Arch Feline

I have gotten a bit better at using the IMGburn options. I read and reread all of your posts. You guys/gals really helped.

Any help which you give me is voluntary. It is yours to give. Or not. My question rephrased is other than Book type = DVD-ROM and Perform OPC before write what settings are there for a write that might make this burning of a Wii game on dual layer media successful? @LIGHTNING UK! regarding a post of yours below. What is the other command which ImgBurn does not send by default? "Try enabling the 'Perform OPC Before Write' option. I know exactly which commands CloneCD sends before a burn starts and that's one of 2 that ImgBurn doesn't also send (by default anyway)".

I am not blaming Imgburn. I am asking what settings I should use for burning a dual layer for Wii. I am asking here because I need the knowledge resource of at least one person who understands the various capabilities of ImgBurn. There are many permutations of the many settings of ImgBurn that will burn an iso on a dual layer so that the DVD device can read it back. Someone may know which settings on the most recent version of ImgBurn are best for a Wii Dual Layer. I am positive that there are members of this forum who know. Will someone with this knowledge bother to read my topic and answer? Dunno, but I hope. For instance I could burn dual layer without the DVD-rom book type and the dual layer disk would still burn/verify properly but we both know that DVD-rom is more successful. I am asking what other settings are like book type = DVD-rom. I found another for instance. I should (according to Cynthia) try with and without "Performing Optimum Power Calibration (OPC ) is a special technique used in newer CD/DVD recordable drives to perform a test write and read in an area inside of the lead-in, in order to determine the best laser power for recording and to adjust to each recordable disc, which may vary slightly from different manufacturers, or for other reasons." Could you guys link me to some more of your posts???

I am guessing that I insert the log as a code snippet. I 17:15:51 ImgBurn Version 2.5.6.0 started! I 17:15:51 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 17:15:51 Total Physical Memory: 1,038,316 KB - Available: 438,032 KB I 17:15:51 Initialising SPTI... I 17:15:51 Searching for SCSI / ATAPI devices... I 17:15:52 -> Drive 1 - Info: MATSHITA DVD-RAM UJ-850S 1.20 (D:) (ATA) I 17:15:52 -> Drive 2 - Info: ATAPI iHAS424 B GL1A (G:) (USB) I 17:15:52 Found 2 DVD±RW/RAMs! I 17:24:45 Operation Started! I 17:24:45 Source File: E:\...\Xenoblade Chronicles.iso I 17:24:45 Source File Sectors: 4,155,840 (MODE1/2048) I 17:24:45 Source File Size: 8,511,160,320 bytes I 17:24:45 Source File Volume Identifier: Xenoblade Chronicles I 17:24:45 Source File File System(s): Special I 17:24:45 Destination Device: [0:0:0] ATAPI iHAS424 B GL1A (G:) (USB) I 17:24:45 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) I 17:24:45 Destination Media Supported Write Speeds: 2.4x I 17:24:45 Destination Media Sectors: 4,173,824 I 17:24:45 Write Mode: DVD I 17:24:45 Write Type: DAO I 17:24:45 Write Speed: MAX I 17:24:45 Link Size: Auto I 17:24:45 Lock Volume: Yes I 17:24:45 Test Mode: No I 17:24:45 OPC: No I 17:24:45 BURN-Proof: Enabled I 17:24:45 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 17:24:45 Book Type Setting: DVD-ROM I 17:24:45 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 17:24:46 User Specified L0 Data Zone Capacity: 2,084,960 I 17:25:29 Set L0 Data Zone Capacity Succeeded! I 17:25:29 Filling Buffer... (40 MB) I 17:25:46 Writing LeadIn... I 17:25:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 4155839) I 17:25:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4155839) I 17:25:47 Writing Layer 0... (LBA: 0 - 2084959) I 17:47:13 Writing Layer 1... (LBA: 2084960 - 4155839) I 18:08:37 Synchronising Cache... I 18:08:42 Closing Track... I 18:08:43 Finalising Disc... I 18:09:46 Operation Successfully Completed! - Duration: 00:45:00 I 18:09:46 Average Write Rate: 3,235 KB/s (2.3x) - Maximum Write Rate: 3,413 KB/s (2.5x) I 18:09:46 Cycling Tray before Verify... W 18:09:54 Waiting for device to become ready... I 18:10:08 Device Ready! I 18:10:09 Operation Started! I 18:10:09 Source Device: [0:0:0] ATAPI iHAS424 B GL1A (G:) (USB) I 18:10:09 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) I 18:10:09 Source Media Supported Write Speeds: 2.4x I 18:10:09 Image File: E:\...\Xenoblade Chronicles.iso I 18:10:09 Image File Sectors: 4,155,840 (MODE1/2048) I 18:10:09 Image File Size: 8,511,160,320 bytes I 18:10:09 Image File Volume Identifier: Xenoblade Chronicles I 18:10:09 Image File File System(s): Special I 18:10:09 Read Speed (Data/Audio): MAX / MAX I 18:10:10 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4155839) I 18:10:10 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4155839) I 18:10:10 Verifying Layer 0... (LBA: 0 - 2084959) I 18:19:14 Verifying Layer 1... (LBA: 2084960 - 4155839) I 18:28:16 Operation Successfully Completed! - Duration: 00:18:00 I 18:28:16 Average Verify Rate: 7,703 KB/s (5.6x) - Maximum Verify Rate: 11,158 KB/s (8.1x)

Before I found this topic (link below) my new DVD burner could not even verify what it wrote. I changed the setting that it shows and now the verify works. My disk still does not work in the Wii. The disk is supposed to be Xenoblade Chronicles. The DVD channel in the upper left hand corner is not even recognizing it as Xenoblade Chronicles. I am thinking that there are other settings I need to change. http://www.modmasters.net/content/view/54/30/ I upgraded ImgBurn a few days ago. I have never burned a dual layer for the Wii. My burner is Liteon ihas 424 (and my modchip is Wasabi Zero).