Max33277

Try a higher speed (all), you are using 8x rated media after all... Always enable verify, that will tell you if the burn was good or not. Hi, thanks for your hint, but it doesn't work. I tried 6x and 8x write speed with the same error message. M.

Hi, thanks for your hint, but it doesn't work. I tried write speed 6x and 8x with the same error message. M.

Hello, I always get the following error "Set L0 Data Zone Capacity Failed! - Reason: No Additional Sense Information " with my new DVD-Burner from LG. I use Verbatim 8x DVD+R DL and i made an update with the newest firmware 2.0 for the LG Burner. I tried another write speed with 4x, but the same error came. When the error message comes, i choosed "weiter (next)". The writing process was successful, but i don't know,that the burned DVD is ok. Here's my new log: /****************************************\\ ; ImgBurn Version 2.5.2.0 - Log ; Dienstag, 16 November 2010, 18:23:19 ; \\****************************************// ; ; I 16:47:46 ImgBurn Version 2.5.2.0 started! I 16:47:46 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 16:47:46 Total Physical Memory: 3.141.664 KB - Available: 1.693.164 KB W 16:47:46 Drive J:\ (FAT32) does not support single files > 4 GB in size. W 16:47:46 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 16:47:46 Initialising SPTI... I 16:47:46 Searching for SCSI / ATAPI devices... I 16:47:46 -> Drive 1 - Info: Slimtype BD E DS4E1S EA12 (F:) (ATAPI) I 16:47:46 -> Drive 2 - Info: Generic DVDROM (E:) (SCSI) I 16:47:46 -> Drive 3 - Info: Generic DVDROM (G:) (SCSI) I 16:47:46 -> Drive 4 - Info: Generic DVDROM (H:) (SCSI) I 16:47:46 -> Drive 5 - Info: Generic DVDROM (L:) (SCSI) I 16:47:58 -> Drive 6 - Info: HL-DT-ST DVD-RAM GH22LP20 2.00 (I:) (USB) I 16:47:58 -> Drive 7 - Info: TSSTcorp DVD-ROM SH-D162D SB00 (M:) (USB) I 16:47:58 Found 5 DVD-ROMs, 1 DVD±RW/RAM and 1 BD-ROM/DVD±RW! I 16:49:03 Operation Started! I 16:49:03 Source File: D:\2010.iso I 16:49:03 Source File Sectors: 3.827.488 (MODE1/2048) I 16:49:03 Source File Size: 7.838.695.424 bytes I 16:49:03 Source File Volume Identifier: DVD_ROM I 16:49:03 Source File Volume Set Identifier: ec67c000MS UDFBridge I 16:49:03 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 16:49:03 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 16:49:03 Source File File System(s): ISO9660; UDF (1.50) I 16:49:03 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GH22LP20 2.00 (I:) (USB) I 16:49:03 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x; 10x) I 16:49:03 Destination Media Sectors: 4.173.792 I 16:49:03 Write Mode: DVD I 16:49:03 Write Type: DAO I 16:49:03 Write Speed: 4x I 16:49:03 Link Size: Auto I 16:49:03 Lock Volume: Yes I 16:49:03 Test Mode: No I 16:49:03 OPC: No I 16:49:03 BURN-Proof: Enabled E 16:49:20 Failed to lock drive for exclusive access. E 16:49:20 Reason: Zugriff verweigert E 16:49:26 Operation Aborted! - Duration: 00:00:17 I 16:49:26 Average Write Rate: N/A - Maximum Write Rate: N/A I 16:50:43 Operation Started! I 16:50:43 Source File: D:\2010.iso I 16:50:43 Source File Sectors: 3.827.488 (MODE1/2048) I 16:50:43 Source File Size: 7.838.695.424 bytes I 16:50:43 Source File Volume Identifier: DVD_ROM I 16:50:43 Source File Volume Set Identifier: ec67c000MS UDFBridge I 16:50:43 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 16:50:43 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 16:50:43 Source File File System(s): ISO9660; UDF (1.50) I 16:50:43 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GH22LP20 2.00 (I:) (USB) I 16:50:43 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x; 10x) I 16:50:43 Destination Media Sectors: 4.173.792 I 16:50:43 Write Mode: DVD I 16:50:43 Write Type: DAO I 16:50:43 Write Speed: 4x I 16:50:43 Link Size: Auto I 16:50:43 Lock Volume: Yes I 16:50:43 Test Mode: No I 16:50:43 OPC: No I 16:50:43 BURN-Proof: Enabled I 16:50:43 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x) I 16:50:43 Book Type Setting: N/A I 16:50:43 User Specified L0 Data Zone Capacity: 1.913.760 W 16:52:01 Set L0 Data Zone Capacity Failed! - Reason: No Additional Sense Information I 16:52:02 Filling Buffer... (40 MB) I 16:52:03 Writing LeadIn... I 16:52:35 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 16:52:35 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 16:52:35 Writing Layer 0... (LBA: 0 - 1913759) I 17:04:51 Writing Layer 1... (LBA: 1913760 - 3827487) I 17:16:46 Synchronising Cache... I 17:16:47 Closing Track... I 17:16:48 Finalising Disc... I 17:17:39 Exporting Graph Data... I 17:17:39 Graph Data File: C:\Users\admin\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GH22LP20_2.00_DIENSTAG-16-NOVEMBER-2010_16-50_MKM-003-00_4x.ibg I 17:17:39 Export Successfully Completed! I 17:17:39 Operation Successfully Completed! - Duration: 00:26:50 I 17:17:39 Average Write Rate: 5.279 KB/s (3.8x) - Maximum Write Rate: 5.598 KB/s (4.0x) I 18:23:18 Close Request Acknowledged I 18:23:18 Closing Down... I 18:23:18 Shutting down SPTI... I 18:23:19 ImgBurn closed! Thanks for your support. M. ;

