spenser

This time it worked! There was no problem with the disc, but disabling DVD-RAM/BD-RE Fast Write made the trick. Thanks

It seems I made a mistake the log was not attached. Here it is. ImgBurn.log

I did as you requested and I burnt at 2 k. But once again I received miscompare error when verifying. According to your advice I tried to continue the process but after several and continuous miscompare error more the program offered to disregard miscompare error what I did. But then after numberless other read errors I disregarded then too and finally the verifying stopped and I canceled the job. Attached the session log.

Yes, I disabled AnyDVD. I'll follow your advise. I will burn at 2x and, in case the problem appears again I'll continue verifying and I'll post the result. Thanks

Ooooops! I cannot understand what heppened. Maybe I sent the wrong file. If this is the case I apologize. Here is the output in my log with the word miscompare highlighted (BTW, I think it's not true that my drive only support writing at 2k. Actually it supports higher speeds but usually I reduce it to 4 K because on one ocassion I had a problem and you advised me in that way). ; //****************************************\\ ; ImgBurn Version 2.5.7.0 - Log ; Saturday, 22 September 2012, 23:22:11 ; \\****************************************// ; ; I 20:20:42 ImgBurn Version 2.5.7.0 started! I 20:20:42 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 20:20:42 Total Physical Memory: 9.427.956 KB - Available: 4.892.424 KB W 20:20:42 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! I 20:20:42 Initialising SPTI... I 20:20:42 Searching for SCSI / ATAPI devices... I 20:20:44 -> Drive 1 - Info: PIONEER BD-RW BDR-206 1.06 (E:) (ATAPI) I 20:20:44 -> Drive 2 - Info: PLDS DVDRWBD DH-6E2S 7D12 (F:) (ATAPI) I 20:20:44 -> Drive 3 - Info: ROXIO DVD-ROM EMULATOR 2.00 (H:) (SCSI) I 20:20:44 Found 1 DVD-ROM, 1 BD-ROM/DVD±RW and 1 BD-RE! I 20:43:11 Operation Started! I 20:43:11 Building Image Tree... I 20:43:25 Calculating Totals... I 20:43:25 Preparing Image... I 20:43:26 Contents: 437 Files, 21 Folders I 20:43:26 Content Type: BD Video I 20:43:26 Data Type: MODE1/2048 I 20:43:26 File System(s): UDF (2.50) I 20:43:26 Volume Label: The.Hunger.Games.2012.1080p.Blu-Ray.AVC.DTS-HD.MA.7.1-PublicHD I 20:43:26 Size: 47.961.399.176 bytes I 20:43:26 Sectors: 23.418.915 I 20:43:26 Image Size: 47.964.815.360 bytes I 20:43:26 Image Sectors: 23.420.320 I 20:43:28 Operation Successfully Completed! - Duration: 00:00:16 I 20:43:28 Operation Started! I 20:43:28 Source File: -==/\/[bUILD IMAGE]\/\==- I 20:43:28 Source File Sectors: 23.420.320 (MODE1/2048) I 20:43:28 Source File Size: 47.964.815.360 bytes I 20:43:28 Source File Volume Identifier: The.Hunger.Games.2012.1080p.Blu-Ray.AVC.DTS-HD.MA.7.1-PublicHD I 20:43:28 Source File Volume Set Identifier: 4136A56501655B63 I 20:43:28 Source File Application Identifier: ImgBurn v2.5.7.0 