gMan24
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by gMan24
-
-
As advised, update ImgBurn as we do not offer support for older versions. Check your firmware also.
I've updated ImgBurn, however I've been looking high and low for the FW of this drive and can't find it (not on the company page either), are you guys hinting that the FW is bad and needs to be updated or is it a general suggestion?
Thanks
-
Thanks mates, I'm reluctant to experiment so I'll try some other dvds first to see if it's the drive.
But isn't this supposed to be the best media? I've tried worse before and it all worked at 2.4x speed, so should I burn the media in another PC?
-
Hi folks! I'm a little mad, and a whole lot of sad because I wasted a DL DVD. It was bought because someone recommended it as the best type to me and it was very expensive so before I go waste another one I hope you fine people could help me out here. I've burned DL discs before at 2.4x, never had any trouble then, only now that I used Verbatim it's given me an error for the first time. I used Arita discs before that which always worked
I 20:21:25 ImgBurn Version 2.5.1.0 started!I 20:21:25 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
I 20:21:25 Total Physical Memory: 4.044.900 KB - Available: 2.137.120 KB
I 20:21:25 Initialising SPTI...
I 20:21:25 Searching for SCSI / ATAPI devices...
I 20:21:25 -> Drive 1 - Info: Optiarc DVD RW AD-7585H KS05 (F:) (ATAPI)
I 20:21:25 -> Drive 2 - Info: ELBY CLONEDRIVE 1.4 (H:) (SCSI)
I 20:21:25 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!
I 20:21:35 Operation Started!
I 20:21:35 Source File: 12345.dvd
I 20:21:35 Source File Sectors: 3.827.488 (MODE1/2048)
I 20:21:35 Source File Size: 7.838.695.424 bytes
I 20:21:35 Source File Volume Identifier: DVD_ROM
I 20:21:35 Source File Volume Set Identifier: ec67c000MS UDFBridge
I 20:21:35 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 20:21:35 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 20:21:35 Source File File System(s): ISO9660; UDF (1.50)
I 20:21:35 Destination Device: [0:1:0] Optiarc DVD RW AD-7585H KS05 (F:) (ATAPI)
I 20:21:35 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x)
I 20:21:35 Destination Media Sectors: 4.173.824
I 20:21:35 Write Mode: DVD
I 20:21:35 Write Type: DAO
I 20:21:35 Write Speed: 2,4x
I 20:21:35 Link Size: Auto
I 20:21:35 Lock Volume: Yes
I 20:21:35 Test Mode: No
I 20:21:36 OPC: No
I 20:21:36 BURN-Proof: Enabled
I 20:21:38 Write Speed Successfully Set! - Effective: 3.324 KB/s (2,4x)
I 20:21:38 Book Type Setting: N/A
I 20:21:38 Optimal L0 Data Zone Capacity: 1.913.760
I 20:21:38 Optimal L0 Data Zone Method: Copied From Original Disc
I 20:21:38 Set L0 Data Zone Capacity Succeeded!
I 20:21:40 Filling Buffer... (40 MB)
I 20:21:41 Writing LeadIn...
I 20:22:49 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 20:22:49 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 20:22:49 Writing Layer 0... (LBA: 0 - 1913759)
W 20:23:22 Failed to Write Sectors 26176 - 26207 - Reason: Write Error
W 20:23:22 Retrying (1 of 20)...
W 20:23:22 Retry Failed - Reason: Invalid Address For Write
W 20:23:22 Retrying (2 of 20)...
W 20:23:22 Retry Failed - Reason: Invalid Address For Write
W 20:23:22 Retrying (3 of 20)...
W 20:23:22 Retry Failed - Reason: Invalid Address For Write
W 20:23:22 Retrying (4 of 20)...
W 20:23:22 Retry Failed - Reason: Invalid Address For Write
W 20:23:22 Retrying (5 of 20)...
W 20:23:22 Retry Failed - Reason: Invalid Address For Write
W 20:23:22 Retrying (6 of 20)...
W 20:23:22 Retry Failed - Reason: Invalid Address For Write
W 20:23:22 Retrying (7 of 20)...
W 20:23:22 Retry Failed - Reason: Invalid Address For Write
W 20:23:22 Retrying (8 of 20)...
W 20:23:22 Retry Failed - Reason: Invalid Address For Write
W 20:23:22 Retrying (9 of 20)...
W 20:23:22 Retry Failed - Reason: Invalid Address For Write
W 20:23:22 Retrying (10 of 20)...
W 20:23:22 Retry Failed - Reason: Invalid Address For Write
W 20:23:22 Retrying (11 of 20)...
W 20:23:22 Retry Failed - Reason: Invalid Address For Write
W 20:23:22 Retrying (12 of 20)...
W 20:23:22 Retry Failed - Reason: Invalid Address For Write
W 20:23:22 Retrying (13 of 20)...
W 20:23:23 Retry Failed - Reason: Invalid Address For Write
W 20:23:23 Retrying (14 of 20)...
W 20:23:23 Retry Failed - Reason: Invalid Address For Write
W 20:23:23 Retrying (15 of 20)...
W 20:23:23 Retry Failed - Reason: Invalid Address For Write
W 20:23:23 Retrying (16 of 20)...
W 20:23:23 Retry Failed - Reason: Invalid Address For Write
W 20:23:23 Retrying (17 of 20)...
W 20:23:23 Retry Failed - Reason: Invalid Address For Write
W 20:23:23 Retrying (18 of 20)...
W 20:23:23 Retry Failed - Reason: Invalid Address For Write
W 20:23:23 Retrying (19 of 20)...
W 20:23:23 Retry Failed - Reason: Invalid Address For Write
W 20:23:23 Retrying (20 of 20)...
W 20:23:23 Retry Failed - Reason: Invalid Address For Write
W 20:23:56 Retrying (21)...
W 20:23:56 Retry Failed - Reason: Invalid Address For Write
W 20:23:57 Retrying (22)...
W 20:23:57 Retry Failed - Reason: Invalid Address For Write
W 20:23:58 Retrying (23)...
W 20:23:58 Retry Failed - Reason: Invalid Address For Write
E 20:25:08 Failed to Write Sectors 26176 - 26207 - Reason: Write Error
E 20:25:08 Next Writable Address: 25545
I 20:25:08 Synchronising Cache...
W 20:25:21 User opted to skip the 'Close Track/Session/Disc' functions.
E 20:25:21 Failed to Write Image!
I 20:25:21 Exporting Graph Data...
I 20:25:21 Graph Data File: Optiarc_DVD_RW_AD-7585H_KS05_MAANDAG-26-SEPTEMBER-2011_20-21_MKM-003-00_2,4x.ibg
I 20:25:21 Export Successfully Completed!
E 20:25:21 Operation Failed! - Duration: 00:03:45
I 20:25:21 Average Write Rate: 379 KB/s (0.3x) - Maximum Write Rate: 3.428 KB/s (2.5x)
Any ideas? Hope anyone can help here
Write error giving me a headache
in ImgBurn Support
Posted
I'll try searching for a new firmware one more time and otherwise I'll buy a USB external drive. Thanks for the help again everyone.