[ImgBurn Write Out Error]

I 17:31:42 Operation Started!
I 17:31:42 Source File: D:\Games\Halo 3_ ODST (2 DVD)[2]\alls-h3odst\alls-h3odst.dvd
I 17:31:42 Source File Sectors: 3,827,488 (MODE1/2048)
I 17:31:42 Source File Size: 7,838,695,424 bytes
I 17:31:42 Source File Volume Identifier: DVD_ROM
I 17:31:42 Source File Volume Set Identifier: 356fc000MS UDFBridge
I 17:31:42 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 17:31:42 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 17:31:42 Source File File System(s): ISO9660, UDF (1.50)
I 17:31:42 Destination Device: [0:0:0] SONY DVD RW DRU-710A BYX5 (F:) (1394)
I 17:31:42 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)
I 17:31:42 Destination Media Sectors: 4,173,824
I 17:31:42 Write Mode: DVD
I 17:31:42 Write Type: DAO
I 17:31:42 Write Speed: MAX
I 17:31:42 Link Size: Auto
I 17:31:42 Lock Volume: Yes
I 17:31:42 Test Mode: No
I 17:31:42 OPC: No
I 17:31:42 BURN-Proof: Enabled
I 17:31:42 User Specified L0 Data Zone Capacity: 1,913,760
I 17:32:44 Set L0 Data Zone Capacity Succeeded!
I 17:32:45 Filling Buffer... (40 MB)
I 17:32:45 Writing LeadIn...
I 17:32:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 17:32:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 17:32:47 Writing Layer 0... (LBA: 0 - 1913759)
I 17:44:27 Writing Layer 1... (LBA: 1913760 - 3827487)
I 17:56:16 Synchronising Cache...
I 17:56:20 Closing Track...
I 17:56:22 Finalising Disc...
W 17:57:23 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead Out
W 17:57:23 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out
W 17:57:23 Retrying (1 of 3)...
W 17:58:58 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead Out
W 17:58:58 Retry Failed - Reason: Session Fixation Error Writing Lead Out
W 17:58:58 Retrying (2 of 3)...
W 18:00:49 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead Out
W 18:00:49 Retry Failed - Reason: Session Fixation Error Writing Lead Out
W 18:00:49 Retrying (3 of 3)...
W 18:01:58 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead Out
W 18:01:58 Retry Failed - Reason: Session Fixation Error Writing Lead Out
W 18:07:32 Retrying (4)...
W 18:10:00 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead Out
W 18:10:00 Retry Failed - Reason: Session Fixation Error Writing Lead Out
I 18:11:02 Exporting Graph Data...
I 18:11:02 Graph Data File: C:\Documents and Settings\Kaspar\Application Data\ImgBurn\Graph Data Files\SONY_DVD_RW_DRU-710A_BYX5_FRIDAY-SEPTEMBER-25-2009_5-31_PM_MKM-001-00_MAX.ibg
I 18:11:02 Export Successfully Completed!
I 18:11:02 Operation Successfully Completed! - Duration: 00:39:15
I 18:11:02 Average Write Rate: 5,436 KB/s (3.9x) - Maximum Write Rate: 5,671 KB/s (4.1x)

 

 

Any idea? Was it just a coaster?

[Paying for software]

Check this link out if you want to get a refund:

 

[the same old problems... 360 backup burning write failures.... please take a look at my log]

Try burning at a different speed.

 

If that doesnt work I would recommend updating your firmware. Since its a laptop its kinda hard to find since most drives are just boxed up drives. You didnt include the first part of your log so I cant help you there. Go to your laptop manufacturer website and find firmware for your DVD burner.

 

Another reason is that either your lens is dirty(buy a cleaning disk) or you need to use high quality disks(such as verbatims!) the reason for this is because your driver might not support that dye, but practically every drive supports verbs. All in all, I would recommend getting a external burner, laptop burners are JUNK!

[How to set better buffer?]

I was burning a game and got a "waiting for buffers to recover" error. What do they do and how do I change them?

 

I would post the log but I burned on my laptop, everything burned fine I just got that error.

[What are the 2nd best alternative to verbs?]

Anyone? I just bought 20 Verbs for a good price because there was a deal on newegg. What are the 2nd best dvd dl disks?

[Verbatim DVD DL 2.4x Cheap Price!]

TOP! SALE ENDING SOON

[help with xbox 360 burn !!]

ok still having problems' changed all settings and updated dvd drive as stated.. wondering if it's my xbox firmware?? just to make sure here is a verify log on the dvd that i burned,, didn't tick verify before i burnt the disc so did it manually,, i cant find the burning log,, is this the reason?? anway here's the log

[Xbox 360 game .iso HELP]

Thats not the problem. That game is a Wave 3 game. Now, I cant discuss this on the forums but I'll give you a clue, you need to talk to the guy who flashed your xbox and ask him to update it. Another problem is that you did not prepare the game ISO right. Cant really go into details.

[What are the 2nd best alternative to verbs?]

My drive is pretty darn new. It burned my RICHOJPN disks perfectly but problem is I cant find Satik Data disk's anymore.

 

But still, there has to be a second favorite, come on guys.

[What are the 2nd best alternative to verbs?]

Okay, but as stated whats the alternative. If they didnt make verbs..what what you get.

[What are the 2nd best alternative to verbs?]

