I'm having trouble burning a Dual Layer DVD. I followed the guide on the forums, but I run into this error: Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error
I have googled this issue, and done as much trouble shooting as I can.
-Firmware
-Updated ImgBurn
-Burning at lower speed (2.4x, recommended)
-Disabling IMAPI (Windows 7 doesn't use this?)
Any help on this would be greatly appreciated! Thanks.
I 23:20:21 ImgBurn Version 2.5.0.0 started!
I 23:20:21 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)
I 23:20:21 Total Physical Memory: 4,192,760 KB - Available: 2,900,432 KB
W 23:20:21 Drive F:\ (FAT32) does not support single files > 4 GB in size.
W 23:20:21 Drive Z:\ (FAT32) might not support single files > 4 GB in size.
I 23:20:21 Initialising SPTI...
I 23:20:21 Searching for SCSI / ATAPI devices...
I 23:20:22 Found 1 DVD±RW/RAM!
I 23:20:43 Operation Started!
I 23:20:43 Building Image Tree...
I 23:20:49 Checking Directory Depth...
I 23:20:49 Calculating Totals...
I 23:20:49 Preparing Image...
W 23:20:49 File size exceeds the limit imposed by the ISO9660 file system.
W 23:20:49 Name: C:\Users\Zarko\Desktop\Borderlands\Borderlands.iso
W 23:20:49 Size: 7,838,695,424 bytes
I 23:20:49 Checking Path Length...
I 23:20:49 Contents: 2 Files, 0 Folders
I 23:20:49 Content Type: Data
I 23:20:49 Data Type: MODE1/2048
I 23:20:49 File System(s): ISO9660, UDF (1.02)
I 23:20:49 Volume Label: Borderlands
I 23:20:49 Size: 7,838,695,513 bytes
I 23:20:49 Sectors: 3,827,489
I 23:20:49 Image Size: 7,839,252,480 bytes
I 23:20:49 Image Sectors: 3,827,760
I 23:20:51 Operation Successfully Completed! - Duration: 00:00:07
I 23:20:51 Operation Started!
I 23:20:51 Source File: -==/\/[bUILD IMAGE]\/\==-
I 23:20:51 Source File Sectors: 3,827,760 (MODE1/2048)
I 23:20:51 Source File Size: 7,839,252,480 bytes
I 23:20:51 Source File Volume Identifier: Borderlands
I 23:20:51 Source File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER!
I 23:20:51 Source File Implementation Identifier: ImgBurn
I 23:20:51 Source File File System(s): ISO9660, UDF (1.02)
I 23:20:51 Destination Device: [2:1:0] LITE-ON DVDRW LH-20A1L BL06 (D:) (ATA)
I 23:20:51 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x, 8x)
I 23:20:51 Destination Media Sectors: 4,173,824
I 23:20:51 Write Mode: DVD
I 23:20:51 Write Type: DAO
I 23:20:51 Write Speed: 2.4x
I 23:20:51 Link Size: Auto
I 23:20:51 Lock Volume: Yes
I 23:20:51 Test Mode: No
I 23:20:51 OPC: No
I 23:20:51 BURN-Proof: Enabled
I 23:20:51 Book Type Setting: DVD-ROM
I 23:20:51 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 23:20:51 Optimal L0 Data Zone Capacity: 1,913,888
I 23:20:51 Optimal L0 Data Zone Method: ECC Block Boundary
E 23:21:04 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error
E 23:21:04 Operation Failed! - Duration: 00:00:12
I 23:21:04 Average Write Rate: N/A - Maximum Write Rate: N/A