I 20:43:28 Source File Implementation Identifier: ImgBurn I 20:43:28 Source File File System(s): UDF (2.50) I 20:43:28 Destination Device: [1:0:0] PIONEER BD-RW BDR-206 1.06 (E:) (ATAPI) I 20:43:28 Destination Media Type: BD-RE (Disc ID: MEI-T01-001) I 20:43:28 Destination Media Supported Write Speeds: 2x I 20:43:28 Destination Media Sectors: 24.438.784 I 20:43:28 Write Mode: BD I 20:43:28 Write Type: DAO I 20:43:28 Write Speed: 4x I 20:43:28 Hardware Defect Management Active: No I 20:43:28 BD-RE FastWrite: Yes I 20:43:28 Link Size: Auto I 20:43:28 Lock Volume: Yes I 20:43:28 Test Mode: No I 20:43:28 OPC: No I 20:43:28 BURN-Proof: Enabled W 20:43:28 Write Speed Miscompare! - Wanted: 17.983 KB/s (4x), Got: 8.990 KB/s (2x) W 20:43:28 The drive only supports writing these discs at 2x. I 20:43:28 Advanced Settings - Optimal Writing Speed: No I 20:43:28 Filling Buffer... (40 MB) I 20:43:31 Writing LeadIn... I 20:43:42 Writing Session 1 of 1... (1 Track, LBA: 0 - 23420319) I 20:43:42 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 23420319) I 20:43:42 Writing Layer 0... (LBA: 0 - 12219391) I 21:30:28 Writing Layer 1... (LBA: 12219392 - 23420319) I 22:13:28 Synchronising Cache... I 22:13:29 Exporting Graph Data... I 22:13:29 Graph Data File: C:\Users\JMF\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-206_1.06_22-SEPTEMBER-2012_20-43_MEI-T01-001_4x.ibg I 22:13:29 Export Successfully Completed! I 22:13:29 Operation Successfully Completed! - Duration: 01:30:01 I 22:13:29 Average Write Rate: 8.696 KB/s (1.9x) - Maximum Write Rate: 9.042 KB/s (2.0x) I 22:13:29 Cycling Tray before Verify... I 22:14:06 Device Ready! I 22:14:06 Operation Started! I 22:14:06 Source Device: [1:0:0] PIONEER BD-RW BDR-206 1.06 (E:) (ATAPI) I 22:14:06 Source Media Type: BD-RE (Disc ID: MEI-T01-001) I 22:14:06 Source Media Supported Write Speeds: 2x I 22:14:06 Image File: -==/\/[bUILD IMAGE]\/\==- I 22:14:06 Image File Sectors: 23.420.320 (MODE1/2048) I 22:14:06 Image File Size: 47.964.815.360 bytes I 22:14:06 Image File Volume Identifier: The.Hunger.Games.2012.1080p.Blu-Ray.AVC.DTS-HD.MA.7.1-PublicHD I 22:14:06 Image File Volume Set Identifier: 4136A56501655B63 I 22:14:06 Image File Application Identifier: ImgBurn v2.5.7.0 I 22:14:06 Image File Implementation Identifier: ImgBurn I 22:14:06 Image File File System(s): UDF (2.50) I 22:14:07 Read Speed (Data/Audio): MAX / MAX I 22:14:08 Verifying Session 1 of 1... (1 Track, LBA: 0 - 23420319) I 22:14:08 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 23420319) I 22:14:08 Verifying Layer 0... (LBA: 0 - 12219391) E 23:16:15 Miscompare at LBA: 4981984, Offset: 0, File: \BDMV\STREAM\00501.m2ts E 23:16:15 Device: 0x29 E 23:16:15 Image File: 0x7A E 23:16:15 Total Errors in Sector: 2.036 E 23:16:15 Failed to Verify Sectors! I 23:16:18 Exporting Graph Data... I 23:16:18 Graph Data File: C:\Users\JMF\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-206_1.06_22-

