[Question to the "Write Speed" in ImgBurn]

The BenQ Support said to me, I should the firmware BSLB or BSMB to use.

One did not want to say details to me. One has also sent me immediately both firmware.

I must probably trust the Support.

 

Bye

[Question to the "Write Speed" in ImgBurn]

are they real yudens?

 

Surface: white printable

Media Code: YUDEN000-T02-00

Labelling (ring): TG/PG

 

And as already said...

Tomorrow I ask the BenQ Support.

It is also possible, the BenQ is quite defective after 2 months. #39;(

[Question to the "Write Speed" in ImgBurn]

Here a PIPO Scan with 4x and 8x burn. My BenQ drive, the 'Device Buffer' fluctuates between 85% and 95%.

 

 

 

 

If is only my personal opinion, but I may with 4x write speed rather.

Tomorrow I will ask the BenQ Support.

[Question to the "Write Speed" in ImgBurn]

Thanks for the answers,

 

If one uses QSuite, it is recommended always as a write speed 4x for the TY.

Also I see a clear difference between 4x and 8x writing speed with the TY.

A new firmware will probably solve the problem.

 

It is funny, only if I use Record Now, the drive does not throttle the burning speed.

It happens always only in ImgBurn (therefore my question).

 

If the new version of ImgBurn is available, I try it over again.

 

Thanks!

[Question to the "Write Speed" in ImgBurn]

If one burns an image with ImgBurn, most time the adjusted write speed used.

Sometimes I have the problem that the adjusted write speed is ignored.

 

I 22:31:55 ImgBurn Version 1.2.0.0 started!

I 22:31:55 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 22:31:55 Initialising SPTI...

I 22:31:55 Searching for SCSI / ATAPI devices...

I 22:31:55 Found 2 DVD-ROMs and 1 DVD?RW!

I 22:32:07 Operation Started!

I 22:32:07 Source File: G:\Fertige Images\TEST.MDS

I 22:32:07 Source File Sectors: 2.278.171 (MODE1/2048)

I 22:32:07 Source File Size: 4.665.694.208 bytes

I 22:32:07 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING

I 22:32:07 Source File Implementation Identifier: mkisofs

I 22:32:07 Destination Device: [1:1:0] BENQ DVD DD DW1640 BSOB (I:) (ATA)

I 22:32:07 Destination Media Type: DVD+R (Disc ID: YUDEN000-T02-00) (Speeds: 2,4x; 4x; 8x)

I 22:32:07 Destination Media Sectors: 2.295.104

I 22:32:07 Write Mode: DVD

I 22:32:07 Write Type: DAO

I 22:32:07 Write Speed: 4x

I 22:32:07 Link Size: Auto

I 22:32:07 Test Mode: No

I 22:32:07 BURN-Proof: Enabled

I 22:32:08 Filling Buffer...

I 22:32:09 Writing LeadIn...

I 22:32:50 Writing Image...

I 22:56:57 Synchronising Cache...

I 22:56:58 Closing Track...

I 22:57:05 Finalising Disc...

I 22:57:38 Exporting Graph Data...

I 22:57:38 Graph Data File: C:\Dokumente und Einstellungen\Tobi\Eigene Dateien\Eigene Bilder\ImgBurn Graph Data\BENQ_DVD_DD_DW1640_BSOB04-03-2006YUDEN000-T02-004xTEST(7).ibg

I 22:57:38 Export Successfully Completed!

I 22:57:38 Operation Successfully Completed! - Duration: 00:25:29

I 22:57:38 Average Write Rate: 3.150 KB/s (2.3x) - Maximum Write Rate: 3.347 KB/s (2.4x)

I 22:57:38 Cycling Tray before Verify...

W 22:57:45 Waiting for device to become ready...

I 22:57:54 Device Ready!

I 22:57:54 Operation Started!

I 22:57:54 Source Device: [1:1:0] BENQ DVD DD DW1640 BSOB (I:) (ATA)

I 22:57:54 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: YUDEN000-T02-00) (Speeds: 2,4x; 4x; 8x)

I 22:57:54 Image File: G:\Fertige Images\TEST.MDS

I 22:57:54 Image File Sectors: 2.278.171 (MODE1/2048)

I 22:57:54 Image File Size: 4.665.694.208 bytes

I 22:57:54 Image File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING

I 22:57:54 Image File Implementation Identifier: mkisofs

I 22:57:54 Verifying Sectors...

I 23:03:07 Exporting Graph Data...

I 23:03:08 Graph Data File: C:\Dokumente und Einstellungen\Tobi\Eigene Dateien\Eigene Bilder\ImgBurn Graph Data\BENQ_DVD_DD_DW1640_BSOB04-03-2006YUDEN000-T02-004xTEST(7).ibg

I 23:03:08 Export Successfully Completed!

I 23:03:08 Operation Successfully Completed! - Duration: 00:05:13

I 23:03:08 Average Verify Rate: 14.557 KB/s (10.5x) - Maximum Verify Rate: 18.987 KB/s (13.7x)

 

The same was noticeable to me, if one accomplishes only the TEST MODE and burns then the image.

The TEST MODE runs with 4x and afterwards with 2,4x is written.

 

I am not sure whether does it concern here a possible bug?

A little help or an explanation like this can happen, would be nice.