[Joliet File System Parsing Timeout?]

Does the disc have a lot of files/folders in it? The more of them, the more time it takes to parse the filesystem.

 

Windows reports

 

Here is the disc information from ImgBurn:

 

HL-DT-ST DVDRAM GT20N CT03 (ATAPI)
Current Profile: DVD+RW

Disc Information:
Status: Complete
Erasable: Yes
Formatted: Yes
Sessions: 1
Sectors: 2,295,104
Size: 4,700,372,992 bytes
Time: 510:03:29 (MM:SS:FF)

File System Information:
Sectors: 2,254,420
Size: 4,617,052,160 bytes
Time: 501:00:70 (MM:SS:FF)

TOC Information:
Session 1... (LBA: 0)
-> Track 01  (Mode 1, LBA: 0 - 2295103)
-> LeadOut  (LBA: 2295104)

Track Information:
Session 1...
-> Track 01 (LTSA: 0, TS: 2295104, LRA: 2295103)

Physical Format Information (ADIP):
Disc ID: RITEK-004-48
Book Type: DVD+RW
Part Version: 2
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0

Physical Format Information (Last Recorded):
Disc ID: RITEK-004-48
Book Type: DVD+RW
Part Version: 2
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0

[Joliet File System Parsing Timeout?]

I keep getting this error when I'm creating an image from a disc:

 

 

The disc was burned using ImgBurn on a different computer. I have tried constantly clicking "Yes", but it ultimately comes back to that. I actually canceled the reading because I do not know if this is important. What I am trying to do is make a copy of the disc.

 

Log file:

 

I 18:44:19 ImgBurn Version 2.5.0.0 started!

I 18:44:19 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7100)

I 18:44:19 Total Physical Memory: 4,059,124 KB - Available: 2,249,960 KB

I 18:44:19 Initialising SPTI...

I 18:44:19 Searching for SCSI / ATAPI devices...

I 18:44:19 Found 1 DVD

[2.5.0.0 is really buggy for me..]

A burn log would be nice.

 

Just burned this DVD+RW:

 

I 16:25:54 ImgBurn Version 2.4.4.0 started!

I 16:25:54 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 16:25:54 Total Physical Memory: 1,046,508 KB - Available: 560,908 KB

I 16:25:54 Initialising SPTI...

I 16:25:54 Searching for SCSI / ATAPI devices...

I 16:25:54 Found 1 DVD

[2.5.0.0 is really buggy for me..]

Hello everyone.

 

I'm having major issues since I upgraded to 2.5.0.0. Here's just a summary of my problems:

 

1. Write speed only tops at 1.0x, 4.0x in 2.4.0.0.
   
2. The device buffer constantly drops and "re-buffers" during the write cycle.
   
3. Sometimes, the CD drive simply stops writing and refuses the cancel the write cycle, requiring a manual reboot.
   
4. The verify cycle only outputs errors.
   

 

This ONLY occured in 2.5.0.0. I'll post my device details soon once I get the previous version installed again. I doubt it's a device issue--why would it start after installing 2.5.0.0?

 

EDIT: Device information w/ a Maxell DVD+RW 4.7GB:

 

HL-DT-ST DVD+-RW GWA4164B E113 (ATA)
Current Profile: DVD+RW

Disc Information:
Status: Complete
Erasable: Yes
Formatted: Yes
Sessions: 1
Sectors: 2,295,104
Size: 4,700,372,992 bytes
Time: 510:03:29 (MM:SS:FF)
Supported Write Speeds: 4x

TOC Information:
Session 1... (LBA: 0)
-> Track 01  (Mode 1, LBA: 0 - 2295103)
-> LeadOut  (LBA: 2295104)

Physical Format Information (ADIP):
Disc ID: RITEK-004-48
Book Type: DVD+RW
Part Version: 2
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0

Physical Format Information (Last Recorded):
Disc ID: RITEK-004-48
Book Type: DVD+RW
Part Version: 2
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0

Format Capacities:
DT: 0x02 - NB: 2295104 (0x00230540) - TDP: 2048
FT: 0x26 - NB: 2295104 (0x00230540) - TDP: 0

Performance (Write Speed):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295103 (0x0023053F)
-> RS: 11,080 KB/s (8x) - WS: 5,540 KB/s (4x)