PaPaSmUrF

it says I/O Error! Device:[0:10] HL-DT-ST BDDVDRW CT10L YC07 (E:0) (ATAPI) ScsiStatus 0X02 Interpretation:Check Condition CDB: 2A 00 00 00 00 20 00 00 20 00 Interpretation: Write (10) - Sectors: 32-63 Sense Area: 71 00 03 00 00 00 00 0A 35 2D 03 3E 0C 00 00 00 00 00 Interpretation: Write Error Is what it says I 23:27:20 ImgBurn Version 2.5.1.0 started! I 23:27:20 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 23:27:20 Total Physical Memory: 4,160,712 KB - Available: 2,277,620 KB I 23:27:20 Initialising SPTI... I 23:27:20 Searching for SCSI / ATAPI devices... I 23:27:20 -> Drive 1 - Info: HL-DT-ST BDDVDRW CT10L YC07 (E:) (ATAPI) I 23:27:20 Found 1 BD-ROM/DVD±RW! I 23:27:55 Operation Started! I 23:27:55 Source File: C:\Users\test\Desktop\Red.Dead.Redemption.XBOX360.RF-TL\rdr.dvd I 23:27:55 Source File Sectors: 3,827,488 (MODE1/2048) I 23:27:55 Source File Size: 7,838,695,424 bytes I 23:27:55 Source File File System(s): None I 23:27:55 Destination Device: [0:1:0] HL-DT-ST BDDVDRW CT10L YC07 (E:) (ATAPI) I 23:27:55 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x) I 23:27:55 Destination Media Sectors: 3,827,520 I 23:27:55 Write Mode: DVD I 23:27:55 Write Type: DAO I 23:27:55 Write Speed: 2.4x I 23:27:55 Link Size: Auto I 23:27:55 Lock Volume: Yes I 23:27:55 Test Mode: No I 23:27:55 OPC: No I 23:27:55 BURN-Proof: Enabled I 23:27:55 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 23:27:55 Book Type Setting: N/A I 23:27:55 User Specified L0 Data Zone Capacity: 1,913,760 I 23:27:55 Set L0 Data Zone Capacity Succeeded! I 23:27:55 Filling Buffer... (40 MB) I 23:27:56 Writing LeadIn... W 23:27:56 Failed to Write Sectors 32 - 63 - Reason: Write Error W 23:27:56 Retrying (1 of 20)... W 23:27:56 Retry Failed - Reason: Invalid Address For Write W 23:27:56 Retrying (2 of 20)... W 23:27:56 Retry Failed - Reason: Invalid Address For Write W 23:27:56 Retrying (3 of 20)... W 23:27:56 Retry Failed - Reason: Invalid Address For Write W 23:27:56 Retrying (4 of 20)... W 23:27:56 Retry Failed - Reason: Invalid Address For Write W 23:27:56 Retrying (5 of 20)... W 23:27:56 Retry Failed - Reason: Invalid Address For Write W 23:27:56 Retrying (6 of 20)... W 23:27:56 Retry Failed - Reason: Invalid Address For Write W 23:27:56 Retrying (7 of 20)... W 23:27:56 Retry Failed - Reason: Invalid Address For Write W 23:27:56 Retrying (8 of 20)... W 23:27:56 Retry Failed - Reason: Invalid Address For Write W 23:27:56 Retrying (9 of 20)... W 23:27:56 Retry Failed - Reason: Invalid Address For Write W 23:27:56 Retrying (10 of 20)... W 23:27:56 Retry Failed - Reason: Invalid Address For Write W 23:27:56 Retrying (11 of 20)... W 23:27:57 Retry Failed - Reason: Invalid Address For Write W 23:27:57 Retrying (12 of 20)... W 23:27:57 Retry Failed - Reason: Invalid Address For Write W 23:27:57 Retrying (13 of 20)... W 23:27:57 Retry Failed - Reason: Invalid Address For Write W 23:27:57 Retrying (14 of 20)... W 23:27:57 Retry Failed - Reason: Invalid Address For Write W 23:27:57 Retrying (15 of 20)... W 23:27:57 Retry Failed - Reason: Invalid Address For Write W 23:27:57 Retrying (16 of 20)... W 23:27:57 Retry Failed - Reason: Invalid Address For Write W 23:27:57 Retrying (17 of 20)... W 23:27:57 Retry Failed - Reason: Invalid Address For Write W 23:27:57 Retrying (18 of 20)... W 23:27:57 Retry Failed - Reason: Invalid Address For Write W 23:27:57 Retrying (19 of 20)... W 23:27:57 Retry Failed - Reason: Invalid Address For Write W 23:27:57 Retrying (20 of 20)... W 23:27:57 Retry Failed - Reason: Invalid Address For Write E 23:28:00 Failed to Write Sectors 32 - 63 - Reason: Write Error E 23:28:00 Next Writable Address: 0 I 23:28:00 Synchronising Cache... W 23:28:02 User opted to skip the 'Close Track/Session/Disc' functions. E 23:28:02 Failed to Write Image! E 23:28:03 Operation Failed! - Duration: 00:00:07 I 23:28:03 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)

Thx m8 fixed the problem Edit: at first glance it was fixed, but still getting the same error All of my drivers appear to be up to date but the problem is still happening

Thx m8 fixed the problem Edit: at first glance it was fixed but near the end of burns it still fails for some reason.With the same error type.

Not sure what drive i have, i have an hp hdx 18 lappy im burning on \/\/\/\/\/\/ Logs \/\/\/\/\/\/\/\/\/\/\/ I 15:50:25 ImgBurn Version 2.5.1.0 started! I 15:50:25 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 15:50:25 Total Physical Memory: 4,160,712 KB - Available: 2,290,988 KB W 15:50:25 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 15:50:25 Initialising SPTI... I 15:50:25 Searching for SCSI / ATAPI devices... I 15:50:25 -> Drive 1 - Info: HL-DT-ST BDDVDRW CT10L YC07 (E:) (ATAPI) I 15:50:25 -> Drive 2 - Info: CVQHCTA 8DQ7CTYFKXQ 3.5Z (F:) (SCSI) I 15:50:25 Found 1 BD-ROM/HD DVD-ROM and 1 BD-ROM/DVD±RW! I 15:50:50 Operation Started! I 15:50:50 Source File: C:\Users\test\Desktop\HHH\SCConviction.dvd I 15:50:50 Source File Sectors: 3,827,488 (MODE1/2048) I 15:50:50 Source File Size: 7,838,695,424 bytes I 15:50:50 Source File Volume Identifier: DVD_ROM I 15:50:50 Source File Volume Set Identifier: ec67c000MS UDFBridge I 15:50:50 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 15:50:50 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 15:50:50 Source File File System(s): ISO9660, UDF (1.50) I 15:50:50 Destination Device: [0:1:0] HL-DT-ST BDDVDRW CT10L YC07 (E:) (ATAPI) I 15:50:50 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x) I 15:50:50 Destination Media Sectors: 4,173,824 I 15:50:50 Write Mode: DVD I 15:50:50 Write Type: DAO I 15:50:50 Write Speed: 2.4x I 15:50:50 Link Size: Auto I 15:50:50 Lock Volume: Yes I 15:50:50 Test Mode: No I 15:50:50 OPC: No I 15:50:50 BURN-Proof: Enabled I 15:50:50 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 15:50:50 Book Type Setting: N/A I 15:50:50 User Specified L0 Data Zone Capacity: 1,913,760