Hans L
-
Posts
23 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Hans L
-
-
I got a similar download cancellation message from NIS when I tried to download from mirror 6 (yes, it was mirror 78 before). So, the fact that the download site (7) has not changed in 2 years does not seem to be the issue, but the file itself. I do not suspect anything intentional, but perhaps a little check of the file would not be so bad?
Regards,
Hans L
-
Hello:
When I downloaded the latest ImgBurn a minute ago, it was removed by Norton Internet Security. Details:
http://download.imgbrun.SetupImgBurn_2.5.8.0.exe
Downloaded File aeaevb+i.exe.part Trheat nameL Suspicious.Cloud.2 from imgburn.com
("part" is from file only being partially downloaded.)
Does anyone know anything about this. I am not sure what to do.
Thanks,
Hans L
-
There's a guide for burning Audio CDs in the Guides forum.
Thank you,. Will look there!
Hans L
-
A friend suggested fre:ac, which I used as a converter to MP3. I can now play on my simple(small) boonbox, but not on my Bluray player (which I do not need to). However, it would be good to know what format it takes. I will look it up, but if anyone has a comment, I would appreciate it.
Regards,
Hans L
-
What I have is a WMA (audio, of course) file that I need to convert. Sorry that I am so scattered!
Hans L
-
Maybe you need to convert your files to regular DVD Video set of files.
Try DVDFlick or DVDStyler.
Thank you ianymaty!
Will try.
Hans L
-
I do not know how my log should be posted. I though I saw something about attachments, but now, I do not see it. Here is the log:
; //****************************************\\
; ImgBurn Version 2.5.8.0 - Log
; Thursday, 22 January 2015, 21:04:36
; \\****************************************//
;
;
I 20:56:22 ImgBurn Version 2.5.8.0 started!
I 20:56:22 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 20:56:22 Total Physical Memory: 3,144,888 KiB - Available: 1,154,476 KiB
I 20:56:22 Initialising SPTI...
I 20:56:22 Searching for SCSI / ATAPI devices...
I 20:56:22 -> Drive 1 - Info: _NEC DVD_RW ND-4570A 1.03 (M:) (ATA)
I 20:56:22 Found 1 DVD±RW/RAM!
I 21:02:19 Operation Started!
I 21:02:19 Device: [0:0:0] _NEC DVD_RW ND-4570A 1.03 (M:) (ATA)
I 21:02:19 Media Type: CD-RW (Disc ID: 97m34s25f, Mitsubishi Chemical Corp.)
I 21:02:19 Media Supported Write Speeds: 16x, 24x, 32x
I 21:02:19 Quick Erase: Yes
I 21:02:19 Erasing Disc...
I 21:02:52 Operation Successfully Completed! - Duration: 00:00:32
I 21:02:52 Operation Started!
I 21:02:52 Building Image Tree...
I 21:03:07 Checking Directory Depth...
I 21:03:07 Calculating Totals...
I 21:03:07 Preparing Image...
I 21:03:07 Checking Path Length...
I 21:03:07 Contents: 1 File, 0 Folders
I 21:03:07 Content Type: Data
I 21:03:07 Data Type: MODE1/2048
I 21:03:07 File System(s): ISO9660, UDF (1.02)
I 21:03:07 Volume Label: Relax
I 21:03:07 Size: 21,270,997 bytes
I 21:03:07 Sectors: 10,387
I 21:03:07 Image Size: 21,823,488 bytes
I 21:03:07 Image Sectors: 10,656
I 21:03:10 Operation Successfully Completed! - Duration: 00:00:18
I 21:03:10 Operation Started!
I 21:03:10 Source File: -==/\/[bUILD IMAGE]\/\==-
I 21:03:10 Source File Sectors: 10,656 (MODE1/2048)
I 21:03:10 Source File Size: 21,823,488 bytes
I 21:03:10 Source File Volume Identifier: Relax
I 21:03:10 Source File Volume Set Identifier: 4636A85A0000299C
I 21:03:10 Source File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!
I 21:03:10 Source File Implementation Identifier: ImgBurn
I 21:03:10 Source File File System(s): ISO9660, UDF (1.02)
I 21:03:10 Destination Device: [0:0:0] _NEC DVD_RW ND-4570A 1.03 (M:) (ATA)
I 21:03:10 Destination Media Type: CD-RW (Disc ID: 97m34s25f, Mitsubishi Chemical Corp.)
