J-Jack

Huge Thanks ! (can't vote you positive -.- reached for this day ...) PS: Today & Yesterday you posted here at 04:58 PM ^^ Edit for Users which read this and have the same Questions: I read this: - the Sony Optiarc 7240 is a very good DVD+DL Burner, but sometimes he is loud (no Problem for me) Not Very Good for DL. LiteOn iHAS 624 can do both Burning and Scanning, but have Problems with original CDs. -> The Sony-drive can Scan the burned DvD Pie, Pif but no Jitter (not only verify for more Infos look here if you can read German ) - the LiteOn iHAS122 is a good Scan drive (to test quality)he can scan Pie, Pif and Jitter! If I have more Informations or tested one of them I will post it here! Greeting J-Jack

First thanks for the answer! Didn't see that this one was an used disc Oo (Have looked only on the back of disc) But testet it with 15+... The Laser I cleaned manually, I found it better than the cleaning disc... Have not heard good things about it. Both drives are very Cheap , have planned more money for a new drive but this is fine . Don't find this answer, can I scan the quality of burned data with it ? + can it read Jitter ? greeting J-Jack

Hi ImgBurn Community, first sry for my bad English I hope you can understand me! I have a problem with ImgBurn, I wanted to Burn Verbatim DVD+ DL but since one month it failed. Tested it with 4x 6x 8x (2,4x my drive doesn't support) As it failed I tested it first with no SPTD Driver , failed. I searched for a new Driver, have the newest. After that I reinstall Windows 7 and tested it, failed. At Next I opened the drive and clean it manuelly(But there was no dirt), test failed. Iam thinking that I need a new one ... but first I ask you if I need a new one ? Or is there some alternative? CD+ -> All fine, burns 20 in a row all perfekt! DVD+ -> All fine, burns many of it and they were all fine, too! DVD+DL -> Anytime I want to Burn Verbatim DVD+DL , the burntask closed with Error <5% (90% of it the rest it stops at 5%< <50%)(15 Times tested) Thanks for helping! So here is the Log: I 15:40:58 ImgBurn Version 2.5.5.0 started! I 15:40:58 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 15:40:58 Total Physical Memory: 4.126.660 KB - Available: 2.220.012 KB I 15:40:58 Initialising SPTI... I 15:40:58 Searching for SCSI / ATAPI devices... I 15:40:58 -> Drive 1 - Info: HL-DT-ST DVD+-RW GSA-H31N B110 (G:) (ATA) I 15:40:58 -> Drive 2 - Info: TSSTcorp DVD-ROM SH-D163B SB01 (H:) (ATA) I 15:40:58 Found 1 DVD-ROM and 1 DVD±RW! I 15:41:01 Operation Started! I 15:41:01 Source File: N:\... I 15:41:01 Source File Sectors: 3.827.488 (MODE1/2048) I 15:41:01 Source File Size: 7.838.695.424 bytes I 15:41:01 Source File Volume Identifier: DVD_ROM I 15:41:01 Source File Volume Set Identifier: d0a44000MS UDFBridge I 15:41:01 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 15:41:01 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 15:41:01 Source File File System(s): ISO9660; UDF (1.50) I 15:41:01 Destination Device: [0:1:0] HL-DT-ST DVD+-RW GSA-H31N B110 (G:) (ATA) I 15:41:01 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x) I 15:41:01 Destination Media Sectors: 3.827.520 I 15:41:01 Write Mode: DVD I 15:41:01 Write Type: DAO I 15:41:01 Write Speed: 6x I 15:41:01 Link Size: Auto I 15:41:01 Lock Volume: Yes I 15:41:01 Test Mode: No I 15:41:01 OPC: No I 15:41:01 BURN-Proof: Enabled I 15:41:01 Write Speed Successfully Set! - Effective: 8.310 KB/s (6x) I 15:41:01 Book Type Setting: N/A (Reason: Invalid Command Operation Code) I 15:41:01 Optimal L0 Data Zone Capacity: 1.913.760 I 15:41:01 Optimal L0 Data Zone Method: Copied From Original Disc I 15:41:01 Set L0 Data Zone Capacity Succeeded! I 15:41:02 Filling Buffer... (40 MB) I 15:41:03 Writing LeadIn... W 15:41:03 Failed to Write Sectors 0 - 31 - Reason: Invalid Address For Write W 15:41:03 Retrying (1 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (2 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (3 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (4 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (5 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (6 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (7 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (8 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (9 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (10 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (11 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (12 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (13 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (14 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (15 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (16 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (17 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (18 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (19 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (20 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write E 15:41:07 Failed to Write Sectors 0 - 31 - Reason: Invalid Address For Write E 15:41:07 Next Writable Address: 0 I 15:41:07 Synchronising Cache... W 15:41:09 User opted to skip the 'Close Track/Session/Disc' functions. E 15:41:09 Failed to Write Image! E 15:41:09 Operation Failed! - Duration: 00:00:08 I 15:41:09 Average Write Rate: N/A - Maximum Write Rate: N/A Edit: Yes I read the pinned topic and 2 topics with Spindle Servo failure (one of it -> Look pinned topic number 5) And do you know a good drive for Verbatim +DL ? It would be perfekt if I could scan with it too. Can I adjust the Laser or something like that?