Hello and good evening
so i bought verbatim media with a burnspeed of 8x.
This is where my problems started, i used to burn xbox backups no problem with the old 2.4x ones
but the only store close by that sells these only have 8x now.
well any way, at first i tried to burn a backup, and failed right off the bat, destroying the media.
i did some reading and tried burning at 8x speed, it burned the first layer and then failed again.
i did MORE reading and realized i need to update my driver's firmware, so i did just that.
what happens now, is the burn proccess goes smoothly all the way trough, both layers burn without a problem, but then when its finalising the disk.....
I 21:52:50 ImgBurn Version 2.5.0.0 started!
I 21:52:50 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 21:52:50 Total Physical Memory: 1,047,856 KB - Available: 689,700 KB
W 21:52:50 SPTD can have a detrimental effect on drive performance.
I 21:52:50 Initialising SPTI...
I 21:52:50 Searching for SCSI / ATAPI devices...
I 21:52:50 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!
I 21:54:16 Operation Started!
I 21:54:16 Source File: H:\Assassins.Creed.II.PAL.XBOX360-DNL\IMAGE.dvd
I 21:54:16 Source File Sectors: 3,827,488 (MODE1/2048)
I 21:54:16 Source File Size: 7,838,695,424 bytes
I 21:54:16 Source File Volume Identifier: DVD_ROM
I 21:54:16 Source File Volume Set Identifier: fd244000MS UDFBridge
I 21:54:16 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 21:54:16 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 21:54:16 Source File File System(s): ISO9660, UDF (1.50)
I 21:54:16 Destination Device: [1:0:0] Optiarc DVD RW AD-7170A 1.05 (I:) (ATA)
I 21:54:16 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 21:54:16 Destination Media Sectors: 4,173,824
I 21:54:16 Write Mode: DVD
I 21:54:16 Write Type: DAO
I 21:54:16 Write Speed: 2.4x
I 21:54:16 Link Size: Auto
I 21:54:16 Lock Volume: Yes
I 21:54:16 Test Mode: No
I 21:54:16 OPC: No
I 21:54:16 BURN-Proof: Enabled
I 21:54:16 Book Type Setting: DVD-ROM
I 21:54:17 User Specified L0 Data Zone Capacity: 1,913,760
I 21:54:53 Set L0 Data Zone Capacity Succeeded!
I 21:54:54 Filling Buffer... (40 MB)
I 21:54:55 Writing LeadIn...
I 21:54:56 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 21:54:56 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 21:54:56 Writing Layer 0... (LBA: 0 - 1913759)
I 22:14:38 Writing Layer 1... (LBA: 1913760 - 3827487)
I 22:34:34 Synchronising Cache...
I 22:34:35 Closing Track...
I 22:35:07 Finalising Disc...
W 22:35:38 Potential 'WaitImmediateIO' Deferred Error - (51%, 0/3) - No Seek Complete
W 22:35:38 Finalise Disc Failed! - Reason: No Seek Complete
W 22:35:38 Retrying (1 of 3)...
W 22:36:05 Potential 'WaitImmediateIO' Deferred Error - (45%, 0/3) - No Seek Complete
W 22:36:05 Retrying (2 of 3)...
W 22:36:38 Potential 'WaitImmediateIO' Deferred Error - (57%, 0/3) - No Seek Complete
W 22:36:38 Retry Failed - Reason: No Seek Complete
W 22:36:38 Retrying (3 of 3)...
W 22:37:08 Potential 'WaitImmediateIO' Deferred Error - (49%, 0/3) - No Seek Complete
W 22:37:08 Retry Failed - Reason: No Seek Complete
W 23:20:15 Retrying (4)...
W 23:20:42 Potential 'WaitImmediateIO' Deferred Error - (45%, 0/3) - No Seek Complete
W 23:20:42 Retry Failed - Reason: No Seek Complete
W 23:20:48 Retrying (5)...
W 23:21:24 Potential 'WaitImmediateIO' Deferred Error - (61%, 0/3) - No Seek Complete
W 23:21:24 Retry Failed - Reason: No Seek Complete
W 23:21:26 Retrying (6)...
W 23:21:57 Potential 'WaitImmediateIO' Deferred Error - (52%, 0/3) - No Seek Complete
W 23:21:57 Retry Failed - Reason: No Seek Complete
W 23:22:03 Retrying (7)...
W 23:22:34 Potential 'WaitImmediateIO' Deferred Error - (52%, 0/3) - No Seek Complete
W 23:22:34 Retry Failed - Reason: No Seek Complete
W 23:22:39 Retrying (8)...
W 23:23:08 Potential 'WaitImmediateIO' Deferred Error - (49%, 0/3) - No Seek Complete
W 23:23:08 Retry Failed - Reason: No Seek Complete
W 23:26:57 Retrying (9)...
im really out of ideas. help would be appreciated