ImgBurn is reporting a format failure at 99% when doing the initial full format on BD-RE 50 GB Discs, but subseqent "Quick Format" seems to work fine (see logs). This has happened on the first two of my TDKBLD-Wfa-00 disks (now testing the third). These discs now seem to be writable but:
1) are they safe to use?
2) are there other ImgBurn setting I should have used?
3) other hints?
Thanks
Nathan
I 18:45:28 ImgBurn Version 2.5.0.0 started!
I 18:45:28 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)
I 18:45:28 Total Physical Memory: 6,281,332 KB - Available: 3,840,828 KB
W 18:45:28 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!
I 18:45:28 Initialising ElbyCDIO...
I 18:45:28 ELBYCDIO.DLL - Elaborate Bytes CDRTools - ElbyCDIO DLL - Version 6.0.9.0
I 18:45:28 Searching for SCSI / ATAPI devices...
I 18:45:28 Found 1 BD-ROM/HD DVD-ROM and 1 HD DVD-ROM/BD-RE!
I 18:45:43 Operation Started!
I 18:45:43 Device: [6:1:0] HL-DT-ST BD-RE GGW-H20L YL05 (D:) (RAID)
I 18:45:43 Media Type: BD-RE (Disc ID: TDKBLD-Wfa-00) (Speeds: 2x)
I 18:45:43 Quick Erase: No
I 18:45:43 Format Properly: Yes
I 18:45:43 Format Size: Preferred
I 18:45:43 Format With Full Certification: Yes
I 18:45:43 Format Without Spare Areas: Yes
I 18:45:43 Erasing Disc...
W 21:48:32 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/4) - Format Command Failed
E 21:48:34 Failed to Erase Disc! - Reason: Format Command Failed
E 21:48:34 Operation Failed! - Duration: 03:02:51
I 21:49:40 Operation Started!
I 21:49:40 Device: [6:1:0] HL-DT-ST BD-RE GGW-H20L YL05 (D:) (RAID)
I 21:49:40 Media Type: BD-RE (Disc ID: TDKBLD-Wfa-00) (Speeds: 2x)
I 21:49:40 Quick Erase: Yes
I 21:49:40 Erasing Disc...
I 21:49:40 Synchronising Cache...
I 21:49:40 Operation Successfully Completed! - Duration: 00:00:00
