Jump to content

LaurieF

Members
 View Profile  See their activity

  • Posts

    12

  • Joined

  • Last visited

 Content Type 

Posts posted by LaurieF

    HELP! ImgBurn won't stop running

    in ImgBurn Support

    Posted

    HELP! More than 30 minutes ago I initiated an attempt to burn an iso image to a DVD and was asked to format it. I said yes, and the process started normally. However, within 5 minutes, it reached 11% (erasing disk) and has not budged from there since. When I try to close the program, it tells me "Sorry, you cannot cancel this operation." Further, I am unable to open the DVD tray. What should I do? Should I shut down my machine? Please help.

     

    Laurie

    ISO Burn Failure

    in ImgBurn Support

    Posted

    The suggestion in post #22 seems to be your only option. I couldn't find any later/different firmware for that drive.

     

    Option 2 if the above doesn't work is to get a nice external drive.

     

    Sometimes it works if you select another of the supported write speeds. Might also be that the quality of those cd's are not the best.

     

    (Speeds: 8x, 12x, 16x, 24x)

     

     

    Although I've tried everything except buying an external drive, no such luck! So I think I'll just give it up for now and keep my fingers crossed that I won't need the bootable recovery disk I've been trying to create for more than a week. But mucho thanks to all for your help and patience.

     

    Laurie

    ISO Burn Failure

    in ImgBurn Support

    Posted

    There are many firmwares that works on several drives in the same model series.

     

    This one seems to be one of those.

     

    apparently this 1.61 UJ-850U firmware works also on the UJ-850S

     

    Well, I gave it a shot and was told that the 1.61 UJ-850U did not apply to my device. Now what?

    ISO Burn Failure

    in ImgBurn Support

    Posted

    You have this

     

    MATSHITA DVD-RAM UJ-850S 1.50

    and the update is for that drive.

     

    Just make sure that you have no disc in the drive and all other programs closed down while you flash it.

     

    :)

     

    Yes...I know what I have currently. But my problem is that I cannot find an update specifically for UJ-850s. Yikes!

    ISO Burn Failure

    in ImgBurn Support

    Posted

    The right firmware, if there's any, should be available in the Support section of your laptop manufacturer's website.

     

     

    That's where I looked in the first place, but the only drivers listed are for:

     

    Chipset Intel

    Audio Conexant

    Bluetooth Broadcom

    Camera Bison

    Camera Logitech

    CardReader TI

    Lan Realtek

    Modem Agere

    TouchPad Synaptics

    VGA ATI

    VGA Intel

     

    Is the CD-DVD included somewhere in one of those?

     

    Laurie

    Wireless LAN Atheros Wireless LAN Driver 4.2.2.7 1.6 MB 2008/12/02

    Wireless LAN Broadcom Wireless LAN Driver 4.10.40 73.3 MB 2008/12/02

    Wireless LAN Intel Wireless LAN Driver 10.1.0.11 79.7 MB 2008/12/02

    ISO Burn Failure

    in ImgBurn Support

    Posted

    apparently this 1.61 UJ-850U firmware works also on the UJ-850S

     

    http://www.firmwarehq.com/download_355-file_EP0000144835.exe.html

     

    11c7h9l.png

     

    I'm afraid I'm too freaked out by all the warnings I get about what terrible damage I can do to my computer by "flashing the wrong driver upgrade" to feel confident with your use of the word "apparently." Is there anyway you can explain how you came to that conclusion? I'm really at the end of my rope here as it is clear that there is no upgrade for the UJ-850s...my version.

     

    Laurie

    ISO Burn Failure

    in ImgBurn Support

    Posted

    Post the whole log of that burn (previous logs can be found in ImgBurn's Help menu). As for the locking problem look in the FAQ.

     

    Presuming you're referring to "W 18:19:19 DeviceIoControl(IOCTL_CDROM_EXCLUSIVE_ACCESS, Lock, 1) Not Supported! - Reason: Incorrect function." as the locking problem, I'm having trouble finding anything about it in FAQ. What keywords do you suggest that I search?

     

    Laurie

    ISO Burn Failure

    in ImgBurn Support

    Posted

    Post the whole log of that burn (previous logs can be found in ImgBurn's Help menu). As for the locking problem look in the FAQ.