I burned blu ray folders to a Verbatim BS-R 50 Gb disc. When verifying the disc I received an error message and although I was able to begin playing the disc on the blu ray player after a short while it stopped. I tried again, this time with a Sony BD-RE in order to avoid another coaster. Once again, when verifying I received the following message: "Miscompare t LBA:4981984, Offset: 0. Fole:\BDMV\STREAM\00501.m2ts. Device: 0x29. Imgew File: 0x7A. Total errors in Sector: 2036". Attached the log file. Thanks in advance for any help on this issue ImgBurn.log

Slowing the writing speed to 4x solved it. I hadn't thought about it because I never had a problem in the past burning DVD's or BD's with ImgBurn at full speed. Well, always there's a first time. Thank you very much for your help

Thanks for your reply. I'll try again, reducing the speed. In the meantime here is the Family Tree you requested: I 20:21:30 Family Tree: I 20:21:30 -> ACPI x64-based PC I 20:21:30 -> Microsoft ACPI-Compliant System I 20:21:30 -> PCI bus I 20:21:30 -> Intel® ICH10R SATA AHCI Controller (VEN_8086&DEV_3A22 - Intel - iaStor - v10.1.0.1008) I 20:21:30 -> CD-ROM Drive (PIONEER BD-RW BDR-206) (0)

I tried to write a BD folfer to a Verbatim BD-R 25 GB. After a while the work stopped and I received a i/O error messaage. I've attached the log file and the full error message. Any idea about what's going on will be appreciated ImgBurn.log Addenda: I tried a second time using a Momorex BD-r. This time, apparently, there was no problem with the burning. But ImgBurn couldn't verify. First there was a message about a failure to close the tray, that being usual with laptop computers. But I was using a desktop computer, the tray was closed and when I tried to open and clsoe it again there was a message saying Device not ready (The parameter is incorrect). The resulting disc couldn't be read or even recognized on my computer or on my BD player. New log attached. ImgBurn2.log

Hi, I don´t want to become a nuisance but I´haven´t found any help outside this Forum. First of all I would like to know if Lightning UK´s request for screenshots is fulfilled. In case I missed something please let me know and I´ll post it. I also want to tell about as new development. Today ImgBurn failed to burn a DVD9 disc. That´s a first time because before the problems only arose when using BD 50 Gb media. Until today I had no problems burning ISO's to BD25, DVD9 or DVD4. But the error message is very similar to the previous one. So I think that maybe someone could find some clue about what´s happening. Here´s the log: I 12:50:03 Operation Started! I 12:50:03 Source File: C:\Users\JMF\Media Download\JDownloader\Good Morning Vietnam 1987\Good Morning Vietnam.mds I 12:50:03 Source File Sectors: 3.908.224 (MODE1/2048) I 12:50:03 Source File Size: 8.004.042.752 bytes I 12:50:03 Source File Volume Identifier: Good Morning Vietnam I 12:50:03 Source File Volume Set Identifier: 3E6C6057003BA27F I 12:50:03 Source File Application Identifier: IMGBURN V2.5.5.0 - THE ULTIMATE IMAGE BURNER! I 12:50:03 Source File Implementation Identifier: ImgBurn I 12:50:03 Source File File System(s): ISO9660; UDF (1.02) I 12:50:03 Destination Device: [1:1:0] PLDS DVDRWBD DH-6E2S 7D12 (F:) (ATAPI) I 12:50:03 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 4x) I 12:50:03 Destination Media Sectors: 4.173.824 I 12:50:03 Write Mode: DVD I 12:50:03 Write Type: DAO I 12:50:03 Write Speed: MAX I 12:50:03 Link Size: Auto I 12:50:03 Lock Volume: Yes I 12:50:03 Test Mode: No I 12:50:03 OPC: No I 12:50:03 BURN-Proof: Enabled I 12:50:03 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x) I 12:50:03 Optimal L0 Data Zone Capacity: 1.965.904 I 12:50:03 Optimal L0 Data Zone Method: Copied From Original Disc I 12:50:22 Set L0 Data Zone Capacity Succeeded! I 12:50:22 Filling Buffer... (40 MB) I 12:50:23 Writing LeadIn... I 12:50:24 Writing Session 1 of 1... (1 Track, LBA: 0 - 3908223) I 12:50:24 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3908223) I 12:50:24 Writing Layer 0... (LBA: 0 - 1965903) W 12:56:05 Failed to Write Sectors 91712 - 91743 - Reason: The request could not be performed because of an I/O device error. W 12:56:05 Retrying (1 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (2 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (3 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (4 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (5 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (6 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (7 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (8 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (9 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (10 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (11 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (12 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (13 of 20)... W 12:56:26 Retry Failed - Reason: Invalid Address For Write W 12:56:26 Retrying (14 of 20)... W 12:56:26 Retry Failed - Reason: Invalid Address For Write W 12:56:26 Retrying (15 of 20)... W 12:56:26 Retry Failed - Reason: Invalid Address For Write W 12:56:26 Retrying (16 of 20)... W 12:56:26 Retry Failed - Reason: Invalid Address For Write W 12:56:26 Retrying (17 of 20)... W 12:56:26 Retry Failed - Reason: Invalid Address For Write W 12:56:26 Retrying (18 of 20)... W 12:56:26 Retry Failed - Reason: Invalid Address For Write W 12:56:26 Retrying (19 of 20)... W 12:56:26 Retry Failed - Reason: Invalid Address For Write W 12:56:26 Retrying (20 of 20)... W 12:56:26 Retry Failed - Reason: Invalid Address For Write W 12:57:18 Retrying (21)... W 12:57:18 Retry Failed - Reason: Invalid Address For Write E 12:57:24 Failed to Write Sectors 91712 - 91743 - Reason: The request could not be performed because of an I/O device error. E 12:57:24 Next Writable Address: 91096 I 12:57:24 Synchronising Cache... W 12:57:29 User opted to skip the 'Close Track/Session/Disc' functions. E 12:57:29 Failed to Write Image! I 12:57:29 Exporting Graph Data... I 12:57:30 Graph Data File: C:\Users\JMF\AppData\Roaming\ImgBurn\Graph Data Files\PLDS_DVDRWBD_DH-6E2S_7D12_12-MARCH-2011_12-50_MKM-001-00_MAX.ibg I 12:57:30 Export Successfully Completed! E 12:57:30 Operation Failed! - Duration: 00:07:26 I 12:57:30 Average Write Rate: 436 KB/s (0.3x) - Maximum Write Rate: 5.577 KB/s (4.0x) Any feedback will be highly appreciated

