habitoti

Hi, is that suffcient information or do you need something else? (BTW: When the drive comes back after ~6 minutes of "reserving track", the media is a coaster -- status is incomplete and obviously some data written, next write position is some huge number then...) Regards, habitoti

I 10:03:17 ImgBurn Version 2.5.5.0 started! I 10:03:17 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 10:03:17 Total Physical Memory: 4.185.144 KB - Available: 3.049.088 KB I 10:03:17 Initialising SPTI... I 10:03:17 Searching for SCSI / ATAPI devices... I 10:03:17 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.00 (D:) (ATA) I 10:03:17 -> Drive 2 - Info: HL-DT-ST DVD-ROM GDR8163B 0L23 (E:) (ATA) I 10:03:17 Found 1 DVD-ROM and 1 BD-RE! I 10:03:33 Operation Started! I 10:03:33 Building Image Tree... I 10:03:33 Calculating Totals... I 10:03:33 Preparing Image... I 10:03:33 Contents: 9 Files, 14 Folders I 10:03:33 Content Type: BD Video I 10:03:34 Data Type: MODE1/2048 I 10:03:34 File System(s): UDF (2.50) I 10:03:34 Volume Label: [Not Configured] I 10:03:34 Size: 12.964.629.152 bytes I 10:03:34 Sectors: 6.330.391 I 10:03:34 Image Size: 12.965.642.240 bytes I 10:03:34 Image Sectors: 6.330.880 I 10:03:34 Operation Successfully Completed! - Duration: 00:00:00 I 10:04:32 Operation Started! I 10:04:32 Building Image Tree... I 10:04:32 Calculating Totals... I 10:04:32 Preparing Image... I 10:04:32 Contents: 9 Files, 14 Folders I 10:04:32 Content Type: BD Video I 10:04:32 Data Type: MODE1/2048 I 10:04:32 File System(s): UDF (2.50) I 10:04:32 Volume Label: Test I 10:04:32 Size: 12.964.629.152 bytes I 10:04:32 Sectors: 6.330.391 I 10:04:32 Image Size: 12.965.642.240 bytes I 10:04:32 Image Sectors: 6.330.880 I 10:04:35 Operation Successfully Completed! - Duration: 00:00:03 I 10:04:35 Operation Started! I 10:04:35 Source File: -==/\/[bUILD IMAGE]\/\==- I 10:04:35 Source File Sectors: 6.330.880 (MODE1/2048) I 10:04:36 Source File Size: 12.965.642.240 bytes I 10:04:36 Source File Volume Identifier: Test I 10:04:36 Source File Volume Set Identifier: 3E5B509000609997 I 10:04:36 Source File Application Identifier: ImgBurn v2.5.5.0 I 10:04:36 Source File Implementation Identifier: ImgBurn I 10:04:36 Source File File System(s): UDF (2.50) I 10:04:36 Destination Device: [2:1:0] HL-DT-ST BD-RE BH10LS30 1.00 (D:) (ATA) I 10:04:36 Destination Media Type: BD-R (Disc ID: RITEK-BR2-000) (Speeds: 2x; 4x; 6x; 8x) I 10:04:36 Destination Media Sectors: 12.219.392 I 10:04:36 Write Mode: BD I 10:04:36 Write Type: DAO I 10:04:36 Write Speed: MAX I 10:04:36 BD-R Verify Not Required: Yes I 10:04:36 Link Size: Auto I 10:04:36 Lock Volume: Yes I 10:04:36 Test Mode: Yes I 10:04:36 OPC: No I 10:04:36 BURN-Proof: Enabled I 10:04:36 Write Speed Successfully Set! - Effective: 35.964 KB/s (8x) After this, it won't continue, saying "Reserving Tracks..." forever with the drive spinning up & down endlessly... (for this log I switched on "Test Mode", but it's no different w/o it)

Hi, being a BD-newbie with my LG BH10LS30 I am a bit stuck on the following (with having no answer found via Google, FAQs and Forum search): I use Platinum 4x discs, which Amazon users praised as being very reliable and good quality. They state to be able to write them even at 8x speed, writing a complete 25GB disc in 11 min. I have the latest 1.00-09 FW with riplock patch, and reading is at a steady 20MB/s ok. However when writing with ImgBurn and Auto Writespeed, it selects 8x, but then the drive hangs right in the beginning with "Reserving Tracks" and not actually writing something. If I choose 6x or less explicitly, it will write flawlessly, however only at a write rate of <1MB/s (2.0), taking about 45min for a full BD disc. So anyone who had this issue as well and has a solution at hand? My PC is a pretty new one, with Asus P7P55 board, Intel Chips and i3 CPU, drives connected via SATA, so there should be no performance issue. Regards, habitoti