     

    Here it is. Please advise.

     

    I 18:16:14 ImgBurn Version 2.5.0.0 started!

    I 18:16:14 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3)

    I 18:16:14 Total Physical Memory: 1,038,444 KB - Available: 273,840 KB

    I 18:16:14 Initialising SPTI...

    I 18:16:14 Searching for SCSI / ATAPI devices...

    I 18:16:15 Found 1 DVD±RW/RAM and 1 Unknown!

    I 18:19:19 Operation Started!

    I 18:19:19 Source File: G:\XPPE\XP-SP3.iso

    I 18:19:19 Source File Sectors: 359,040 (MODE1/2048)

    I 18:19:19 Source File Size: 735,313,920 bytes

    I 18:19:19 Source File Volume Identifier: UBCD4Windows

    I 18:19:19 Source File Application Identifier: PEBUILDER/MKISOFS

    I 18:19:19 Source File File System(s): ISO9660 (Bootable)

    I 18:19:19 Destination Device: [0:1:0] MATSHITA DVD-RAM UJ-850S 1.50 (F:) (ATA)

    I 18:19:19 Destination Media Type: CD-R (Disc ID: 97m27s18f, Plasmon Data Systems) (Speeds: 8x, 12x, 16x, 24x)

    I 18:19:19 Destination Media Sectors: 359,847

    I 18:19:19 Write Mode: CD

    I 18:19:19 Write Type: SAO

    I 18:19:19 Write Speed: 8x

    I 18:19:19 Lock Volume: Yes

    I 18:19:19 Test Mode: No

    I 18:19:19 OPC: No

    I 18:19:19 BURN-Proof: Enabled

    W 18:19:19 DeviceIoControl(IOCTL_CDROM_EXCLUSIVE_ACCESS, Lock, 1) Not Supported! - Reason: Incorrect function.

    I 18:19:20 Filling Buffer... (61 MB)

    I 18:19:24 Writing LeadIn...

    I 18:19:51 Writing Session 1 of 1... (1 Track, LBA: 0 - 359039)

    I 18:19:51 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 359039)

    I 18:29:50 Synchronising Cache...

    I 18:30:06 Exporting Graph Data...

    I 18:30:06 Graph Data File: C:\Program Files\ImgBurn\Graphs\MATSHITA_DVD-RAM_UJ-850S_1.50_SATURDAY-JANUARY-23-2010_6-19_PM_97m27s18f_8x.ibg

    I 18:30:06 Export Successfully Completed!

    I 18:30:06 Operation Successfully Completed! - Duration: 00:10:47

    I 18:30:06 Average Write Rate: 1,198 KB/s (8.0x) - Maximum Write Rate: 1,226 KB/s (8.2x)

    I 18:30:06 Cycling Tray before Verify...

    W 18:30:28 Waiting for device to become ready...

    I 18:30:35 Device Ready!

    I 18:30:35 Operation Started!

    I 18:30:35 Source Device: [0:1:0] MATSHITA DVD-RAM UJ-850S 1.50 (F:) (ATA)

    I 18:30:35 Source Media Type: CD-R (Disc ID: 97m27s18f) (Speeds: 8x, 12x, 16x, 24x)

    I 18:30:35 Image File: G:\XPPE\XP-SP3.iso

    I 18:30:35 Image File Sectors: 359,040 (MODE1/2048)

    I 18:30:35 Image File Size: 735,313,920 bytes

    I 18:30:35 Image File Volume Identifier: UBCD4Windows

    I 18:30:35 Image File Application Identifier: PEBUILDER/MKISOFS

    I 18:30:35 Image File File System(s): ISO9660 (Bootable)

    I 18:30:35 Read Speed (Data/Audio): MAX / MAX

    E 18:30:35 Session 1, Track 1 is smaller on the disc than it is in the image file.

    E 18:30:35 Disc's Track Sectors: 0 (TOC Sectors: 0)

    E 18:30:35 Image File's Track Sectors: 359040 (TOC Sectors: 359040)

    E 18:30:35 Operation Failed! - Duration: 00:00:00

    I 18:30:35 Average Verify Rate: N/A - Maximum Verify Rate: N/A

    ISO Burn Failure

    in ImgBurn Support

    Posted

    When trying to burn an iso image to disk, in the first part of the process a single error occurred:

     

    W 18:19:19 DeviceIoControl(IOCTL_CDROM_EXCLUSIVE_ACCESS, Lock, 1) Not Supported! - Reason: Incorrect function.

