[HELP!!! Failed to Write Sectors 0 - 31 - Reason: Session Fixation Error Writing Lead In]

Well I'm happy to report that the Verb's (Verbatims) solved the problem! I will get a new drive for this machine, I know its old. Thanks for the help.

[HELP!!! Failed to Write Sectors 0 - 31 - Reason: Session Fixation Error Writing Lead In]

Thxs for the reply Cynthia. I used the latest version of Imgburn when I started getting this error, so I went back and found earlier versions to see if that would help. I've always used Verbatims and never had any problem. I switched over to the TDK about six months ago and never had a problem with them either. I'll go buy some Verb's just to rule that out also. Will keep you posted...

[HELP!!! Failed to Write Sectors 0 - 31 - Reason: Session Fixation Error Writing Lead In]

I've been using Imgburn for years and never had a problem. Just recently, I'm getting this error now when I try to burn disc. I updated my disc drive FW, still the same error. I'm stumped! Any help would be much appreciated. I,m using TDK DL DVD+R disc. I'm running XP service pack 3. Here is some specifics:

 

 

 

BENQ DVD DD DW1650 BCIC (ATA)

Current Profile: DVD+R DL

 

Disc Information:

Status: Empty

State of Last Session: Empty

Erasable: No

Free Sectors: 3,827,520

Free Space: 7,838,760,960 bytes

Free Time: 850:35:45 (MM:SS:FF)

Next Writable Address: 0

Supported Write Speeds: 2.4x, 4x, 6x, 8x

 

DVD±R DL Boundary Information:

L0 Data Zone Capacity: 1,913,760

Changeable: No

 

Physical Format Information (ADIP):

Disc ID: RITEK-S04-66

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Performance (Write Speed):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 3827519 (0x003A673F)

-> RS: 6,527 KB/s (4.8x) - WS: 3,324 KB/s (2.4x)

Descriptor 2...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 3827519 (0x003A673F)

-> RS: 6,527 KB/s (4.8x) - WS: 5,540 KB/s (4x)

Descriptor 3...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 3827519 (0x003A673F)

-> RS: 6,527 KB/s (4.8x) - WS: 8,310 KB/s (6x)

Descriptor 4...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 3827519 (0x003A673F)

-> RS: 6,527 KB/s (4.8x) - WS: 11,080 KB/s (8x)

 

 

 

 

I 12:32:38 ImgBurn Version 2.5.3.0 started!

I 12:32:38 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 12:32:38 Total Physical Memory: 3,144,940 KB - Available: 2,574,704 KB

I 12:32:38 Initialising SPTI...

I 12:32:38 Searching for SCSI / ATAPI devices...

I 12:32:38 -> Drive 1 - Info: BENQ DVD DD DW1650 BCIC (D:) (ATA)

I 12:32:38 -> Drive 2 - Info: LITE-ON COMBO SOHC-5236K RK07 (E:) (ATA)

I 12:32:38 Found 1 DVD-ROM/CD-RW and 1 DVD±RW!

I 12:51:35 Operation Started!

I 12:51:35 Source File: C:\Documents and Settings\Administrator\Desktop\Madden 12\xs_mn1m.dvd

I 12:51:35 Source File Sectors: 3,827,488 (MODE1/2048)

I 12:51:35 Source File Size: 7,838,695,424 bytes

I 12:51:35 Source File Volume Identifier: DVD_ROM

I 12:51:35 Source File Volume Set Identifier: d68a0000MS UDFBridge

I 12:51:35 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 12:51:35 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 12:51:35 Source File File System(s): ISO9660, UDF (1.50)

I 12:51:35 Destination Device: [3:0:0] BENQ DVD DD DW1650 BCIC (D:) (ATA)

I 12:51:35 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x, 8x)

 

 

Like I said, I'm stumped!!!