midimaster

Still waiting for 2.4x DVD+R DL's to be delivered, I was simply trying to burn at 6x speed again.. Now to my surprise it went wrong at 6x also! This error occured: I 16:17:38 ImgBurn Version 2.4.4.0 started! I 16:17:38 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 16:17:38 Total Physical Memory: 2.095.180 KB - Available: 844.344 KB I 16:17:38 Initialising SPTI... I 16:17:38 Searching for SCSI / ATAPI devices... I 16:17:57 Found 1 DVD-ROM, 1 DVD-ROM/CD-RW, 1 DVD

Ok, at 6x speed the DVD DL 's burn fine.. (although they won't work at my xbox360).. so you suspect I use the wrong DVD+R DL? Tnx anyway for answering (although it was a Ner0 question, i was simply filtering things..).

Tried to burn a DVD9 movie at 4x speed with NERO, got this (don't want to lose any more DVD DL's): Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17-7-2002 11:03:20 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 13:54:32 NT-SPTI used Nero Version: 6.6.1.15 Internal Version: 6, 6, 1, 15 Recorder: <HL-DT-ST DVD-RAM GH22NP20>Version: 1.03 - HA 1 TA 4 - 6.6.1.15 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <WV3501A QXR349R >Version: 1.0 - HA 1 TA 2 - 6.6.1.15 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === CdRomPeripheral : TSSTcorp CDRW/DVD TSH492B atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-RAM GH22NP20 atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD800JD-75JNA0 atapi Port 1 ID 0 DMA: On DiskPeripheral : Hitachi HDT725032VLA360 atapi Port 1 ID 1 DMA: On CdRomPeripheral : WV3501A QXR349R 1.0 ajbiv0ry Port 2 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVD-RAM GH22NP20 E: CDRom4 TSSTcorp CDRW/DVD TSH492B F: CDRom0 WV3501A QXR349R H: CDRom2 SanDisk Cruzer K: CDRom6 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2046MB (2095180kB) Free physical memory: 1046MB (1071264kB) Memory in use : 48 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.5.2009 DVD-image branden 17:21:21 #1 Text 0 File SCSIPTICommands.cpp, Line 403 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 17:21:22 #2 Text 0 File Burncd.cpp, Line 3316 Turn on Disc-At-Once, using DVD media 17:21:22 #3 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 3716143 (825:48.43, 7258MB) 17:21:22 #4 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 17:21:22 #5 Text 0 File DlgWaitCD.cpp, Line 2616 Recorder: HL-DT-ST DVD-RAM GH22NP20, Media type: DVD+R9 Double Layer Disc Manufacturer ID: MKM, Media Type ID: 003, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 17:21:22 #6 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 17:21:22 #7 Text 0 File ThreadedTransferInterface.cpp, Line 814 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 3716144 (3716144) = #3716144/825:48.44 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3716144 blocks [HL-DT-ST DVD-RAM GH22NP20] -------------------------------------------------------------- 17:21:22 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1013 Prepare recorder [HL-DT-ST DVD-RAM GH22NP20] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7610662912, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 3716144 | lead-out | 1 | 0x41 | 0x00 17:21:22 #9 Text 0 File SCSIPTICommands.cpp, Line 208 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 17:21:22 #10 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 17:21:22 #11 Text 0 File Burncd.cpp, Line 4158 Cache writing successful. 17:21:22 #12 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 17:21:22 #13 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 4x (5.540 kB/sec) 17:21:22 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2717 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 17:21:22 #15 SPTI -1066 File SCSIPassThrough.cpp, Line 178 CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 Buffer x06010180: Len x648 17:21:22 #16 Text 0 File DVDPlusDualLayer.cpp, Line 466 Disc finalized, LBA total Image size: 3716144 (7258MB), Last LBA L0: 1858079 (3629MB) 17:21:22 #17 Text 0 File DVDPlusDualLayer.cpp, Line 631 L0 Data Zone Capacity set to 1858080 (1C5A20h, 3629MB) -> OK, confirmed setting 17:21:22 #18 CDR -1205 File DVDPlusDualLayer.cpp, Line 658 Burning Layer 1 17:21:22 #19 Text 0 File DVDPlusDualLayer.cpp, Line 668 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 17:21:22 #20 Text 0 File Cdrdrv.cpp, Line 8737 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: FCFFFF h End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MKM..... Media type ID: 003 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 03 4D 4B 4D 00 00 - 00 00 00 30 30 33 00 40 ...MKM.....003.@ 25 25 37 0C 02 2D 66 02 - 2D 66 21 23 0D 0E 14 14 %%7..-f.-f!#.... 02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00 .....!#......... 17:21:22 #21 Text 0 File DVDR.cpp, Line 5715 Drive: HL-DT-ST DVD-RAM GH22NP20 Book Type request [LG]: DVD-ROM Changing the Book Type was finished successfully, return code 0 17:21:22 #22 CDR -1207 File DVDR.cpp, Line 5645 Book Type automatically set to: DVD-ROM 17:21:22 #23 SPTI -1066 File SCSIPassThrough.cpp, Line 178 CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 Buffer x06011080: Len x648 17:21:22 #24 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 17:31:21 #25 SPTI -1135 File SCSIPassThrough.cpp, Line 178 CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 17 8F 20 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x0adef100: Len x10000 0x00 00 01 BA 44 EA C4 ED B6 03 01 89 C3 F8 00 00 0x01 BD 07 EC 81 80 05 21 3A B1 55 B5 81 01 04 25 0xBA 08 A8 96 05 88 EB 99 86 4E 46 F4 BB 14 25 95 17:31:21 #26 CDR -1135 File Writer.cpp, Line 281 Write error E: HL-DT-ST DVD-RAM GH22NP20 17:31:27 #27 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 4x (5.540 kB/sec) 17:31:28 #28 Text 0 File SCSIPTICommands.cpp, Line 253 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 17:31:33 #29 Text 0 File Cdrdrv.cpp, Line 9945 DriveLocker: UnLockVolume completed 17:31:34 #30 Text 0 File SCSIPTICommands.cpp, Line 403 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 8-3-2007 1:51:00 File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17-7-2002 10:05:10 File 'Drivers\PXHELP20.SYS': Ver=3.00.67a, size=43872 bytes, created 23-2-2008 4:38:33 (Prassi/Veritas driver for win 2K) File 'Drivers\scsiport.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96384 bytes, created 13-4-2008 20:40:30 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

I'm trying to find out if my burner, media or .iso is bad. I cannot trace the error's because they appear without reason. Sometimes I can write a DL-Disc without a problem, the next time I got an error. Here's my log, i use a LG GH22 burner (but already tried it with a Lite-on and NEC also) and I use Verbatim DL+R. In this case I'm trying to burn a xbox360 game. I 12:16:59 ImgBurn Version 2.4.4.0 started! I 12:16:59 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 12:16:59 Total Physical Memory: 2.095.180 KB - Available: 896.212 KB I 12:16:59 Initialising SPTI... I 12:16:59 Searching for SCSI / ATAPI devices... I 12:16:59 Found 1 DVD-ROM, 1 DVD-ROM/CD-RW, 1 DVD