     

    However, in the verify process, I quickly got this failure message:

     

    I 18:30:35 Device Ready!

    I 18:30:35 Operation Started!

    I 18:30:35 Source Device: [0:1:0] MATSHITA DVD-RAM UJ-850S 1.50 (F:) (ATA)

    I 18:30:35 Source Media Type: CD-R (Disc ID: 97m27s18f) (Speeds: 8x, 12x, 16x, 24x)

    I 18:30:35 Image File: G:\XPPE\XP-SP3.iso

    I 18:30:35 Image File Sectors: 359,040 (MODE1/2048)

    I 18:30:35 Image File Size: 735,313,920 bytes

    I 18:30:35 Image File Volume Identifier: UBCD4Windows

    I 18:30:35 Image File Application Identifier: PEBUILDER/MKISOFS

    I 18:30:35 Image File File System(s): ISO9660 (Bootable)

    I 18:30:35 Read Speed (Data/Audio): MAX / MAX

    E 18:30:35 Session 1, Track 1 is smaller on the disc than it is in the image file.

    E 18:30:35 Disc's Track Sectors: 0 (TOC Sectors: 0)

    E 18:30:35 Image File's Track Sectors: 359040 (TOC Sectors: 359040)

    E 18:30:35 Operation Failed! - Duration: 00:00:00

    I 18:30:35 Average Verify Rate: N/A - Maximum Verify Rate: N/A

     

    What did I do wrong and how do I fix it?

     

    Laurie

    I/O Error

    in ImgBurn Support

    Posted

    I 17:27:52 Destination Media Type: CD-R (Disc ID: 97m15s17f) (Speeds: 8x, 12x, 16x, 24x)

    I 17:14:05 Write Speed: MAX

     

    Try a slower write speed (Speeds: 8x, 12x, 16x, 24x) and/or try some different discs... your current ones are using a Ritek dye (97m15s17f).

     

     

    Almost made it...but no cigar! I reduced the speed to 8x and got all the way to 100% before getting a "close tray" error saying it was normal on laptops and to close the tray manually. However, when I did, I got a fail message so what do I do now?

     

    Laurie

     

    Here's the log:

     

    I 11:16:38 Average Write Rate: 1,401 KB/s (9.3x) - Maximum Write Rate: 2,101 KB/s (14.0x)

    I 11:40:15 Operation Started!

    I 11:40:15 Building Image Tree...

    I 11:40:33 Calculating Totals...

    I 11:40:33 Preparing Image...

    I 11:40:51 Contents: 7,038 Files, 103 Folders

    I 11:40:51 Content Type: Data

    I 11:40:51 File System(s): ISO9660 (Bootable), Joliet

    I 11:40:51 Volume Label: XPSETUP

    I 11:40:51 Size: 558,850,076 bytes

    I 11:40:51 Sectors: 276,610

    I 11:40:51 Image Size: 567,672,832 bytes

    I 11:40:51 Image Sectors: 277,184

    I 11:40:57 Operation Successfully Completed! - Duration: 00:00:41

    I 11:40:57 Operation Started!

    I 11:40:57 Source File: -==/\/[bUILD IMAGE]\/\==-

    I 11:40:57 Source File Sectors: 277,184 (MODE1/2048)

    I 11:40:57 Source File Size: 567,672,832 bytes

    I 11:40:57 Source File Volume Identifier: XPSETUP

    I 11:40:57 Source File Application Identifier: ImgBurn v2.4.4.0 - The Ultimate Image Burner!

