[ImgBurn v2.5.1.0 verify error]

I don't know what I'm looking for, but here's the Filter Driver Load Order - ImgBurn v2.5.1.0

 

Upper Device Filter: [None Found]

 

Upper Class Filter: GEARAspiWDM

Filter Name: GEARAspiWDM

File Name: C:\Windows\system32\DRIVERS\GEARAspiWDM.sys

File Version: 2.02.00.01 [2.2.0.1]

File Description: CD DVD Filter

Product Name: CD DVD Filter

Product Version: 2.02.00.01 [2.2.0.1]

Company Name: GEAR Software Inc.

Copyright: Copyright © GEAR Software Inc. 1997-2009

 

Device: CD/DVD-ROM Device

 

Lower Class Filter: PxHelp20

Filter Name: PxHelp20

File Name: C:\Windows\System32\Drivers\PxHelp20.sys

File Version: 3.00.78a [3.0.78.0]

File Description: Px Engine Device Driver for Windows 2000/XP

Product Name: PxHelp20

Product Version: [2.0.0.0]

Company Name: Sonic Solutions

Copyright: Copyright © Sonic Solutions

 

Lower Device Filter: [None Found]

 

Does this tell you anything? The drivers for the DVD and hard drive are up-to-date.

What happens if I remove the Upper and Lower Filters?

[ImgBurn v2.5.1.0 verify error]

The logs were deleted during the uninstall. What filters are you talking about?

[ImgBurn v2.5.1.0 verify error]

I installed ImgBurn v2.5.1.0 on Windows7 Ultimate and tried to burn Memorex DVD+R and DVD+R DL discs but would receive an error while in verify mode. No, I do not have the burn log for you to look at and I can't afford to waste another disc. My Memorex discs are 3+ years old and the burner is a 2 year old Lite-On 20x LH-20A1L. I know you prefer Verbatim discs but please read on.

 

After losing 3 DVD+R DLs trying to burn the same file, I searched the web and discovered that more than likely the drive was the culprit because ImgBurn v2.5.1.0 can not cause this problem. Instead of replacing the drive, checking cables, upgrading firmware, or changing discs, I decided to uninstall ImgBurn v2.5.1.0 and install ImgBurn 2.3.0.0 and it worked! I used the same 3+ year old discs and the same file for the burn. None of the settings in ImgBurn were changed. It burned and verified without a problem. I used that burned disc and installed the software to the hard drive, ran the program and everything works great.

 

How can my DVD drive or old discs be bad if this worked? Isn't there a possibility that maybe there's something going on with ImgBurn v2.5.1.0 that causes a burn error?