["Power Calibration Error" on DL]

The forums were down for awhile, but here's what happened:

 

I replaced my power supply (due to some posts on other forums), and indeed had an improvement. Unfortunately, only burning up to 50%

 

Suggestions are all greatly appreciated.

 

UDF file system

 

 

I 11:46:22 ImgBurn Version 2.1.0.0 started!

I 11:46:22 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

W 11:46:22 Drive X:\ (FAT) does not support single files > 4 GB

W 11:46:22 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 11:46:23 Initialising SPTI...

I 11:46:23 Searching for SCSI / ATAPI devices...

I 11:46:23 Found 1 DVD-ROM and 1 DVD?RW!

I 11:46:54 Operation Started!

I 11:46:54 Building Image Tree...

I 11:46:54 Calculating Totals...

I 11:46:54 Preparing Image...

I 11:46:54 Image Size: 7,689,764,864 bytes

I 11:46:54 Image Sectors: 3,754,768

I 11:46:54 Operation Successfully Completed! - Duration: 00:00:00

I 11:47:06 Operation Started!

I 11:47:06 Building Image Tree...

I 11:47:17 Calculating Totals...

I 11:47:17 Preparing Image...

I 11:47:17 Image Size: 7,689,764,864 bytes

I 11:47:17 Image Sectors: 3,754,768

I 11:47:19 Operation Successfully Completed! - Duration: 00:00:12

I 11:47:19 Operation Started!

I 11:47:19 Source File: -==/\/[bUILD IMAGE]\/\==-

I 11:47:19 Source File Sectors: 3,754,768 (MODE1/2048)

I 11:47:19 Source File Size: 7,689,764,864 bytes

I 11:47:19 Source File Volume Identifier: busido 4

I 11:47:19 Source File Application Identifier: ImgBurn v2.1.0.0

I 11:47:19 Source File Implementation Identifier: ImgBurn

I 11:47:19 Source File File System(s): UDF (1.02)

I 11:47:19 Destination Device: [1:0:0] Memorex 16X-DDL-IN 1.A4 (E:) (ATA)

I 11:47:19 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 11:47:19 Destination Media Sectors: 4,173,824

I 11:47:19 Write Mode: DVD

I 11:47:19 Write Type: DAO

I 11:47:19 Write Speed: 2.4x

I 11:47:19 Link Size: Auto

I 11:47:19 Test Mode: No

I 11:47:19 BURN-Proof: Enabled

I 11:47:19 Optimal L0 Data Zone Capacity: 1,877,392

I 11:47:19 Optimal L0 Data Zone Method: ECC Block Boundary

I 11:47:56 Filling Buffer...

I 11:47:57 Writing LeadIn...

I 11:47:59 Writing Image...

I 11:47:59 Writing Layer 0... (LBA: 0 - 1877391)

I 12:06:47 Writing Layer 1... (LBA: 1877392 - 3754767)

W 12:07:09 Failed to Write Sectors 1878224 - 1878255 - Power Calibration Area Is Full

W 12:07:09 Retrying (1 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (2 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (3 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (4 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (5 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (6 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (7 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (8 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (9 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (10 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (11 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (12 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (13 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (14 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (15 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (16 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (17 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (18 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (19 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:07:09 Retrying (20 of 20)...

W 12:07:09 Retry Failed - Write Error

W 12:09:30 Retrying (21)...

W 12:09:30 Retry Failed - Write Error

E 12:09:33 Failed to Write Sectors 1878224 - 1878255 - Power Calibration Area Is Full

I 12:09:33 Synchronising Cache...

I 12:09:34 Closing Track...

E 12:09:38 Close Track Failed! - Reason: Write Error

I 12:09:38 Finalising Disc...

E 12:09:39 Failed to Write Image!

E 12:09:39 Operation Failed! - Duration: 00:22:20

I 12:09:39 Average Write Rate: 2,902 KB/s (2.1x) - Maximum Write Rate: 3,621 KB/s (2.6x)

["Power Calibration Error" on DL]

One of the Afterdawn denizens suggested I make the trip over here.

 

Here's my original thread:

 

http://forums.afterdawn.com/thread_view.cfm/397172#2405750

 

Looks like I need to buy a new writer? My memorex :-( is only a few months old.

 

Could it be that my power supply is crashing?

 

I'm using verbatim +r DL

memorex writer (yeah, I know)

anydvd, then dvdclone2, then imgburn.

 

firmware is current for the writer (I think!!! [yes...it is current...I just reran the firmware again).

 

I have tested a SL disk (compressed via dvdclone2) in between failed DL burns. Worked perfectly.

 

I 18:01:04 ImgBurn Version 2.1.0.0 started!

I 18:01:04 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

W 18:01:04 Drive I:\ (FAT32) does not support single files > 4 GB

W 18:01:04 Drive X:\ (FAT) does not support single files > 4 GB

W 18:01:04 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 18:01:05 Initialising SPTI...

I 18:01:05 Searching for SCSI / ATAPI devices...

