Pirate Problem
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Pirate Problem
-
-
I bought new disks, Verbatims from singapore (they're supposed to be the best) and every disk I've tried burned to completion. But when I try to verify, about half disks failed verification. About 3/4 of the disks that failed failed at 50%, others failed at around the 90% mark. But they all still work when I put them into my Xbox (games play fine as far as I can tell). What should I do now? Get a new burner?
-
The old Memorex discs that could be written in the past, did they have the same media code? This media code is usually tricky for burners to deal with as it's rare to see it supported by the firmware/burner.
I 16:52:56 Destination Device: [0:0:0] TSSTcorp CDDVDW SE-S084D TS01 (F:) (USB)I 16:52:56 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 3x, 4x)
Insert an old disc and switch to read mode and look in text of the right side of the progrram under disc info.
Here is the info from an old disk that was burned successfully.
TSSTcorp CDDVDW SE-S084D TS01 (USB)Current Profile: DVD+R DL
Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 3,825,936
Size: 7,835,516,928 bytes
Time: 850:14:36 (MM:SS:FF)
File System Information:
Sectors: 2,724
Size: 5,578,752 bytes
Time: 00:38:24 (MM:SS:FF)
TOC Information:
Session 1... (LBA: 0)
-> Track 01 (Mode 1, LBA: 0 - 3825935)
-> LeadOut (LBA: 3825936)
Track Information:
Session 1...
-> Track 01 (LTSA: 0, LTS: 3825936, LRA: 0)
Disc Control Blocks Information:
TSSTcorp SE-S084D
Physical Format Information (ADIP - L0):
Disc ID: RITEK-S04-66
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Physical Format Information (ADIP - L1):
Disc ID: RITEK-S04-66
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Physical Format Information (Last Recorded - L0):
Disc ID: RITEK-S04-66
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,579,023
Last Physical Sector in Layer 0: 2,110,367
Physical Format Information (Last Recorded - L1):
Disc ID: RITEK-S04-66
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,579,023
Last Physical Sector in Layer 0: 2,110,367
Layer Information:
Layer 0 Sectors: 1,913,760 (50.02%)
Layer 1 Sectors: 1,912,176 (49.98%)
Are you looking for MBIPG101-R10-65 ? Then yes, it's different. I guess I got lucky the first time and got a good batch but this second batch is crap?
Something else I just noticed, the ones that failed to burn successfully come up as empty with 25.3 gb free space when put inside my computer.
I've been buying these off Amazon. Is there anyway I can tell if they will be RITEK or MBIPG101 before purchasing? I just realized the first batch was from an amazon seller and the second batch was from Amazon.
-
I already read that thread before posting, it didn't help.
-
I'm using Memorex DVD+r DL disks. I've done this dozens of times already using Memorex and this is the first time it has happened to me. After burning for a while I get this message.
I've wasted about 10 disks doing this and it seems to always happen at either 55% or 62% (not sure if this means anything).
I've tried burning at different speeds and turning off programs to save memory and it still doesn't work. Let me know what you think.
Once again, I've done this at least 40 times using Memorex disks without any problems over the past few months. I took a break for about a month and now I get this problem.
Logs
I 16:51:26 ImgBurn Version 2.5.5.0 started!I 16:51:26 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)
I 16:51:26 Total Physical Memory: 1,833,072 KB - Available: 983,064 KB
I 16:51:26 Initialising SPTI...
I 16:51:26 Searching for SCSI / ATAPI devices...
I 16:51:26 -> Drive 1 - Info: MagicISO Virtual DVD-ROM 1.0A (E:) (Unknown)
I 16:51:26 -> Drive 2 - Info: Optiarc DVD RW AD-7580S FX04 (D:) (RAID)
I 16:51:26 -> Drive 3 - Info: TSSTcorp CDDVDW SE-S084D TS01 (F:) (USB)
I 16:51:26 Found 1 DVD-ROM and 2 DVD±RW/RAMs!
I 16:51:58 Searching for SCSI / ATAPI devices...
I 16:51:58 -> Drive 1 - Info: MagicISO Virtual DVD-ROM 1.0A (E:) (Unknown)
I 16:51:58 -> Drive 2 - Info: Optiarc DVD RW AD-7580S FX04 (D:) (RAID)
I 16:51:58 -> Drive 3 - Info: TSSTcorp CDDVDW SE-S084D TS01 (F:) (USB)
I 16:51:58 Found 1 DVD-ROM and 2 DVD±RW/RAMs!
I 16:52:55 Operation Started!
