:35:34 ImgBurn Version 2.4.2.0 started! I 09:35:34 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 09:35:34 Total Physical Memory: 982,384 KB - Available: 463,464 KB I 09:35:34 Initialising SPTI... I 09:35:34 Searching for SCSI / ATAPI devices... I 09:35:53 Found 1 DVD±RW! I 09:35:56 Operation Started! I 09:35:56 Source File: C:\Documents and Settings\mark\My Documents\Downloads\Red Dead Redemption [RF] [X360] [www.spatorrent.com]\rdr.dvd I 09:35:56 Source File Sectors: 3,827,488 (MODE1/2048) I 09:35:56 Source File Size: 7,838,695,424 bytes I 09:35:56 Source File Volume Identifier: DVD_ROM I 09:35:56 Source File Volume Set Identifier: ec67c000MS UDFBridge I 09:35:56 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 09:35:56 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 09:35:56 Source File File System(s): ISO9660, UDF (1.50) I 09:35:56 Destination Device: [4:0:0] HL-DT-ST DVDRRW GWA-4164B 1.05 (D:) (ATA) I 09:35:56 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x) I 09:35:56 Destination Media Sectors: 4,173,824 I 09:35:56 Write Mode: DVD I 09:35:56 Write Type: DAO I 09:35:56 Write Speed: 2.4x I 09:35:56 Link Size: Auto I 09:35:56 Test Mode: No I 09:35:56 OPC: No I 09:35:56 BURN-Proof: Enabled I 09:35:56 Book Type Setting: DVD-ROM I 09:35:56 Optimal L0 Data Zone Capacity: 1,913,760 I 09:35:56 Optimal L0 Data Zone Method: Copied From Original Disc I 09:35:56 Filling Buffer... (20 MB) I 09:35:57 Writing LeadIn... I 09:36:53 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 09:36:53 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 09:36:53 Writing Layer 0... (LBA: 0 - 1913759) I 09:48:43 Writing Layer 1... (LBA: 1913760 - 3827487) I 10:00:34 Synchronising Cache... I 10:00:57 Closing Track... I 10:01:49 Finalising Disc... I 10:01:57 Exporting Graph Data... I 10:01:57 Graph Data File: C:\Documents and Settings\mark\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRRW_GWA-4164B_1.05_19-MAY-2010_09-35_MKM-003-00_2.4x.ibg I 10:01:57 Export Successfully Completed! I 10:01:57 Operation Successfully Completed! - Duration: 00:26:01 I 10:01:57 Average Write Rate: 5,390 KB/s (3.9x) - Maximum Write Rate: 5,618 KB/s (4.1x)

Thanks guys, the burn went fine, just errored on the verify. Ive put two films on the one disc, the second seems to be jumping quite a lot, but the first seems perfect. Again thanks for helping out, i'll try some more and let you know how it goes. Cheers!!!!

Thanks very much, both of you, i'll try them out and let you know how I got on. Fingers crossed!!

Hi everyone, I done my best to try read through similar posts, but still cant get my ImgBurn to work. It was all fine at the beginning, I had a few discs lying around the house (from Lidl) that worked perfectly, but couldnt get the same ones again. Got some verbatims as recommended, but still no joy. Any ideas would be greatly appreciated. I 19:00:45 ImgBurn Version 2.4.2.0 started! I 19:00:45 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 19:00:45 Total Physical Memory: 982,384 KB - Available: 616,200 KB I 19:00:46 Initialising SPTI... I 19:00:46 Searching for SCSI / ATAPI devices... I 19:00:46 Found 1 DVD