dj_clubber

Hi Yeah i think the laser died. I tried burning a bluray with another programme and a error code came up and it never burnt. What i dont get is that i can read a bluray with it but it not writing. Its under warranty think so will see if i can get a replacement. I got it off ebay from korea so wish me luck lol. Andrew.

I 20:35:38 ImgBurn Version 2.5.0.0 started! I 20:35:38 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 20:35:38 Total Physical Memory: 3,144,184 KB - Available: 2,207,856 KB W 20:35:38 SPTD can have a detrimental effect on drive performance. I 20:35:38 Initialising SPTI... I 20:35:38 Searching for SCSI / ATAPI devices... I 20:35:39 Found 2 DVD±RW/RAMs, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 20:35:48 Operation Started! I 20:35:48 Building Image Tree... I 20:35:49 Calculating Totals... I 20:35:49 Preparing Image... I 20:35:49 Contents: 1,744 Files, 22 Folders I 20:35:49 Content Type: Data I 20:35:49 Data Type: MODE1/2048 I 20:35:49 File System(s): UDF (1.02) I 20:35:49 Volume Label: [Not Configured] I 20:35:49 Size: 39,260,025,919 bytes I 20:35:49 Sectors: 19,170,922 I 20:35:49 Image Size: 39,266,353,152 bytes I 20:35:49 Image Sectors: 19,173,024 I 20:35:49 Operation Successfully Completed! - Duration: 00:00:00 I 20:36:24 Operation Started! I 20:36:24 Building Image Tree... I 20:36:26 Calculating Totals... I 20:36:26 Preparing Image... I 20:36:26 Contents: 1,744 Files, 22 Folders I 20:36:26 Content Type: Data I 20:36:26 Data Type: MODE1/2048 I 20:36:26 File System(s): UDF (1.02) I 20:36:26 Volume Label: Snatch_(2000) I 20:36:26 Size: 39,260,025,919 bytes I 20:36:26 Sectors: 19,170,922 I 20:36:26 Image Size: 39,266,353,152 bytes I 20:36:26 Image Sectors: 19,173,024 I 20:36:30 Operation Successfully Completed! - Duration: 00:00:05 I 20:36:30 Operation Started! I 20:36:30 Source File: -==/\/[bUILD IMAGE]\/\==- I 20:36:30 Source File Sectors: 19,173,024 (MODE1/2048) I 20:36:30 Source File Size: 39,266,353,152 bytes I 20:36:30 Source File Volume Identifier: Snatch_(2000) I 20:36:30 Source File Application Identifier: ImgBurn v2.5.0.0 I 20:36:30 Source File Implementation Identifier: ImgBurn I 20:36:30 Source File File System(s): UDF (1.02) I 20:36:30 Destination Device: [1:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (I:) (ATA) I 20:36:30 Destination Media Type: BD-R (Disc ID: VERBAT-IMb-00) (Speeds: 2x, 4x) I 20:36:30 Destination Media Sectors: 24,438,784 I 20:36:30 Write Mode: BD I 20:36:30 Write Type: DAO I 20:36:30 Write Speed: MAX I 20:36:30 BD-R Verify Not Required: Yes I 20:36:30 Link Size: Auto I 20:36:30 Lock Volume: Yes I 20:36:30 Test Mode: No I 20:36:30 OPC: No I 20:36:30 BURN-Proof: Enabled I 20:36:52 Filling Buffer... (40 MB) I 20:36:53 Writing LeadIn... W 20:37:07 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error W 20:37:07 Retrying (1 of 20)... W 20:37:22 Retry Failed - Reason: Power Calibration Area Error W 20:37:22 Retrying (2 of 20)... W 20:37:36 Retry Failed - Reason: Power Calibration Area Error W 20:37:36 Retrying (3 of 20)... W 20:37:50 Retry Failed - Reason: Power Calibration Area Error W 20:37:50 Retrying (4 of 20)... Tried upgrading firmware done, tried writing at 2x but cant find IMAPI in win 7? Any ideas?