I 16:52:55 Source File: C:\Users\Kenneth\Desktop\iso\B2TB-mortal kombat.dvd
I 16:52:56 Source File Sectors: 3,827,488 (MODE1/2048)
I 16:52:56 Source File Size: 7,838,695,424 bytes
I 16:52:56 Source File Volume Identifier: DVD_ROM
I 16:52:56 Source File Volume Set Identifier: d0a44000MS UDFBridge
I 16:52:56 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 16:52:56 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 16:52:56 Source File File System(s): ISO9660, UDF (1.50)
I 16:52:56 Destination Device: [0:0:0] TSSTcorp CDDVDW SE-S084D TS01 (F:) (USB)
I 16:52:56 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 3x, 4x)
I 16:52:56 Destination Media Sectors: 4,173,824
I 16:52:56 Write Mode: DVD
I 16:52:56 Write Type: DAO
I 16:52:56 Write Speed: 4x
I 16:52:56 Link Size: Auto
I 16:52:56 Lock Volume: Yes
I 16:52:56 Test Mode: No
I 16:52:56 OPC: No
I 16:52:56 BURN-Proof: Enabled
I 16:52:56 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 16:52:56 Book Type Setting: DVD-ROM
I 16:52:56 Optimal L0 Data Zone Capacity: 1,913,760
I 16:52:56 Optimal L0 Data Zone Method: Copied From Original Disc
I 16:54:27 Set L0 Data Zone Capacity Succeeded!
I 16:54:28 Filling Buffer... (40 MB)
I 16:54:30 Writing LeadIn...
I 16:54:58 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 16:54:58 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 16:54:58 Writing Layer 0... (LBA: 0 - 1913759)
I 17:07:01 Writing Layer 1... (LBA: 1913760 - 3827487)
W 17:09:34 Failed to Write Sectors 2124512 - 2124543 - Reason: Write Error
W 17:09:34 Retrying (1 of 20)...
W 17:10:00 Retry Failed - Reason: Invalid Address For Write
W 17:10:00 Retrying (2 of 20)...
W 17:10:00 Retry Failed - Reason: Invalid Address For Write
W 17:10:00 Retrying (3 of 20)...
W 17:10:00 Retry Failed - Reason: Invalid Address For Write
W 17:10:00 Retrying (4 of 20)...
W 17:10:00 Retry Failed - Reason: Invalid Address For Write
W 17:10:00 Retrying (5 of 20)...
W 17:10:00 Retry Failed - Reason: Invalid Address For Write
W 17:10:00 Retrying (6 of 20)...
W 17:10:00 Retry Failed - Reason: Invalid Address For Write
W 17:10:00 Retrying (7 of 20)...
W 17:10:00 Retry Failed - Reason: Invalid Address For Write
W 17:10:00 Retrying (8 of 20)...
W 17:10:00 Retry Failed - Reason: Invalid Address For Write
W 17:10:00 Retrying (9 of 20)...
W 17:10:00 Retry Failed - Reason: Invalid Address For Write
W 17:10:00 Retrying (10 of 20)...
W 17:10:00 Retry Failed - Reason: Invalid Address For Write
W 17:10:00 Retrying (11 of 20)...
W 17:10:00 Retry Failed - Reason: Invalid Address For Write
W 17:10:00 Retrying (12 of 20)...
W 17:10:00 Retry Failed - Reason: Invalid Address For Write
W 17:10:00 Retrying (13 of 20)...
W 17:10:00 Retry Failed - Reason: Invalid Address For Write
W 17:10:00 Retrying (14 of 20)...
W 17:10:00 Retry Failed - Reason: Invalid Address For Write
W 17:10:00 Retrying (15 of 20)...
W 17:10:01 Retry Failed - Reason: Invalid Address For Write
W 17:10:01 Retrying (16 of 20)...
W 17:10:01 Retry Failed - Reason: Invalid Address For Write
W 17:10:01 Retrying (17 of 20)...
W 17:10:01 Retry Failed - Reason: Invalid Address For Write
W 17:10:01 Retrying (18 of 20)...
W 17:10:01 Retry Failed - Reason: Invalid Address For Write
W 17:10:01 Retrying (19 of 20)...
W 17:10:01 Retry Failed - Reason: Invalid Address For Write
W 17:10:01 Retrying (20 of 20)...
W 17:10:01 Retry Failed - Reason: Invalid Address For Write
E 17:14:27 Failed to Write Sectors 2124512 - 2124543 - Reason: Write Error
E 17:14:27 Next Writable Address: 2124064
I 17:14:27 Synchronising Cache...
W 17:14:30 User opted to skip the 'Close Track/Session/Disc' functions.
E 17:14:30 Failed to Write Image!
I 17:14:31 Exporting Graph Data...
I 17:14:31 Graph Data File: C:\Users\Kenneth\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SE-S084D_TS01_FRIDAY-SEPTEMBER-23-2011_4-52_PM_MBIPG101-R10-65_4x.ibg
I 17:14:31 Export Successfully Completed!
E 17:14:31 Operation Failed! - Duration: 00:21:34
I 17:14:31 Average Write Rate: 3,634 KB/s (2.6x) - Maximum Write Rate: 5,695 KB/s (4.1x)
Problem burning game
in ImgBurn Support
Posted