I 21:03:10 Destination Media Supported Write Speeds: 16x, 24x, 32x
I 21:03:10 Destination Media Sectors: 359,847
I 21:03:10 Write Mode: CD
I 21:03:10 Write Type: SAO
I 21:03:10 Write Speed: MAX
I 21:03:10 Lock Volume: Yes
I 21:03:10 Test Mode: No
I 21:03:10 OPC: No
I 21:03:10 BURN-Proof: Enabled
I 21:03:10 Write Speed Successfully Set! - Effective: 5,645 KB/s (32x)
I 21:03:10 Filling Buffer... (80 MiB)
I 21:03:11 Writing LeadIn...
I 21:03:22 Writing Session 1 of 1... (1 Track, LBA: 0 - 10655)
I 21:03:22 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 10655)
I 21:03:31 Synchronising Cache...
I 21:03:48 Exporting Graph Data...
I 21:03:48 Graph Data File: C:\Users\Hans L\AppData\Roaming\ImgBurn\Graph Data Files\_NEC_DVD_RW_ND-4570A_1.03_THURSDAY-JANUARY-22-2015_9-03_PM_97m34s25f_MAX.ibg
I 21:03:48 Export Successfully Completed!
I 21:03:48 Operation Successfully Completed! - Duration: 00:00:38
I 21:03:48 Average Write Rate: 2,664 KiB/s (15.5x) - Maximum Write Rate: 3,034 KiB/s (17.6x)
I 21:03:48 Cycling Tray before Verify...
I 21:04:06 Device Ready!
I 21:04:09 Operation Started!
I 21:04:09 Source Device: [0:0:0] _NEC DVD_RW ND-4570A 1.03 (M:) (ATA)
I 21:04:09 Source Media Type: CD-RW (Disc ID: 97m34s25f, Mitsubishi Chemical Corp.)
I 21:04:09 Source Media Supported Read Speeds: 4x, 8x, 10x, 16x, 20x, 24x, 32x, 40x
I 21:04:09 Source Media Supported Write Speeds: 16x, 24x, 32x
I 21:04:09 Source Media Sectors: 10,656
I 21:04:09 Source Media Size: 21,823,488 bytes
I 21:04:09 Image File: -==/\/[bUILD IMAGE]\/\==-
I 21:04:09 Image File Sectors: 10,656 (MODE1/2048)
I 21:04:09 Image File Size: 21,823,488 bytes
I 21:04:09 Image File Volume Identifier: Relax
I 21:04:09 Image File Volume Set Identifier: 4636A85A0000299C
I 21:04:09 Image File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!
I 21:04:09 Image File Implementation Identifier: ImgBurn
I 21:04:09 Image File File System(s): ISO9660, UDF (1.02)
I 21:04:09 Read Speed (Data/Audio): MAX / MAX
I 21:04:10 Read Speed - Effective: 40x
I 21:04:10 Verifying Session 1 of 1... (1 Track, LBA: 0 - 10655)
I 21:04:10 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 10655)
I 21:04:30 Exporting Graph Data...
I 21:04:30 Graph Data File: C:\Users\Hans L\AppData\Roaming\ImgBurn\Graph Data Files\_NEC_DVD_RW_ND-4570A_1.03_THURSDAY-JANUARY-22-2015_9-03_PM_97m34s25f_MAX.ibg
I 21:04:30 Export Successfully Completed!
I 21:04:30 Operation Successfully Completed! - Duration: 00:00:20
I 21:04:30 Average Verify Rate: 1,121 KiB/s (6.5x) - Maximum Verify Rate: 1,214 KiB/s (7.0x)
I 21:04:35 Close Request Acknowledged
I 21:04:35 Closing Down...
I 21:04:35 Shutting down SPTI...
I 21:04:35 ImgBurn closed! -
Hello:
I burned a disk (for the first time in a long time), and I can play it on my computer, but not on a regular cd player. I am sure this is easy, but I am so swamped with databaase coding work and spam-fighting galore (fighting with my host) that I must take this easy way out and ask for youf kind help.
How do I use Imgburn to create a disk that can be player on regular players.
Thank you for your help!
Hans L
-
Hello:
I have a DVD (with VIDEO_TS, AUDIO_TS, and two folders with jpg files). As a newbie, I am not sure how to create a copy of the disc with ImgBurn. Striaght copying (not with ImgBurn, of course) of files did not work, that is, the files were copied okay, but the disccould not be played on a recorder.
Grateful for some pointers.
