[Can anybody tell me why this happened (warning error)]

Thanks for the answer.  I didn't realize that when I bought the drive....  I'll probably stay with LG from now on...

[Can anybody tell me why this happened (warning error)]

I have a new Pioneer Burner BDR-209bdk, and this following error occurs when erasing/formatting a new BD-RE disk.

(The format disk Not Supported!)

Is it needed? or is it a setting within imgburn.  

This error does not show up using LG bd burners...

 

Thx 

Mark

 

------------------------------------------------------------

 

I 18:36:16 ImgBurn Version 2.5.8.0 started!

I 18:36:16 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)

I 18:36:16 Total Physical Memory: 4,182,632 KiB  -  Available: 2,278,808 KiB

I 18:36:16 Initialising SPTI...

I 18:36:16 Searching for SCSI / ATAPI devices...

I 18:36:17 -> Drive 1 - Info: PIONEER BD-RW   BDR-209D 1.20-ID61 (D:) (ATA)

I 18:36:17 Found 1 BD-RE!

I 18:36:48 Operation Started!

I 18:36:48 Device: [2:0:0] PIONEER BD-RW   BDR-209D 1.20 (D:) (ATA)

I 18:36:48 Media Type: BD-RE (Disc ID: VERBAT-IM0-000)

I 18:36:48 Media Supported Write Speeds: 2x

I 18:36:48 Quick Erase: No

I 18:36:48 Format Properly: Yes

I 18:36:48 Format Size: Preferred

I 18:36:48 Format With Full Certification: Yes

I 18:36:48 Format Without Spare Areas: Yes

I 18:36:48 Erasing Disc...

W 18:36:48 FormatDisc(FT: 0x31, FST: 0x02) Not Supported!

W 18:36:48 FormatDisc(FT: 0x31, FST: 0x03) Not Supported!

I 18:37:11 Operation Successfully Completed! - Duration: 00:00:22

I 18:37:11 Operation Started!

I 18:37:11 Device: [2:0:0] PIONEER BD-RW   BDR-209D 1.20 (D:) (ATA)

I 18:37:11 Media Type: BD-RE (Disc ID: VERBAT-IM0-000)

I 18:37:11 Media Supported Write Speeds: 2x

I 18:37:11 Media Sectors: 12,219,392

I 18:37:11 BD-RE FastWrite: No

I 18:37:11 Zeroing Sectors...

I 19:23:57 Synchronising Cache...

I 19:23:57 Operation Successfully Completed! - Duration: 00:46:46 - Total Duration: 00:47:09

I 19:23:57 Average Write Rate: 8,709 KiB/s (2.0x)

 

-----------------------------------------------------------------------------

[failed to set l0 data zone capacity. any ideas??]

cheers fella its appreciated

 

 

Nec Optiarc 5170 does support the Playo media using firmware that is recent. (version 1.14) check this site http://www.sony-optiarc.us/en/support-serv...-ad-series.html. I checked it out using Mediacodespeededit and it shows the UME-DISK (Playo) firmware.

 

 

In addition. I found you cannot burn iso type files... best thing to do is to burn the files directly. Select the layerswitch... Then it will work.... just one of those

things with Playo Disks. (Using Imgburn). It took me about 5 failed burns to realize that the LD zone doesn't work with iso type files..... I hope this will help...

[failed to set l0 data zone capacity. any ideas??]

cheers fella its appreciated

 

 

Nec Optiarc 5170 does support the Playo media using firmware that is recent. (version 1.14) check this site http://www.sony-optiarc.us/en/support-serv...-ad-series.html. I checked it out using Mediacodespeededit and it shows the UME-DISK (Playo) firmware.

[Burning BD-R (DL)]

The software shouldn't have anything to do with it.

 

For the entire burn, the software repeats the same 'Write' command over and over again.

 

Maybe NCH uses the Incremental write type instead of DAO. Try that if you want to, it's in the Settings.

 

Either way, this is a drive/firmware/media combo issue as everything should work equally well.

 

 

With the new version that is out, do you think maybe this will fix the problem I was having? It does say something about this in the notes with the

new version???

Mark

[Burning BD-R (DL)]

I 22:17:37 Destination Media Type: BD-R (Disc ID: MEI-T01-01) (Speeds: 2x)

W 23:02:46 Failed to Write Sectors 10534816 - 10534847 - Reason: Tracking Servo Failure

The error is coming directly from your burner: it couldn't burn the media you're using. Try with Verbatim BD-R DL blanks if you can find them, or at least try with other brands (LG is crap and from what we've heard so is TDK) until you find one that works OK with your burner.

 

So if thats is the problem why did the other burner software worked without a hitch. I know that Verbatim makes good disk but they are a little bit more pricey. It seems that the other software works better on Sony disks (BD-R and BD-RE) so I'll use that. (NCH software).

[Burning BD-R (DL)]

Ok, I have tried to burn a movie which is 46.6 gig onto a Sony BD-R. Aprox half way thru the burn, it comes up with an error. (servo error, trying to write the disk aprox 20+ times and errored out). Now I know there is nothing wrong with the movie cause i tested it with a burn on a sony

BD-RE and it played fine.

 

I have changed to a different burning software and its burning it correctly so the problem is within imgburn.

 

Note: The file is an UDF 2.5 iso file which anydvd made.

 

Has any else had problems buring BD-R's from sony (DL - 50 gig)?

Is there a setting that I should use?

 

I haven't found anything on this website stating such...

 

Mark

Adding Logfile:

;

; //****************************************\\

; ImgBurn Version 2.4.4.0 - Log

; Sunday, 12 July 2009, 23:04:46

; \\****************************************//

;

;

I 22:14:58 ImgBurn Version 2.4.4.0 started!

I 22:14:58 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 22:14:58 Total Physical Memory: 1,572,336 KB - Available: 1,065,244 KB

I 22:14:58 Initialising SPTI...

I 22:14:58 Searching for SCSI / ATAPI devices...

I 22:15:05 Found 2 DVD