Attached the requested information. Thanks for your help !

Thanks for your help No option in the BIOS to disable both of them. It´s RAID or AHCI. According to the Control Panel info I´ve an IDE ATA/ATAPI Intel controller and a IEEE 1394 Host Controller JMicron. If I understand correctly you´re saying that if the BD drive is connected to the Firewire controller I ought to switch it to the Intel controller ? Please forgive my question but my knowledge on this matter is limited as surely you´ll have realized. By the way, today I tried to burn the same input to the same BD-RW DL media using Nero Burning ROM. No failure, no error message, the task was completed successfully. I can watch the video. But if I switch to an scene more or less close to the end of the video after one or two seconds the image freezes and I cannot go on.

Just in case someone find a problem like mine, and trying to be helpful, here is the situation so far: 1. I´ve no problems burning BD-R 25 Gb. Previously I thought I had, but it was a video player software problem. The disc was right. 2. The problem arises when trying to burn double layers BD-RE 3. The failure always occur at the same point (58% of the task completed; size: 24.220.008.448 bytes) 4. Roxio software also fails to fulfill the task. So ImgBurn is not to be blamed. 5. I´ve the latest drivers and firmware installed 6. Previous to the burning I can play the blu-ray folder and files on my computer. So, the input is right. 7. The failures always happened using BD-RE DL media. I´ll buy some BD-R DL to see what happens -that´s becoming expensive!- 8. At that point I´m almost absolutely sure that´s a layer break point problem. I haven´t the slightest idea about how to fix it but I´ll continue trying to find out.