I 18:01:05 Found 1 DVD-ROM and 1 DVD?RW!

I 18:01:39 Operation Started!

I 18:01:39 Building Image Tree...

I 18:01:46 Checking Directory Depth...

I 18:01:46 Calculating Totals...

I 18:01:46 Preparing Image...

E 18:01:50 Operation Failed! - Duration: 00:00:11

I 18:02:01 Operation Started!

I 18:02:01 Building Image Tree...

I 18:02:03 Calculating Totals...

I 18:02:03 Preparing Image...

I 18:02:03 Image Size: 7,689,764,864 bytes

I 18:02:03 Image Sectors: 3,754,768

I 18:02:06 Operation Successfully Completed! - Duration: 00:00:05

I 18:02:06 Operation Started!

I 18:02:06 Source File: -==/\/[bUILD IMAGE]\/\==-

I 18:02:06 Source File Sectors: 3,754,768 (MODE1/2048)

I 18:02:06 Source File Size: 7,689,764,864 bytes

I 18:02:06 Source File Volume Identifier: CloneDVDTemp

I 18:02:06 Source File Application Identifier: ImgBurn v2.1.0.0

I 18:02:06 Source File Implementation Identifier: ImgBurn

I 18:02:06 Source File File System(s): UDF (1.02)

I 18:02:06 Destination Device: [1:0:0] Memorex 16X-DDL-IN 1.A4 (E:) (ATA)

I 18:02:06 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 18:02:06 Destination Media Sectors: 3,754,784

I 18:02:06 Write Mode: DVD

I 18:02:06 Write Type: DAO

I 18:02:06 Write Speed: 2.4x

I 18:02:06 Link Size: Auto

I 18:02:06 Test Mode: No

I 18:02:06 BURN-Proof: Enabled

I 18:02:06 Optimal L0 Data Zone Capacity: 1,877,392

I 18:02:06 Optimal L0 Data Zone Method: ECC Block Boundary

I 18:02:17 Filling Buffer...

I 18:02:18 Writing LeadIn...

W 18:02:32 Failed to Write Sectors 0 - 31 - Power Calibration Area Is Full

W 18:02:32 Retrying (1 of 20)...

W 18:02:48 Retry Failed - Power Calibration Area Is Full

W 18:02:48 Retrying (2 of 20)...

W 18:03:03 Retry Failed - Power Calibration Area Is Full

W 18:03:03 Retrying (3 of 20)...

W 18:03:19 Retry Failed - Power Calibration Area Is Full

W 18:03:19 Retrying (4 of 20)...

W 18:03:36 Retry Failed - Power Calibration Area Is Full

W 18:03:36 Retrying (5 of 20)...

W 18:03:52 Retry Failed - Power Calibration Area Is Full

W 18:03:52 Retrying (6 of 20)...

W 18:04:08 Retry Failed - Power Calibration Area Is Full

W 18:04:08 Retrying (7 of 20)...

W 18:04:24 Retry Failed - Power Calibration Area Is Full

W 18:04:24 Retrying (8 of 20)...

W 18:04:39 Retry Failed - Power Calibration Area Is Full

W 18:04:39 Retrying (9 of 20)...

W 18:04:55 Retry Failed - Power Calibration Area Is Full

W 18:04:55 Retrying (10 of 20)...

W 18:05:11 Retry Failed - Power Calibration Area Is Full

W 18:05:11 Retrying (11 of 20)...

W 18:05:26 Retry Failed - Power Calibration Area Is Full

W 18:05:26 Retrying (12 of 20)...

W 18:05:42 Retry Failed - Power Calibration Area Is Full

W 18:05:42 Retrying (13 of 20)...

W 18:05:58 Retry Failed - Power Calibration Area Is Full

W 18:05:58 Retrying (14 of 20)...

W 18:06:14 Retry Failed - Power Calibration Area Is Full

W 18:06:14 Retrying (15 of 20)...

W 18:06:29 Retry Failed - Power Calibration Area Is Full

W 18:06:29 Retrying (16 of 20)...

W 18:06:45 Retry Failed - Power Calibration Area Is Full

W 18:06:45 Retrying (17 of 20)...

W 18:07:01 Retry Failed - Power Calibration Area Is Full

W 18:07:01 Retrying (18 of 20)...

W 18:07:17 Retry Failed - Power Calibration Area Is Full

W 18:07:17 Retrying (19 of 20)...

W 18:07:33 Retry Failed - Power Calibration Area Is Full

W 18:07:33 Retrying (20 of 20)...

W 18:07:49 Retry Failed - Power Calibration Area Is Full

E 18:07:56 Failed to Write Sectors 0 - 31 - Power Calibration Area Is Full

I 18:07:56 Synchronising Cache...

I 18:07:57 Closing Track...

I 18:07:58 Finalising Disc...

E 18:07:59 Failed to Write Image!

E 18:07:59 Operation Failed! - Duration: 00:05:53

I 18:07:59 Average Write Rate: N/A - Maximum Write Rate: N/A

 

Thanks much, Imgburn!

 

crumbles