cliphairs

Swapped the sata cable from the 6gb sata port over to a 3gb port. This solved the problem. Thank you for your help.

Do you think its worth reflashing the liteon drive, or swap the sata and give it a go?

Would i be better swapping the sata to one of the 3gb ports? They are controlled by a NEC® USB 3.0 controller.

It is a Marvell® PCIe 9128 controller. Will check the family tree log.

Yes the drive is plugged into one of my sata ports on my motherboard. The cable is plugged into a 6Gb/s port as i had no spare 3Gb/s port. Would this cause a problem?? Do you think i should try reflashing my liteon iHAS124 again? Cheers

I HAVE RECENTLY INSTALLED THE NEW IMG VERSION. I HAVE TRIED VARIOUS DIFFERENT SETTINGS AS TO TRY TO PREVENT THE I/O ERROR OCCURING. I AM USING VERBATIM DVD+R DL DISCS TO TRY TO BACK UP MY XBOX DISCS. THE LOG COMES UP WITH:- I/O ERROR Device:[4:0:0] ATAPI ihas124 BALOS (J:) Sata CDB:2A 00 00 00 32 00 00 00 20 00 Interpretation :write (10)-sectors:12800-12831 Reason: The request could not be peformed because of an I/O device error I REALISE THAT THIS IS PROBABLY NOT DUE TO IMG BURNER SETTINGS, AS THEY DONT REALLY NEED TO BE ALTERED THAT MUCH NOW WITH THE NEW C4EVA 3.0 I HAVE LOOKED AT SEVERAL DIFFERENT EXPLANATIONS AS TO WHY THIS CAN OCCUR, BUT DONT WANT TO KEEP TRYING DIFFERENT THINGS AND WASTING MY DISCS IF SOMEONE CAN GIVE ME SOME ANSWER AS TO SOLVE THE PROBLEM IS IT A PROBLEM WITH MY LITEON BURNER PERHAPS? HOPE SOME ONE CAN GIVE ME THE HEADS UP ON THE ERROR MESSAGES