Regards,
Hans L
-
You may need to install the AHCI driver in windows before switching over the setting in the bios.
Aha, "the" driver :-) Boy, while I am computer-literate (I built this computer), I realize how darn little I know (and how much I have learned in this thread). One final question: where do I find "the driver"?
I will also take this opportunity to thank you all -- mm, lightning, and cynthia -- for your very kind and valuable help.
Regards,
Hans L
-
In Advanced -> OnBoard Devices Configuration, I have
JMicron SATA/PATA Controller [Enabled]
...JMicron Controller Mode [iDE]
No explanation in the manual what this setting really means.
I changed "[iDE]" to "[AHCI]". and all drives were reconfigured. Burning still possible on my NEC.
I cannot change Main -> IDE Configuration ->
Configure SATA as [iDE] (other options are "RAID" and "AHCI")
to "AHCI", because, during startup, shortly after WINDOWS is first shown, a blue screen of death flickers by and reboots the computer, and the whole process starts over again. So, it has to stay IDE.
I will have to go to ASUS and ask them for some details on this.
Regards,
Hans L
-
I don't think you'll get away from the 'raid' thing if you keep the drive on the jmicron controller, that's just how it makes the drives on it look and what it emulates. So long as the drivers can handle optical drives you should be ok - and the new ones should do as I keep seeing tweaks for cdrom related stuff.
I would like to ask you, if I may, a few final questions.
How would I move the drive to another controller, and what would that controller be, and where would I find it?
------
And while this might only be slightly related, let me still ask:
I have this in Bios Setup Utility -- Main:
IDE Configuration
SATA Configuration [Enhanced]
Configure SATA as [iDE] (other options are "RAID" and "AHCI")
I am somewhat confused why one would configure SATA under "IDE Configuration". I have my internal and external hard drives on SATA -- would this setting to "[iDE]" affect those SATA connections?
Regards,
Hans L
-
Okay, I will go to the JMicron site from now on (but I think I picked up .14 from there).
In any event, I flashed firmware 1.03 (latest) for my NEC. Restarted computer, and played an audio disk!!! Progress!!!!
Then, I used ImgBurn to try to burn. Success!!!!!!!
However, as you can see below, in the log, it is still RAID. And I have one or two more questions about that, but I need to reboot and enter SETUP in order to ask. I'll be bakk!
Regards,
Hans (not from Austria, but Sweden, originally :-)
PS. Log:
I 10:11:28 ImgBurn Version 2.4.4.0 started!
I 10:11:28 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)
I 10:11:28 Total Physical Memory: 2,096,236 KB - Available: 1,152,964 KB
I 10:11:28 Initialising SPTI...
I 10:11:28 Searching for SCSI / ATAPI devices...
I 10:11:28 Found 1 DVD
-
So by the looks of it, your drive is on the JMicron controller.
Make sure you're running the latest bios for the motherboard and then install the latest JMicron driver.
http://support.asus.com/download/download.aspx?model=P5B Deluxe/WiFi-AP&os=17&SLanguage=en-us
Hello Lightning:
Thank you. Thought I had responded and said that it would be a day or two before I could update.
Now, I have updated all things ASUS motherboard. When i comes to JMicron, it is amazing how many places has different versions as the latest. The latest I found were R1.17.47.14 and R1.17.47.14_Sata. I installed ..._Sata, but I have no idea if I should have installed non-Sata instead.
I will now move connections from my borrowed wife's optical drive (no, my wife is not borrowed :-) to my NEC and install firmware 1.03, and then report back here to see what I should do next.
Regards,
Hans L
-
Just close all programs (including those in the taskbar), run the update and reboot the computer after it has finished updating. If you've set your controller to PIO mode in Device Manager then put it back on DMA if available.
If you tell us which motherboard/chipset you have (as Cynthia said above
) we could try finding out why it's in RAID mode and how to switch it back to normal IDE mode.Okay, mm, I will update after I hear back from you guys.
Regards,
Hans L
-
Ooops, I did not see your post, Cynthia, before I sent mine.
My motheroboard is ASUS P5B Deluxe WiFi-A. I'll reboot and go into Setup and get the chipset (if it is listed).
I use Belarcs -- is qtopala better?
Back soon,
Hans
Nah, did not see the name/model/designation of hte chipset, but I rebooted and entered
Bios Setup Utility -- Main
IDE Configuration
SATA Configuration [Enhanced]
Cinfigure SSATA as [iDE]
Hard drive write protect [Disabled]
IDE Detect Time Out (Sec) [35]
Regards,
Hans L
-
Do you know the model of the motherboard?