Hello, I always get the following error "Set L0 Data Zone Capacity Failed! - Reason: No Additional Sense Information " with my new DVD-Burner from LG. I use Verbatim 8x DVD+R DL and i made an update with the newest firmware 2.0 for the LG Burner. Here's my log: //****************************************\\ ; ImgBurn Version 2.5.2.0 - Log ; Montag, 01 November 2010, 11:20:35 ; \\****************************************// ; ; I 11:06:28 ImgBurn Version 2.5.2.0 started! I 11:06:28 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 11:06:28 Total Physical Memory: 3.141.664 KB - Available: 1.624.596 KB W 11:06:28 Drive J:\ (FAT32) does not support single files > 4 GB in size. W 11:06:28 Drive M:\ (FAT32) does not support single files > 4 GB in size. W 11:06:28 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 11:06:28 Initialising SPTI... I 11:06:28 Searching for SCSI / ATAPI devices... I 11:06:28 -> Drive 1 - Info: Slimtype BD E DS4E1S EA12 (F:) (ATAPI) I 11:06:28 -> Drive 2 - Info: Generic DVDROM (E:) (SCSI) I 11:06:28 -> Drive 3 - Info: Generic DVDROM (G:) (SCSI) I 11:06:28 -> Drive 4 - Info: Generic DVDROM (H:) (SCSI) I 11:06:28 -> Drive 5 - Info: Generic DVDROM (L:) (SCSI) I 11:06:29 -> Drive 6 - Info: HL-DT-ST DVD-RAM GH22LP20 2.00 (I:) (USB) I 11:06:29 Found 4 DVD-ROMs, 1 DVDRW/RAM and 1 BD-ROM/DVDRW! I 11:06:38 Operation Started! I 11:06:38 Source File: D:\hallo.iso I 11:06:38 Source File Sectors: 3.827.488 (MODE1/2048) I 11:06:39 Source File Size: 7.838.695.424 bytes I 11:06:39 Source File Volume Identifier: DVD_ROM I 11:06:39 Source File Volume Set Identifier: ec67c000MS UDFBridge I 11:06:39 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 11:06:39 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 11:06:39 Source File File System(s): ISO9660; UDF (1.50) I 11:06:39 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GH22LP20 2.00 (I:) (USB) I 11:06:39 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x; 10x) I 11:06:39 Destination Media Sectors: 4.173.824 I 11:06:39 Write Mode: DVD I 11:06:39 Write Type: DAO I 11:06:39 Write Speed: 2,4x I 11:06:39 Link Size: Auto I 11:06:39 Lock Volume: Yes I 11:06:39 Test Mode: No I 11:06:39 OPC: No I 11:06:39 BURN-Proof: Enabled W 11:06:39 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x) I 11:06:39 Book Type Setting: N/A I 11:06:39 User Specified L0 Data Zone Capacity: 1.913.760 E 11:10:42 Set L0 Data Zone Capacity Failed! - Reason: No Additional Sense Information E 11:10:46 Operation Failed! - Duration: 00:04:03 I 11:10:46 Average Write Rate: N/A - Maximum Write Rate: N/A I 11:20:35 Close Request Acknowledged I 11:20:35 Closing Down... I 11:20:35 Shutting down SPTI... I 11:20:35 ImgBurn closed! Please help me. Thanks. Best Regards M.