DVD Double Layer. Sorry abot that

[Verbatim DVD DL 2.4x Cheap Price!]

Check it out guys. Only 20.99 for 2.4x Verbs! To bad only one a person though =[

 

http://www.newegg.com/Product/Product.aspx...N82E16817130008

[What are the 2nd best alternative to verbs?]

What is it and where can I get it?

[Booktype Setting for Xbox 360 Games]

As long as it works why even bother?

[Cant burn some games]

Post the log.

[360 game verify gets stuck at 50%]

the game works i just cant burn it properly ive tried burning at 4x 6x and 8x none of them work still get stuck at verifying at 50%.

i tried updating firmware but it just says "your system is not configured with the tsst corp cd/dvd ts-h652l drive. no update needed.

 

i used to be able to burn games fine then none of the games i burn work im getting the 2.4x verbatims today

Why bother with verification is the game works? Either way the burn is completed. Just pop the game in your xbox and check if it works.

[360 game verify gets stuck at 50%]

Does the game work? Also it looks like your drivers minimium writing speed is 4x so select that. It also looks like your drive just stops working after it writes.

 

Try updating your firmware:

 

Firmware 0803

[Xbox360 burn failed verifying..game will not boot]

Bad news guys..i used up my very last verbatim blank, now i have none left. #39;(

However my last verbatim managed to pull it off with my updated NEC drive and the mission was a success.

Too bad i wasted my time on my quad cores drive instead of switching to my p4 drive

I've been reformating my computer so much i forgot to update the greatest thing of all..the dvd drive.

Now my beloved verbatims..you may rest peacefully.

 

Just remember folks..UPDATE your firmware before you end out of precious verbatims like moi.

Anyway thanks alot everyone ..to think i was going to try clonecd..foolish me.

 

I 21:11:31 ImgBurn Version 2.5.0.0 started!

I 21:11:31 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)

I 21:11:31 Total Physical Memory: 3,143,440 KB - Available: 1,629,156 KB

I 21:11:31 Initialising SPTI...

I 21:11:31 Searching for SCSI / ATAPI devices...

I 21:11:34 Found 1 DVD

[Help me know if something went wrong]

But, doesnt RW mean rewriteable? All my DL disks say RW on the side

[Xbox360 burn failed verifying..game will not boot]

Now since samsung sucks I cant post you the exact link but go to this site: http://samsungodd.com/eng/ and on the top go to Firmware>Firmware Download and in the search type in "SH-S183L" without the quotes.

 

Is it really okay if i change my current TS-H653L firmware to a SH-S183L firmware? What i mean is if it is safe to do so?

It's the same drive, its just different firmwares. If your current firmware doesn't do what you need it to do, whats the reason that stopping you? If you do it properly(make sure there is no media inside) everything will work fine. Just follow the instructions on the flasher.

 

Did you try updating firmware on that other drive? How did the burning go?

[Xbox360 burn failed verifying..game will not boot]

Also for the first drive you posted try updating the firmware on that also. It's a re-bagged Samsung drive.

 

Now since samsung sucks I cant post you the exact link but go to this site: http://samsungodd.com/eng/ and on the top go to Firmware>Firmware Download and in the search type in "SH-S183L" without the quotes.

 

You're slick haha! I was typing my response before you posted this.

Getting slow, old man?

Haha dam, being 16 is considered old now?

 

[Xbox360 burn failed verifying..game will not boot]

I 19:05:29 Destination Device: [0:0:0] _NEC DVD_RW ND-3540A 1.01 (J:) (USB)

There's newer firmware for that burner if you want to try (remove any disc and close the tray before updating then reboot after it's finished). Also it may be better to try burning at 4x (or 6x if it becomes available after the firmware update), after all those are 8x rated blanks.

 

Oh, and put ImgBurn 2.5.0.0 back on

You're slick haha! I was typing my response before you posted this.

 

But yeah, tell us the results afterward. Now about that other drive, as mmavles said - either clean it or get new media. That drive might of ran out of life, or the lens might be dirty. Also you may have the same issue I did. My drive wouldnt work with certain types of media. You can either get Verbs or just buy a new drive like me.

[Xbox360 burn failed verifying..game will not boot]

Destination Device: [0:0:0] _NEC DVD_RW ND-3540A 1.01 (J:) (USB)

 

You need to update your firmware on that drive, try that and try burning it again:

 

Firmware 1.04

[I got a choice of 2 Drives]

I got the Sony because seller said it was used less. Also the LG looked beat up.

 

Also, the Sony has firewire capability, so I hooked it up via firewire to my computer and I'm getting blazing speeds out of this bad boy. It also burns on my crappy blanks! I'm 14 out of 14 right now on my new 20 pack of the blanks Ive been having trouble with.

 

I would of gotten the LG but you posted the comment after I already left so I didnt see it. The LG also costs only 43 dollars new, while the Sony is in the 100 dollar range.

[I want to thank all of you]

I've been having a lot of problems lately with my blanks I purchased. You guys kept helping me out and today I finally decided to buy a new drive.

 

I bought a Sony DRX-710UL for only 25 dollars! It works perfectly with my blank disks!

 

 

Anyways, if you have a good burner and dont have enough money for verbs, look into Sonik Data disks. I've been burning all day out of a new pack of them, and so far out of 14 disks....Ive had 0 coasters and 14 successful burns(20 pack).

 

I'm really excited I finally got stuff working!