You can use this free program to find out:
Hardware -> Motherboard -> Model; will show it.
Ooops, I did not see your post, Cynthia, before I sent mine.
My motheroboard is ASUS P5B Deluxe WiFi-A. I'll reboot and go into Setup and get the chipset (if it is listed).
I use Belarcs -- is qtopala better?
Back soon,
Hans
-
Here are the sad facts :-)
While I have looked on the net, I still have no idea how/where my drive was set to RAID, how to unset it or how to set it to something else (what? where?).
I found instructions on how to update to firmware 1.03 in the read me file that accompanied the firmware from Softpedia.
Connect drive to secondary IDE channel as Master
Disconnect all slave hardware from IDE secondary Master
Use standard UDMA-2 IDE cable
Update in Windows "Safe Mode"
Under Windows 2000 & XP login as administrator
Update without DMA mode, under Windows XP & 2000 in the device manager - "IDE ATA/ ATAPI controllers", you can switch from DMA to PIO mode
Disconnect all external USB/ FireWire devices.
Deactivate virusscanners, active desktop programs and packetwriting agents
Do not turn off power during the updating process.
All understandable to me, except "Connect drive to secondary IDE channel as Master". How do I connect the drive to the secondary channel? My motherboard has only one IDE connector; however, in Device Manager/IDE ATA/ATAPI cpntrollers, there are two primary IDE channels and two secondary. Help!
I have only my one DVD drive connected to the IDE cable, and my OS is XP Home SP3.
Regards,
Hans L
PS. The Device Manager is incredible, saying that my Floppy disk drive works properly. Only problem is that I have *no* floppy drive :-)
-
Hej!
I 17:26:53 Destination Device: [4:1:0] _NEC DVD_RW ND-4570A 1.02 (H:) (RAID)Optical units normally doesn't like to be attached as RAID's. You might be able to change the setting to IDE from RAID in the BIOS or if you have another IDE connector you can connect the burner to that is using normal PATA (Non RAID).
How the hell did that happen. well, it might explain the sudden refusal to burn. Well, explain, kind'a, because I do not know how it became RAID. Any suggestion (which might help me redo it).
And I knew there was an 1.03, but when I tried to update, it refused.
Regards,
Hans L
-
Also post your Filter Driver Load Order (look in ImgBurn's Tools menu).
Hello mm:
I have attached the requested file. Hope it shows something useful.
Regards,
Hans L
-
Hi and welcome to the forum, Hans L!
Sounds as a driver issue on your computer. Any chance you can post a burn log from your computer?
Hej Cynthia!
I am attaching the ImgBurn log for my latest attempt to burn (just about half an hour ago).
Regards,
Hans Leander
-
I am aware that this is somewhat (or a lot) OT. But it concerns ImgBurn in a, for me, strange way.
Suddenly, I could not burn with my NEC ND-4570A, neither with Nero nor ImgBurn. I could play on the drive, however. So, I switched burner drives between my and my wife's computers. Here is the result:
Her computer, my drive
Nero: Not installed
Imgburn: Worked!!!
My computer, her drive
Nero: Did not work
Imgburn: Worked, although I got the following error before I pressed "Continue":
Optimum Power Calibration Failed. Reason: Power On, Reset, or Bud Device Reset Occurred.
Interesting, and to me strange, is that ImgBurn burned on her computer with my drive, but not on my computer with my drive.
When I reinstalled my drive on my computer, inserted a music disk, and double-clicked on a song, Windows MediaPlayer started opening, but then, the screen under the title bar became white and nothing happened.
I do not expect anyone to solve my problems, but I would be interested in hearing some views about why ImbBurn worked on her computer with my drive but not on my computer with my drive.
I am planning to buy a SATA drive, probably Samsung, to see if I have any better luck. Oh, the only "new" software recently installed were *updates* of Nero and *updates* of Adobe Reader and Adobe Acrobate.
Regards,
Hans L
Norton Internet Security (NIS) warns me of the Imgburn installation file
in ImgBurn Support
Posted
Hello:
I know that this is not a new issue, but why is NIS warning me about the installation file of Imgburn probably containing a Trojan? Why has Imgburn not done something to alleviate the situation? Is it childish obstinate behavior or ...?
Why is Imgburn suspected of harboring malware?
And, finally, is the installation file safe?
Best,
Hans L