    I 11:40:57 Source File Implementation Identifier: ImgBurn v2.4.4.0

    I 11:40:57 Source File File System(s): ISO9660 (Bootable), Joliet

    I 11:40:57 Destination Device: [0:1:0] MATSHITA DVD-RAM UJ-850S 1.50 (F:) (ATA)

    I 11:40:57 Destination Media Type: CD-R (Disc ID: 97m27s18f) (Speeds: 8x, 12x, 16x, 24x)

    I 11:40:57 Destination Media Sectors: 359,847

    I 11:40:57 Write Mode: CD

    I 11:40:57 Write Type: SAO

    I 11:40:57 Write Speed: 8x

    I 11:40:57 Lock Volume: Yes

    I 11:40:57 Test Mode: No

    I 11:40:57 OPC: No

    I 11:40:57 BURN-Proof: Enabled

    I 11:40:58 Filling Buffer... (40 MB)

    I 11:41:12 Writing LeadIn...

    I 11:41:38 Writing Session 1 of 1... (1 Track, LBA: 0 - 277183)

    I 11:41:38 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 277183)

    W 11:44:06 Waiting for buffers to recover... (LBA: 86368)

    W 11:44:39 Waiting for hard disk activity to reach threshold level...

    I 11:44:40 Writing Sectors...

    W 11:46:08 Waiting for buffers to recover... (LBA: 135872)

    W 11:47:09 Waiting for hard disk activity to reach threshold level...

    I 11:47:20 Writing Sectors...

    W 11:49:24 Waiting for buffers to recover... (LBA: 204416)

    W 11:50:23 Waiting for hard disk activity to reach threshold level...

    I 11:50:25 Writing Sectors...

    I 11:52:41 Synchronising Cache...

    I 11:52:57 Exporting Graph Data...

    I 11:52:57 Graph Data File: C:\Documents and Settings\LAFitz\Application Data\ImgBurn\Graph Data Files\MATSHITA_DVD-RAM_UJ-850S_1.50_SATURDAY-JULY-25-2009_11-40_AM_97m27s18f_8x.ibg

    I 11:52:57 Export Successfully Completed!

    I 11:52:57 Operation Successfully Completed! - Duration: 00:11:59

    I 11:52:57 Average Write Rate: 837 KB/s (5.6x) - Maximum Write Rate: 1,384 KB/s (9.2x)

    I 11:52:57 Cycling Tray before Verify...

    W 11:53:17 Waiting for device to become ready...

    I 11:53:31 Device Ready!

    I 11:53:32 Operation Started!

    I 11:53:32 Source Device: [0:1:0] MATSHITA DVD-RAM UJ-850S 1.50 (F:) (ATA)

    I 11:53:33 Source Media Type: CD-R (Disc ID: 97m27s18f) (Speeds: 8x, 12x, 16x, 24x)

    I 11:53:33 Image File: -==/\/[bUILD IMAGE]\/\==-

    I 11:53:33 Image File Sectors: 277,184 (MODE1/2048)

    I 11:53:33 Image File Size: 567,672,832 bytes

    I 11:53:33 Image File Volume Identifier: XPSETUP

    I 11:53:33 Image File Application Identifier: ImgBurn v2.4.4.0 - The Ultimate Image Burner!

    I 11:53:33 Image File Implementation Identifier: ImgBurn v2.4.4.0

    I 11:53:33 Image File File System(s): ISO9660 (Bootable), Joliet

    I 11:53:33 Read Speed (Data/Audio): MAX / MAX

    E 11:53:33 Session 1, Track 1 is smaller on the disc than it is in the image file.

    E 11:53:33 Disc's Track Sectors: 0 (TOC Sectors: 0)

    E 11:53:33 Image File's Track Sectors: 277184 (TOC Sectors: 277184)

    E 11:53:33 Operation Failed! - Duration: 00:00:00

    I/O Error

    in ImgBurn Support

    Posted

    Hi,

     

    I'm trying to burn a WinXP Startup disk, I get as far as 25% when I'm stopped by an I/O error. I've attached a screenshot of the error and posted my log below. Any suggestions would be appreciated. I'm flummoxed!

     

    Laurie

     

    I 15:08:20 ImgBurn Version 2.4.4.0 started!

    I 15:08:20 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3)

    I 15:08:20 Total Physical Memory: 1,038,444 KB - Available: 346,548 KB

    I 15:08:20 Initialising SPTI...

    I 15:08:20 Searching for SCSI / ATAPI devices...

    I 15:08:21 Found 1 DVD

    DVD_CD_Write_error.bmp

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept