I am chasing a problem with PE9 burning Blue Ray disks. It wont play in my Pioneer player but will on my computer and an old Panasonic player.
A second one burnt with Powerproducer using the final M2ts file copied off the first BD disk plays OK even though it still reports in Imgburn as Incomplete.
The following is a report on the 'faulty ' burnt disk using Ingburn report:-
HL-DT-ST BD-RE BH10LS30 1.00 (ATA)
Current Profile: BD-R
Disc Information:
Status: Incomplete
State of Last Session: Incomplete
Erasable: No
Sessions: 1
Sectors: 11,826,176
Size: 24,220,008,448 bytes
Time: 2628:04:26 (MM:SS:FF)
Supported Write Speeds: 2x, 4x, 6x, 8x
TOC Information:
Session 1... (LBA: 0)
-> Track 01 (Mode 1, LBA: 0 - 11826175)
-> LeadOut (LBA: 11826176)
Disc Definition Structure:
ISA0 Size: 4,096 clustors - Full: No
OSA0 Size: 8,192 clustors - Full: No
Certified: No
Scanned: No
Manufacturers Name: HL-DT-ST
Additional ID: BD-RE BH10LS30
Serial Number: K9FA6255815
BD Disc Information:
Disc ID: VERBAT-IMc-000
Disc Type: BD-R
Disc Size: 120mm
Disc Class: 0
Disc Version: 1
Number of Layers: 1
Layer Type: Writable
DVD Layer Present: No
CD Layer Present: No
Channel Bit Length: 74.5nm (25GB Per Layer)
Push-Pull Polarity: Positive
Recorded Mark Polarity: HTL
BCA Present: Yes
Maximum Transfer Rate: Not Specified
First PAA of Data Zone: 131,072
Last PAA of Data Zone: 1,658,494
Performance (Write Speed):
Descriptor 1...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 11826175 (0x00B473FF)
-> RS: 21,350 KB/s (4.9x) - WS: 8,991 KB/s (2x)
Descriptor 2...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 11826175 (0x00B473FF)
-> RS: 21,350 KB/s (4.9x) - WS: 17,982 KB/s (4x)
Descriptor 3...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 11826175 (0x00B473FF)
-> RS: 21,350 KB/s (4.9x) - WS: 26,973 KB/s (6x)
Descriptor 4...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 11826175 (0x00B473FF)
-> RS: 21,350 KB/s (4.9x) - WS: 35,964 KB/s (8x)
