Twilightning

Lately my laptop DVD writer is a real pain in the ass when it comes to writing DL DVD's. Usually it started to burn after a few attempts, but now I'm lucky if I manage to burn something within a few hours, so I decided to give an external DVD-writer a try. Unfortunately I get another error now. Any thoughts on the problem and / or solution? For the record: I'm using Verbatim DVD+R DL discs and I tried about all speeds I have the latest version of IMGburn and the latest FW for my DVD-Writer I 15:04:07 ImgBurn Version 2.5.2.0 started! I 15:04:07 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 15:04:07 Total Physical Memory: 3.144.120 KB - Available: 1.545.328 KB I 15:04:07 Initialising SPTI... I 15:04:07 Searching for SCSI / ATAPI devices... I 15:04:07 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-T20N WP03 (D:) (ATA) I 15:04:07 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (G:) (Unknown) I 15:04:07 -> Drive 3 - Info: TSSTcorp CDDVDW SE-S204S TS02 (E:) (USB) I 15:04:07 Found 1 DVD-ROM and 2 DVD±RW/RAMs! I 15:04:55 Operation Started! I 15:04:55 Source File: C:\Users\Roy\Desktop\Xbox360\Assassins.Creed.Brotherhood.XBOX360-GLoBAL\acb360.dvd I 15:04:55 Source File Sectors: 3.827.488 (MODE1/2048) I 15:04:55 Source File Size: 7.838.695.424 bytes I 15:04:55 Source File Volume Identifier: DVD_ROM I 15:04:55 Source File Volume Set Identifier: 1b018000MS UDFBridge I 15:04:55 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 15:04:55 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 15:04:55 Source File File System(s): ISO9660; UDF (1.50) I 15:04:55 Destination Device: [0:0:0] TSSTcorp CDDVDW SE-S204S TS02 (E:) (USB) I 15:04:55 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x; 10x) I 15:04:55 Destination Media Sectors: 3.827.520 I 15:04:55 Write Mode: DVD I 15:04:55 Write Type: DAO I 15:04:55 Write Speed: 4x I 15:04:55 Link Size: Auto I 15:04:55 Lock Volume: Yes I 15:04:55 Test Mode: No I 15:04:55 OPC: No I 15:04:55 BURN-Proof: Enabled I 15:04:55 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x) I 15:04:55 Book Type Setting: DVD-ROM I 15:04:55 User Specified L0 Data Zone Capacity: 1.913.760 I 15:04:55 Set L0 Data Zone Capacity Succeeded! I 15:04:56 Filling Buffer... (40 MB) I 15:04:58 Writing LeadIn... W 15:04:58 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error W 15:04:58 Retrying (1 of 20)... W 15:04:59 Retry Failed - Reason: Power Calibration Area Error W 15:04:59 Retrying (2 of 20)... W 15:04:59 Retry Failed - Reason: Power Calibration Area Error W 15:04:59 Retrying (3 of 20)... W 15:04:59 Retry Failed - Reason: Power Calibration Area Error W 15:04:59 Retrying (4 of 20)... W 15:04:59 Retry Failed - Reason: Power Calibration Area Error W 15:04:59 Retrying (5 of 20)... W 15:04:59 Retry Failed - Reason: Power Calibration Area Error W 15:04:59 Retrying (6 of 20)... W 15:05:00 Retry Failed - Reason: Power Calibration Area Error W 15:05:00 Retrying (7 of 20)... W 15:05:00 Retry Failed - Reason: Power Calibration Area Error W 15:05:00 Retrying (8 of 20)... W 15:05:00 Retry Failed - Reason: Power Calibration Area Error W 15:05:00 Retrying (9 of 20)... W 15:05:00 Retry Failed - Reason: Power Calibration Area Error W 15:05:00 Retrying (10 of 20)... W 15:05:00 Retry Failed - Reason: Power Calibration Area Error W 15:05:00 Retrying (11 of 20)... W 15:05:00 Retry Failed - Reason: Power Calibration Area Error W 15:05:00 Retrying (12 of 20)... W 15:05:01 Retry Failed - Reason: Power Calibration Area Error W 15:05:01 Retrying (13 of 20)... W 15:05:01 Retry Failed - Reason: Power Calibration Area Error W 15:05:01 Retrying (14 of 20)... W 15:05:01 Retry Failed - Reason: Power Calibration Area Error W 15:05:01 Retrying (15 of 20)... W 15:05:01 Retry Failed - Reason: Power Calibration Area Error W 15:05:01 Retrying (16 of 20)... W 15:05:01 Retry Failed - Reason: Power Calibration Area Error W 15:05:01 Retrying (17 of 20)... W 15:05:02 Retry Failed - Reason: Power Calibration Area Error W 15:05:02 Retrying (18 of 20)... W 15:05:02 Retry Failed - Reason: Power Calibration Area Error W 15:05:02 Retrying (19 of 20)... W 15:05:02 Retry Failed - Reason: Power Calibration Area Error W 15:05:02 Retrying (20 of 20)... W 15:05:02 Retry Failed - Reason: Power Calibration Area Error E 15:05:05 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error I 15:05:05 Synchronising Cache... W 15:05:12 User opted to skip the 'Close Track/Session/Disc' functions. E 15:05:12 Failed to Write Image! E 15:05:12 Operation Failed! - Duration: 00:00:16 I 15:05:12 Average Write Rate: N/A - Maximum Write Rate: N/A

