jimclark

OK - Verbatim dual layer (or double layer, as they call it) disc burned and verified! I do still have a menu issue, but can safely assume ImgBurn is doing exactly what it's supposed to do, and that the menu issue is occurring due to something earlier in the process. Thanks again for your help.

Thanks for your quick reply! Yes, I have done all suggestions in that thread but buy new media. I have used two burners, 1 dvd and 1 BR, both less than 1 month old. Firmware is most current. I tried all the speeds available - I have a coaster collection in my circular file...:-) So, now I'll go out and get some verbatim dual layer discs and see if that solves the problem.

Will do. Thank you for your reply. I appreciate it. I updated the app and after checking "verify", the disc failed to verify - see log and error mesage below. Is this bad media, or something else? Thanks for your help! I 08:44:30 Operation Started! I 08:44:30 Source File: F:\1631 Steve Moran Recital\Encore 3\Disc Image\Moran2011DualAutomaticMax.iso I 08:44:30 Source File Sectors: 4,072,352 (MODE1/2048) I 08:44:30 Source File Size: 8,340,176,896 bytes I 08:44:30 Source File Volume Identifier: Moran2011Dual2 I 08:44:30 Source File Volume Set Identifier: 3f6b9a6e Moran2011Dual2 I 08:44:30 Source File Application Identifier: SONIC SOLUTIONS IMAGESCRIPT I 08:44:30 Source File Implementation Identifier: Adobe Encore DVD I 08:44:30 Source File File System(s): ISO9660, UDF (1.02) I 08:44:30 Destination Device: [6:0:0] HP DVD Writer 1260t BH21 (D:) (ATA) I 08:44:30 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) I 08:44:30 Destination Media Supported Write Speeds: 4x, 6x, 8x I 08:44:30 Destination Media Sectors: 4,173,824 I 08:44:30 Write Mode: DVD I 08:44:30 Write Type: DAO I 08:44:30 Write Speed: MAX I 08:44:30 Link Size: Auto I 08:44:30 Lock Volume: Yes I 08:44:30 Test Mode: No I 08:44:30 OPC: No I 08:44:30 BURN-Proof: Enabled I 08:44:30 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 08:44:34 Optimal L1 Data Zone Start LBA: 2036416 (VTS_01, PGC: 1, Cell: 45, Vob/Cell ID: 1/45, Time: 01:08:41, SPLIP: No) I 08:44:34 Optimal L0 Data Zone Capacity: 2,036,416 I 08:44:34 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set I 08:45:54 Set L0 Data Zone Capacity Succeeded! I 08:45:54 Filling Buffer... (40 MB) I 08:45:55 Writing LeadIn... I 08:45:56 Writing Session 1 of 1... (1 Track, LBA: 0 - 4072351) I 08:45:56 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4072351) I 08:45:56 Writing Layer 0... (LBA: 0 - 2036415) W 08:57:02 Failed to Write Sectors 1741408 - 1741439 - Reason: Write Error W 08:57:02 Retrying (1 of 20)... W 08:57:06 Retry Failed - Reason: Invalid Address For Write

Will do. Thank you for your reply. I appreciate it.

I created an .iso image in Encore with three pages of menus/submenus. After burning with ImgBurn, I can access all the dvd content by using the number buttons on the remote ONLY – I can’t navigate with the “arrows”. There is no response when I try to navigate through the menu structure this way. I’ve tested this with both my PC and my Blu-Ray DVD player connected to the TV with the same results. However, using Virtual CloneDrive, I can successfully mount the image and navigate through the menu structure with the arrows and access content without a problem, which leads me to believe the .iso image is fine. Any clue to what is causing this menu problem? I’m using Ritek dual layer DVD+R DL media. After the first attempt at AWS I burned at 4x speed, with no change. Any help is appreciated. ImgBurn Log I 23:50:06 ImgBurn Version 2.5.4.0 started! I 23:50:06 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1) I 23:50:06 Total Physical Memory: 12,581,304 KB - Available: 8,323,492 KB I 23:50:06 Initialising SPTI... I 23:50:06 Searching for SCSI / ATAPI devices... I 23:50:06 -> Drive 1 - Info: HP DVD Writer 1260t BH21 (D:) (ATA) I 23:50:06 -> Drive 2 - Info: ELBY CLONEDRIVE 1.4 (I:) (SCSI) I 23:50:06 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 23:50:52 Operation Started! I 23:50:52 Source File: F:\1631 Steve Moran Recital\Encore 3\Disc Image\Moran2011DualAutomaticMax.iso I 23:50:52 Source File Sectors: 4,072,352 (MODE1/2048) I 23:50:52 Source File Size: 8,340,176,896 bytes I 23:50:52 Source File Volume Identifier: Moran2011Dual2 I 23:50:52 Source File Volume Set Identifier: 3f6b9a6e Moran2011Dual2 I 23:50:52 Source File Application Identifier: SONIC SOLUTIONS IMAGESCRIPT I 23:50:52 Source File Implementation Identifier: Adobe Encore DVD I 23:50:52 Source File File System(s): ISO9660, UDF (1.02) I 23:50:52 Destination Device: [6:0:0] HP DVD Writer 1260t BH21 (D:) (ATA) I 23:50:52 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x) I 23:50:52 Destination Media Sectors: 4,173,824 I 23:50:52 Write Mode: DVD I 23:50:52 Write Type: DAO I 23:50:52 Write Speed: 4x I 23:50:52 Link Size: Auto I 23:50:52 Lock Volume: Yes I 23:50:52 Test Mode: No I 23:50:52 OPC: No I 23:50:53 BURN-Proof: Enabled I 23:50:53 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 23:51:11 Optimal L1 Data Zone Start LBA: 2036416 (VTS_01, PGC: 1, Cell: 45, Vob/Cell ID: 1/45, Time: 01:08:41, SPLIP: No) I 23:51:11 Optimal L0 Data Zone Capacity: 2,036,416 I 23:51:11 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set I 23:52:39 Set L0 Data Zone Capacity Succeeded! I 23:52:39 Filling Buffer... (40 MB) I 23:52:40 Writing LeadIn... I 23:52:41 Writing Session 1 of 1... (1 Track, LBA: 0 - 4072351) I 23:52:41 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4072351) I 23:52:41 Writing Layer 0... (LBA: 0 - 2036415) I 00:05:35 Writing Layer 1... (LBA: 2036416 - 4072351) I 00:18:34 Synchronising Cache... I 00:18:40 Closing Track... I 00:18:41 Finalising Disc... I 00:19:32 Exporting Graph Data... I 00:19:32 Graph Data File: C:\Users\Jim Clark\AppData\Roaming\ImgBurn\Graph Data Files\HP_DVD_Writer_1260t_BH21_SUNDAY-NOVEMBER-13-2011_11-50_PM_RITEK-S04-66_4x.ibg I 00:19:32 Export Successfully Completed! I 00:19:32 Operation Successfully Completed! - Duration: 00:28:39 I 00:19:32 Average Write Rate: 5,247 KB/s (3.8x) - Maximum Write Rate: 5,633 KB/s (4.1x)