Well, after repeated failures I´ve decided to try something different. I tried to burn an smaller iso file (less than 25 Gb) on the same Verbatim BD-RE DL that I´ve used before. The burning failed but the important fact it that it stopped at exactly the same point that had stopped the previous re4cordings. In other words:_ in all the cases the burning stopped after writing 11826176 sectors or 24.220.008.448 bytes. I guess that means something (problems when it bagins to write the second layer ?) but regretfully my knowledge about BD burning is almost nil. Could someone please give some idea ? I would really appreciate it. This is the new log: I 22:07:20 ImgBurn Version 2.5.5.0 started! I 22:07:20 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 22:07:20 Total Physical Memory: 9.427.956 KB - Available: 6.541.968 KB I 22:07:20 Initialising SPTI... I 22:07:20 Searching for SCSI / ATAPI devices... I 22:07:21 -> Drive 1 - Info: PIONEER BD-RW BDR-206 1.05 (E:) (ATAPI) I 22:07:21 -> Drive 2 - Info: PLDS DVDRWBD DH-6E2S 7D12 (F:) (ATAPI) I 22:07:21 -> Drive 3 - Info: ROXIO DVD-ROM EMULATOR 2.00 (H:) (SCSI) I 22:07:21 -> Drive 4 - Info: SanDisk Cruzer 8.01 (K:) (USB) I 22:07:21 Found 1 DVD-ROM, 1 BD-ROM/DVD±RW, 1 BD-RE and 1 Unknown! I 22:07:40 Operation Started! I 22:07:40 Source File: D:\Videos\Movies\Campeones\Campeones (2008).iso I 22:07:40 Source File Sectors: 12.023.040 (MODE1/2048) I 22:07:40 Source File Size: 24.623.185.920 bytes I 22:07:40 Source File Volume Identifier: _Campeones I 22:07:40 Source File Volume Set Identifier: 3D8B723400B773EC I 22:07:40 Source File Application Identifier: ImgBurn v2.5.3.0 I 22:07:40 Source File Implementation Identifier: ImgBurn I 22:07:40 Source File File System(s): UDF (2.50) I 22:07:40 Destination Device: [1:0:0] PIONEER BD-RW BDR-206 1.05 (E:) (ATAPI) I 22:07:40 Destination Media Type: BD-RE (Disc ID: MEI-T01-001) (Speeds: 2x) I 22:07:40 Destination Media Sectors: 23.652.352 I 22:07:40 Write Mode: BD I 22:07:40 Write Type: DAO I 22:07:40 Write Speed: MAX I 22:07:40 BD-RE FastWrite: Yes I 22:07:40 Link Size: Auto I 22:07:40 Lock Volume: Yes I 22:07:40 Test Mode: No I 22:07:40 OPC: No I 22:07:40 BURN-Proof: Enabled I 22:07:40 Write Speed Successfully Set! - Effective: 8.990 KB/s (2x) I 22:07:40 Advanced Settings - Optimal Writing Speed: No I 22:07:41 Filling Buffer... (40 MB) I 22:07:41 Writing LeadIn... I 22:07:51 Writing Session 1 of 1... (1 Track, LBA: 0 - 12023039) I 22:07:51 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 12023039) W 22:58:41 Failed to Write Sectors 11826176 - 11826207 - Reason: The request could not be performed because of an I/O device error. W 22:58:41 Retrying (1 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (2 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (3 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (4 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (5 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (6 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (7 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (8 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (9 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (10 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (11 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (12 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (13 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (14 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (15 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (16 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (17 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (18 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (19 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (20 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. E 22:58:56 Failed to Write Sectors 11826176 - 11826207 - Reason: The request could not be performed because of an I/O device error. I 22:58:56 Synchronising Cache... W 22:58:56 Synchronise Cache Failed! - Reason: The parameter is incorrect. W 22:58:56 Retrying (1 of 3)... W 22:58:56 Retry Failed - Reason: The parameter is incorrect. W 22:58:56 Retrying (2 of 3)... W 22:58:56 Retry Failed - Reason: The parameter is incorrect. W 22:58:56 Retrying (3 of 3)... W 22:58:56 Retry Failed - Reason: The parameter is incorrect. W 22:59:06 User opted to skip the 'Close Track/Session/Disc' functions. E 22:59:06 Failed to Write Image! I 22:59:06 Exporting Graph Data... I 22:59:06 Graph Data File: C:\Users\JMF\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-206_1.05_24-FEBRUARY-2011_22-07_MEI-T01-001_MAX.ibg I 22:59:06 Export Successfully Completed! E 22:59:06 Operation Failed! - Duration: 00:51:26 I 22:59:06 Average Write Rate: 7.719 KB/s (1.7x) - Maximum Write Rate: 9.043 KB/s (2.0x)

