[ASUS minimum write speed]

OK. Thank you for your reply, I don't know if any of my driver are good, or the computer itself (operative system) I just know that I always use a good media, but still I didn't make any readable navigator DVD.

 

Thaks again for your quick reply

[ASUS minimum write speed]

What makes you think you've got an Asus DRW-22B2L? The log certainly doesn't show it.

 

I 19:27:53 Searching for SCSI / ATAPI devices...

I 19:27:53 -> Drive 1 - Info: HL-DT-ST DVD-RAM GSA-H55L 1.06 (E:) (ATA)

I 19:27:53 -> Drive 2 - Info: LITE-ON DVDRW SOHW-832S VS0M (F:) (ATA)

I 19:27:53 -> Drive 3 - Info: PW2883Q SQD918A 2.0B (G:) (SCSI)

I 19:27:53 Found 1 DVD-ROM, 1 DVD±RW and 1 DVD±RW/RAM!

 

If that log isn't current (it does say November 2011), please post the correct one.

 

You should also read this - http://forum.imgburn.com/index.php?showtopic=8000

Sorry, the log file is the old one, the asus have replaced the lite-on, anyway the same problem I have with the LG, even that one can't write less than 4x, and yes I read already the suggestion for the DL, but nothing that I didn't know allready, cause I am using verbatim DVD+R DL(the "MKM-001-00" and the "MKM-003-00" and DVD-R dl I did even try with the TDK+R, but no way, following in other forum the discussions about how to make such a DVD, it seems that all the people who made it did it with very low speed such as 1x; 2x; 2,4x, maybe on old driver.

Sorry again for the wrong log file, but trust me now I have even asus above mentioned and I tried anyway on the old lite-on I have disassembled (maybe the lite-on didn't have the best firmware). PLEASE I NEED SUGGESTIONS.

[ASUS minimum write speed]

I would like to know how to write a media with speed 1x or 2x since i realized that the dvd dl I am trying to make Has been done with a very low speed on old drive.

I have an ASUS DRW-22B2L and when I use a verbatim +R 8x the minimum speed allowed is 4, in the end the dvd doesn't work on my navigator system.

 

I did install the last firmware 1.02? do I have to change again the DVD writer?

 

Thanks

log-for-nav.txt

[Write speed faster than set]

I 16:31:24 Destination Device: [3:0:0] TSSTcorp CDDVDW SH-S203N SB00 (K:) (ATA)

I 16:31:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x)

 

The bits in bold are the speeds your drive/firmware support the 'RICOHJPN-D01-67' dye at.

 

Supported write speeds are always shown in the disc info panel on the right when there's a disc in the drive.

 

2.4x is the lowest speed the DVD+ (plus) format ever supported so 1x wouldn't really be an option on *any* drive.

 

You should update the firmware on your drive to SB02.

 

http://www.firmwarehq.com/Samsung/SH-S203N/files.html

 

 

I am having the same trouble with ASUS DRW-22B2L and I wasted a lot od DVD+R DL cause I can't write them with speed less than 4 do you think it will be possible write slowly.

Here my log

 

Thank you in advance

log-for-nav.txt

[changing booktype on ASUS]

The DRW-22B2L is handled automatically by ImgBurn (2.5.6.0 anyway), you don't need to mess with any booktype stuff.

 

 

Thank for your reply and sorry to disturb you.

 

For lightning uk

 

I try to burn a navigation disk on verbatim 8xDVD+R DL that you have described as the best with imgburm with the lower speed 4x and

I wasted it cause the result is a DVD+R and not a DVD-rom so my navigator doesn't read it.

Maybe I didn't understand what you mean by saying the ASUS set the DVD+R automatically and no need to change the booktype.

Can you please help me.

[changing booktype on ASUS]

Only DVD+R media can have the booktype changed, while DVD-R media can't be changed.

 

As for the log you posted, it doesn't show you burning anything, so scroll further to find the part from when you burned a disc and paste that session.

 

Also you should update your ImgBurn.

 

 

 

this is the log for the last try with the navigation disk I did it with old LITE-ON that now I have disassembled

 

log-for-nav.txt

[changing booktype on ASUS]

The drive should automatically booktype DVD+R DL media to DVD-ROM by itself, you don't need to do anything.

 

If you're having a problem please explain it in details and also post the log of that burn.

 

 

Thanks But I have been told that only DVD-R are set as DVD-ROM ad the +R have to be set manually as I did on the LG anyway I am having problem to burn an ISO file the DVD is not functioning on my car navigator system even the computer read it normally.

Last year for the 2010 version I did it with the Verbatim 8xDVD-R DL now I can't find anymore this media support, only 4x and it doesn't work so I tried with +R TDK and Verbatim.

I have been told from the navigators forum that this Disk is hard to make it someone did it with TDK 8x DVD+R DL and someone did it with the verbatim 8x DVD-R DL I have found only the TDK +R or the Verbatim +R.

I think I have even problem from the beginning cause on the log file I have already a message with the start of the imgburm. See The file.

>ImgBurnGRU.log

 

Please I need suggestions

[changing booktype on ASUS]

I'm a new comer so hi everybody

 

I just know basic functions of the imgburn so please don't be surprise of my questions.

I changed one of the DVD reader on my computer before I had a LG and a LITE-ON so was very easy to find the OEM media to change the setting for the DVD+R DL into DVD-ROM, now with the ASUS I don't know what to do can someone hlp me please.

 

My media is ASUS DRW-22B2L