What about the power problem when trying to burn a disc?

I 19:26:47 ImgBurn Version 2.5.0.0 started! I 19:26:47 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 19:26:47 Total Physical Memory: 3,144,184 KB - Available: 2,177,592 KB W 19:26:47 SPTD can have a detrimental effect on drive performance. I 19:26:47 Initialising SPTI... I 19:26:47 Searching for SCSI / ATAPI devices... I 19:26:48 Found 2 DVD±RW/RAMs, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 19:32:35 Operation Started! I 19:32:35 Building Image Tree... I 19:32:36 Calculating Totals... I 19:32:36 Preparing Image... I 19:32:36 Contents: 1,744 Files, 22 Folders I 19:32:36 Content Type: Data I 19:32:36 Data Type: MODE1/2048 I 19:32:36 File System(s): UDF (1.02) I 19:32:36 Volume Label: [Not Configured] I 19:32:36 Size: 39,260,025,919 bytes I 19:32:36 Sectors: 19,170,922 I 19:32:36 Image Size: 39,266,353,152 bytes I 19:32:36 Image Sectors: 19,173,024 I 19:32:36 Operation Successfully Completed! - Duration: 00:00:00 I 19:32:39 Operation Started! I 19:32:39 Building Image Tree... I 19:32:40 Calculating Totals... I 19:32:40 Preparing Image... I 19:32:41 Contents: 1,744 Files, 22 Folders I 19:32:41 Content Type: Data I 19:32:41 Data Type: MODE1/2048 I 19:32:41 File System(s): UDF (1.02) I 19:32:41 Volume Label: Snatch_(2000) I 19:32:41 Size: 39,260,025,919 bytes I 19:32:41 Sectors: 19,170,922 I 19:32:41 Image Size: 39,266,353,152 bytes I 19:32:41 Image Sectors: 19,173,024 I 19:32:42 Operation Successfully Completed! - Duration: 00:00:03 I 19:32:42 Operation Started! I 19:32:42 Source File: -==/\/[bUILD IMAGE]\/\==- I 19:32:42 Source File Sectors: 19,173,024 (MODE1/2048) I 19:32:42 Source File Size: 39,266,353,152 bytes I 19:32:42 Source File Volume Identifier: Snatch_(2000) I 19:32:42 Source File Application Identifier: ImgBurn v2.5.0.0 I 19:32:42 Source File Implementation Identifier: ImgBurn I 19:32:42 Source File File System(s): UDF (1.02) I 19:32:42 Destination Device: [1:0:0] HL-DT-ST BD-RE BH08LS20 1.00 (I:) (ATA) I 19:32:42 Destination Media Type: BD-R (Disc ID: VERBAT-IMb-00) (Speeds: 2x, 4x) I 19:32:42 Destination Media Sectors: 24,438,784 I 19:32:42 Write Mode: BD I 19:32:42 Write Type: DAO I 19:32:42 Write Speed: MAX I 19:32:42 BD-R Verify Not Required: Yes I 19:32:42 Link Size: Auto I 19:32:42 Lock Volume: Yes I 19:32:42 Test Mode: No I 19:32:42 OPC: No I 19:32:42 BURN-Proof: Enabled I 19:33:04 Filling Buffer... (40 MB) I 19:33:15 Writing LeadIn... W 19:33:29 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error W 19:33:29 Retrying (1 of 20)... W 19:33:44 Retry Failed - Reason: Power Calibration Area Error W 19:33:44 Retrying (2 of 20)... Im trying to burn a disc but it keeps timing out and saying something about power calibration. Any ideas. I tried 2 brands of disc and same problem.

I need some help with this problem. W 18:02:03 SPTD can have a detrimental effect on drive performance. This error keeps popping up also i get an error when trying to burn d disc saying power calibration error erea. Any help here? Andrew.