Hey Guys, I'm having the same problem alot of people have posted about, but I just wanna see if there's a solution, cause I used to be able to burn discs, but now it just refuses. Recenlty I went from Vista to Windows 7 (+ the latest version of IMGburn) And now it won't allow me to burn Xbox360 games anymore. Before I always got messages like: "Failed to set L0 data zone capacity" and errors like: Now before it was a pain in the ass to burn a game, because I had to try a 100 times with a 100 different speeds, change between empty discs and then it finally let me burn a disc, but now I'm just stuck with the same error. I've been trying the whole afternoon. Here's the log: I 15:32:26 ImgBurn Version 2.5.2.0 started! I 15:32:26 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 15:32:26 Total Physical Memory: 3.144.120 KB - Available: 1.697.520 KB I 15:32:26 Initialising SPTI... I 15:32:26 Searching for SCSI / ATAPI devices... I 15:32:26 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-T20N WP03 (D:) (ATA) I 15:32:26 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (G:) (Unknown) I 15:32:26 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 15:34:43 Operation Started! I 15:34:43 Source File: F:\Downloads\MAFiA.2.2010.PAL.XBOX360-ELiTE\MAFiA.2.2010.PAL.XBOX360-ELiTE.dvd I 15:34:43 Source File Sectors: 3.827.488 (MODE1/2048) I 15:34:43 Source File Size: 7.838.695.424 bytes I 15:34:43 Source File Volume Identifier: DVD_ROM I 15:34:43 Source File Volume Set Identifier: ec67c000MS UDFBridge I 15:34:43 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 15:34:43 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 15:34:43 Source File File System(s): ISO9660; UDF (1.50) I 15:34:43 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-T20N WP03 (D:) (ATA) I 15:34:43 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x) I 15:34:43 Destination Media Sectors: 3.827.520 I 15:34:43 Write Mode: DVD I 15:34:43 Write Type: DAO I 15:34:43 Write Speed: MAX I 15:34:43 Link Size: Auto I 15:34:43 Lock Volume: Yes I 15:34:43 Test Mode: No I 15:34:43 OPC: No I 15:34:43 BURN-Proof: Enabled W 15:34:43 Write Speed Miscompare! - MODE SENSE: 8.310 KB/s (6x), GET PERFORMANCE: 3.324 KB/s (2,4x) I 15:34:43 Write Speed Successfully Set! - Effective: 3.324 KB/s (2,4x) I 15:34:43 Book Type Setting: N/A I 15:34:43 Optimal L0 Data Zone Capacity: 1.913.760 I 15:34:43 Optimal L0 Data Zone Method: Copied From Original Disc I 15:34:43 Set L0 Data Zone Capacity Succeeded! I 15:34:44 Filling Buffer... (40 MB) I 15:34:45 Writing LeadIn... W 15:35:03 Failed to Write Sectors 544 - 575 - Reason: Write Error W 15:35:03 Retrying (1 of 20)... W 15:35:03 Retry Failed - Reason: Write Error W 15:35:03 Retrying (2 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (3 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (4 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (5 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (6 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (7 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (8 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (9 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (10 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (11 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (12 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (13 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (14 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (15 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (16 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (17 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (18 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (19 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write W 15:35:03 Retrying (20 of 20)... W 15:35:03 Retry Failed - Reason: Invalid Address For Write E 15:40:42 Failed to Write Sectors 544 - 575 - Reason: Write Error E 15:40:42 Next Writable Address: 0 I 15:40:42 Synchronising Cache... W 15:40:47 User opted to skip the 'Close Track/Session/Disc' functions. E 15:40:47 Failed to Write Image! E 15:40:47 Operation Failed! - Duration: 00:06:04 I 15:40:47 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) And just to be clear, I'm using Verbatim DVD+ DL discs and I use to be able to burn these disc (with some trouble)