Thanks for the quick response!
I'm afraid I did a few other things which seem to have overwritten the original Imgburn log - however I do remember it said (something like)the same error that setting the booktype from the window icon did - ie couldn't do it......Ie it tried to change the booktype to DVD-ROM since it knew from the read that that's what it should be, but for some reason the drive didn't do it..... There were no other errors of any description during the creation of this DVD.
However here is the result of the coaster that the LG drive created......
Cut and Paste follows:
HL-DT-ST DVDRAM GSA-T50N RX06 (ATAPI)
Current Profile: DVD+R DL
Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 4,026,736
Size: 8,246,755,328 bytes
Time: 894:51:61 (MM:SS:FF)
File System Information:
Sectors: 4,026,736
Size: 8,246,755,328 bytes
Time: 894:51:61 (MM:SS:FF)
TOC Information:
Session 1... (LBA: 0)
-> Track 01 (Mode 1, LBA: 0 - 4026735)
-> LeadOut (LBA: 4026736)
Track Information:
Session 1...
-> Track 01 (LTSA: 0, LTS: 4026736, LRA: 0)
Disc Control Blocks Information:
HL-DT-ST GSA-T50N
Physical Format Information (Last Recorded - L0):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,563,407
Last Physical Sector in Layer 0: 2,218,575
Physical Format Information (Last Recorded - L1):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,563,407
Last Physical Sector in Layer 0: 2,218,575
Layer Information:
Layer 0 Sectors: 2,021,968 (50.21%)
Layer 1 Sectors: 2,004,768 (49.79%)