anghel99

Came to the conclusion that I have an ASUS board. Sorry for the confusion. I'm not sure exactly what it is though. This is the info I have on it: Board: ASUSTek Computer INC. Basswood3G 1.05 Serial Number: MS1C76S31300093 Bus Clock: 266 megahertz BIOS: Phoenix Technologies, LTD 5.09 06/08/2007

The drivers won't install on Windows 7. I'm going to make sure I have an Intel motherboard and then try to see if those first drivers you suggested I download are installed right.

Still no good. Same error plus now I'm getting something new when it retries I think: I 07:19:44 ImgBurn Version 2.5.2.0 started! I 07:19:44 Microsoft Windows 7 Enterprise Edition (6.1, Build 7600) I 07:19:44 Total Physical Memory: 3,406,292 KB - Available: 1,908,116 KB I 07:19:44 Initialising SPTI... I 07:19:44 Searching for SCSI / ATAPI devices... I 07:19:44 -> Drive 1 - Info: TSSTcorp CD/DVDW TS-H653L 0514 (E:) (ATAPI) I 07:19:44 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (K:) (Unknown) I 07:19:44 -> Drive 3 - Info: MagicISO Virtual DVD-ROM 1.0A (M:) (Unknown) I 07:19:44 -> Drive 4 - Info: MagicISO Virtual DVD-ROM 1.0A (N:) (Unknown) I 07:19:44 -> Drive 5 - Info: MagicISO Virtual DVD-ROM 1.0A (O:) (Unknown) I 07:19:44 Found 4 DVD-ROMs and 1 DVD±RW/RAM! I 07:21:39 Operation Started! I 07:21:39 Source File: L:\Downloads\Batman.Arkham.Asylum-RELOADED\rld-btaa.iso I 07:21:40 Source File Sectors: 4,164,416 (MODE1/2048) I 07:21:40 Source File Size: 8,528,723,968 bytes I 07:21:40 Source File Volume Identifier: BATMANAA I 07:21:40 Source File Volume Set Identifier: 4AADF0264AADF008 I 07:21:40 Source File Implementation Identifier: ImgBurn I 07:21:40 Source File File System(s): UDF (1.02) I 07:21:40 Destination Device: [0:1:0] TSSTcorp CD/DVDW TS-H653L 0514 (E:) (ATAPI) I 07:21:40 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 4x, 6x, 8x) I 07:21:40 Destination Media Sectors: 4,173,824 I 07:21:40 Write Mode: DVD I 07:21:40 Write Type: DAO I 07:21:40 Write Speed: MAX I 07:21:40 Link Size: Auto I 07:21:40 Lock Volume: Yes I 07:21:40 Test Mode: No I 07:21:40 OPC: No I 07:21:40 BURN-Proof: Enabled I 07:21:40 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 07:21:40 Book Type Setting: DVD-ROM I 07:21:40 Optimal L0 Data Zone Capacity: 2,082,208 I 07:21:40 Optimal L0 Data Zone Method: ECC Block Boundary W 07:47:04 Set L0 Data Zone Capacity Failed! - Reason: The request could not be performed because of an I/O device error. I 07:47:04 Filling Buffer... (40 MB) I 07:47:05 Writing LeadIn... W 07:50:14 Failed to Write Sectors 0 - 31 - Reason: The request could not be performed because of an I/O device error. W 07:50:14 Retrying (1 of 20)... W 07:50:14 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred W 07:50:14 Retrying (2 of 20)... W 07:53:24 Retry Failed - Reason: The request could not be performed because of an I/O device error. W 07:53:25 Retrying (3 of 20)... W 07:53:25 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred W 07:53:25 Retrying (4 of 20)... W 07:56:35 Retry Failed - Reason: The request could not be performed because of an I/O device error. W 07:56:35 Retrying (5 of 20)... W 07:56:35 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred W 07:56:35 Retrying (6 of 20)...

Okay, so I recently bought some Dual Layer DVD+R disks (Memorex) and I've suceded in making three coasters in about half an hour. Basically I'm trying to write the ISO of a game on the DVD so that I don't have to keep it on the computer and load it through a virtual drive. The ISO itself is fine, I could install the game from it no problem. However, when I tried burning it onto a DL disk with Roxio, it got about a quarter of the way through before having some read error or another (CAB 2 or something). So then I figured to use ImgBurn. Now I'm getting some I/O error. It's not done doing its retrys yet, but I have a feeling nothing will be accomplished. Log so far: I 23:32:56 ImgBurn Version 2.5.2.0 started! I 23:32:56 Microsoft Windows 7 Enterprise Edition (6.1, Build 7600) I 23:32:56 Total Physical Memory: 3,406,292 KB - Available: 1,953,492 KB I 23:32:56 Initialising SPTI... I 23:32:56 Searching for SCSI / ATAPI devices... I 23:32:56 -> Drive 1 - Info: TSSTcorp CD/DVDW TS-H653L 0514 (E:) (ATAPI) I 23:32:56 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (K:) (Unknown) I 23:32:56 -> Drive 3 - Info: MagicISO Virtual DVD-ROM 1.0A (M:) (Unknown) I 23:32:56 -> Drive 4 - Info: MagicISO Virtual DVD-ROM 1.0A (N:) (Unknown) I 23:32:56 -> Drive 5 - Info: MagicISO Virtual DVD-ROM 1.0A (O:) (Unknown) I 23:32:56 Found 4 DVD-ROMs and 1 DVD±RW/RAM! I 23:39:28 Operation Started! I 23:39:28 Source File: L:\Downloads\Batman.Arkham.Asylum-RELOADED\rld-btaa.iso I 23:39:28 Source File Sectors: 4,164,416 (MODE1/2048) I 23:39:28 Source File Size: 8,528,723,968 bytes I 23:39:28 Source File Volume Identifier: BATMANAA I 23:39:28 Source File Volume Set Identifier: 4AADF0264AADF008 I 23:39:28 Source File Implementation Identifier: ImgBurn I 23:39:28 Source File File System(s): UDF (1.02) I 23:39:28 Destination Device: [0:1:0] TSSTcorp CD/DVDW TS-H653L 0514 (E:) (ATAPI) I 23:39:28 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 4x, 6x, 8x) I 23:39:28 Destination Media Sectors: 4,173,824 I 23:39:28 Write Mode: DVD I 23:39:28 Write Type: DAO I 23:39:28 Write Speed: MAX I 23:39:28 Link Size: Auto I 23:39:28 Lock Volume: Yes I 23:39:28 Test Mode: No I 23:39:28 OPC: No I 23:39:28 BURN-Proof: Enabled I 23:39:28 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 23:39:28 Book Type Setting: DVD-ROM I 23:39:28 Optimal L0 Data Zone Capacity: 2,082,208 I 23:39:28 Optimal L0 Data Zone Method: ECC Block Boundary W 23:45:26 Set L0 Data Zone Capacity Failed! - Reason: The request could not be performed because of an I/O device error. I 23:45:27 Filling Buffer... (40 MB) I 23:45:28 Writing LeadIn... W 23:51:26 Failed to Write Sectors 0 - 31 - Reason: The request could not be performed because of an I/O device error. W 23:51:27 Retrying (1 of 20)... W 23:54:37 Retry Failed - Reason: The request could not be performed because of an I/O device error. W 23:54:37 Retrying (2 of 20)... W 23:57:47 Retry Failed - Reason: The request could not be performed because of an I/O device error. W 23:57:47 Retrying (3 of 20)...