I Installed the Intel Rapid Storage Technology driver and tried again but with the same result. The burning was interrupted exactly at the same place (58% of the task completed; size: 24.220.008.448 bytes. The I/O error message is also exactly the same I don´tnotice any difference with the log, either: I 01:50:20 ImgBurn Version 2.5.5.0 started! I 01:50:20 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 01:50:20 Total Physical Memory: 9.427.956 KB - Available: 7.311.612 KB I 01:50:20 Initialising SPTI... I 01:50:20 Searching for SCSI / ATAPI devices... I 01:50:20 -> Drive 1 - Info: PIONEER BD-RW BDR-206 1.05 (E:) (ATAPI) I 01:50:20 -> Drive 2 - Info: PLDS DVDRWBD DH-6E2S 7D12 (F:) (ATAPI) I 01:50:20 -> Drive 3 - Info: ROXIO DVD-ROM EMULATOR 2.00 (H:) (SCSI) I 01:50:20 -> Drive 4 - Info: SanDisk Cruzer 8.01 (K:) (USB) I 01:50:20 Found 1 DVD-ROM, 1 BD-ROM/DVD±RW, 1 BD-RE and 1 Unknown! I 01:52:38 Operation Started! I 01:52:38 Building Image Tree... W 01:52:39 Skipped Hidden File: D:\Videos\Movies\Travels\BD\BDMV\STREAM\Thumbs.db I 01:52:44 Corrected file system selection for Blu-ray Video disc. I 01:52:44 Corrected UDF revision selection for Blu-ray Video disc. I 01:52:54 Calculating Totals... I 01:52:54 Preparing Image... I 01:52:54 Contents: 536 Files, 46 Folders I 01:52:54 Content Type: BD Video I 01:52:54 Data Type: MODE1/2048 I 01:52:54 File System(s): UDF (2.50) I 01:52:54 Volume Label: BD I 01:52:54 Size: 41.738.424.667 bytes I 01:52:54 Sectors: 20.380.442 I 01:52:54 Image Size: 41.742.630.912 bytes I 01:52:54 Image Sectors: 20.382.144 I 01:52:56 Operation Successfully Completed! - Duration: 00:00:18 I 01:52:57 Operation Started! I 01:52:57 Source File: -==/\/[bUILD IMAGE]\/\==- I 01:52:57 Source File Sectors: 20.382.144 (MODE1/2048) I 01:52:57 Source File Size: 41.742.630.912 bytes I 01:52:57 Source File Volume Identifier: BD I 01:52:57 Source File Volume Set Identifier: 3E570E930136FEFA I 01:52:57 Source File Application Identifier: ImgBurn v2.5.5.0 I 01:52:57 Source File Implementation Identifier: ImgBurn I 01:52:57 Source File File System(s): UDF (2.50) I 01:52:57 Destination Device: [1:0:0] PIONEER BD-RW BDR-206 1.05 (E:) (ATAPI) I 01:52:57 Destination Media Type: BD-RE (Disc ID: MEI-T01-001) (Speeds: 2x) I 01:52:57 Destination Media Sectors: 23.652.352 I 01:52:57 Write Mode: BD I 01:52:57 Write Type: DAO I 01:52:57 Write Speed: MAX I 01:52:57 BD-RE FastWrite: Yes I 01:52:57 Link Size: Auto I 01:52:57 Lock Volume: Yes I 01:52:57 Test Mode: No I 01:52:57 OPC: No I 01:52:57 BURN-Proof: Enabled I 01:52:57 Write Speed Successfully Set! - Effective: 8.990 KB/s (2x) I 01:52:57 Advanced Settings - Optimal Writing Speed: No I 01:52:58 Filling Buffer... (40 MB) I 01:53:00 Writing LeadIn... I 01:53:10 Writing Session 1 of 1... (1 Track, LBA: 0 - 20382143) I 01:53:10 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 20382143) I 01:53:10 Writing Layer 0... (LBA: 0 - 12219391) W 01:54:12 Device Removal Detected! W 01:54:12 The device list will be refreshed at the next available opportunity. W 02:43:39 Failed to Write Sectors 11826176 - 11826207 - Reason: The request could not be performed because of an I/O device error. W 02:43:39 Retrying (1 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (2 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (3 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (4 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (5 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (6 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (7 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (8 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (9 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (10 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (11 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (12 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (13 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (14 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (15 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (16 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (17 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (18 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (19 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (20 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 04:24:42 Retrying (21)... W 04:24:42 Retry Failed - Reason: The parameter is incorrect.