del72

ok thank i dont know what i done when i was messing around with the drive but think i messed up the firmware, the drive dosent even show it can burn 8.5g anymore do you know where i could get a copy of the orignal firmware,i can only find it for the stanard version not the 5280s+

hi. i have a sony optiarc 5280 the one that burns 8.5 gigs is it possible to change any settings in img that will let me change the burn speed of a disk that will only burn at 4x and above down to burn a 2.4 i know this was possible on my old ihas but im not sure if the same process would work on the sony thanks

thank you lightning looks like its the drive ,have tried a few more burns but got same results even opened the drive to give it a clean .oh well looks like im in the market for a new drive i dont soppose you could point me to a list of drives that works with payload tools

thanks lightning i let program do the adjustments, this is the 4th batch of verbs in 2 weeks so i think i can rule out the disks ,when you say turn opc off do you mean in settings untick perform opc before write,or would it make any difference if i flashed the burner back to stock firmware and tried using payload tools just trying to burn another with the changes you said and gettin this message in log set lo data zone capacity failed-reason invalid feild in parameters list

ok this is my last burn,i usally nero disk speed to check the disks,up untill 2 weeks ago i always got a score of around93/94 but now all my burns score 0 I 11:46:20 ImgBurn Version 2.5.8.0 started! I 11:46:20 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 11:46:20 Total Physical Memory: 1,047,536 KiB - Available: 696,728 KiB I 11:46:20 Initialising SPTI... I 11:46:20 Searching for SCSI / ATAPI devices... I 11:46:20 -> Drive 1 - Info: DTSOFT BDROM 1.05 (E:) (Virtual) I 11:46:20 -> Drive 2 - Info: ATAPI iHAS124 B AL0S (D:) (RAID) I 11:46:21 Found 1 DVD±RW/RAM and 1 BD-ROM! I 11:47:08 Operation Started! I 11:47:08 Source File: F:\xbox\imars-deadpool.dvd I 11:47:08 Source File Sectors: 4,267,015 (MODE1/2048) I 11:47:09 Source File Size: 8,738,846,720 bytes I 11:47:09 Source File Volume Identifier: DVD_ROM I 11:47:09 Source File Volume Set Identifier: a6cec000MS UDFBridge I 11:47:09 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 11:47:09 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 11:47:09 Source File File System(s): ISO9660, UDF (1.50) I 11:47:09 Destination Device: [1:0:0] ATAPI iHAS124 B AL0S (D:) (RAID) I 11:47:09 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 11:47:09 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 11:47:09 Destination Media Sectors: 4,267,040 I 11:47:09 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes) I 11:47:09 Write Mode: DVD I 11:47:09 Write Type: DAO I 11:47:09 Write Speed: 4x I 11:47:09 DVD+R DL Reserve Track: No I 11:47:09 Link Size: Auto I 11:47:09 Lock Volume: Yes I 11:47:09 Test Mode: No I 11:47:09 OPC: Yes I 11:47:09 BURN-Proof: Disabled I 11:47:09 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 11:47:09 Book Type Setting: DVD-ROM I 11:47:09 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes I 11:47:09 CD/DVD Life Record Count: 148 - CD/DVD Record Count: 9 I 11:47:37 User Specified L0 Data Zone Capacity: 2,133,520 I 11:47:38 Set L0 Data Zone Capacity Succeeded! I 11:47:38 L0 Data Zone Capacity - Effective: 2,133,520 I 11:47:39 Filling Buffer... (513 MiB) I 11:48:05 Writing LeadIn... I 11:48:07 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 11:48:07 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 11:48:07 Writing Layer 0... (LBA: 0 - 2133519) I 12:01:18 Writing Layer 1... (LBA: 2133520 - 4267014) I 12:14:31 Synchronising Cache... I 12:14:36 Closing Track... I 12:14:37 Finalising Disc... I 12:15:10 Exporting Graph Data... I 12:15:10 Graph Data File: C:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_17-JULY-2013_11-47_MKM-003-00_4x.ibg I 12:15:10 Export Successfully Completed! I 12:15:10 Operation Successfully Completed! - Duration: 00:28:01 I 12:15:10 Average Write Rate: 5,391 KiB/s (4.0x) - Maximum Write Rate: 5,512 KiB/s (4.1x) I 12:16:05 Close Request Acknowledged I 12:16:05 Closing Down... I 12:16:05 Shutting down SPTI... I 12:16:05 ImgBurn closed! I 11:46:20 ImgBurn Version 2.5.8.0 started! I 11:46:20 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 11:46:20 Total Physical Memory: 1,047,536 KiB - Available: 696,728 KiB I 11:46:20 Initialising SPTI... I 11:46:20 Searching for SCSI / ATAPI devices... I 11:46:20 -> Drive 1 - Info: DTSOFT BDROM 1.05 (E:) (Virtual) I 11:46:20 -> Drive 2 - Info: ATAPI iHAS124 B AL0S (D:) (RAID) I 11:46:21 Found 1 DVD±RW/RAM and 1 BD-ROM! I 11:47:08 Operation Started! I 11:47:08 Source File: F:\xbox\imars-deadpool.dvd I 11:47:08 Source File Sectors: 4,267,015 (MODE1/2048) I 11:47:09 Source File Size: 8,738,846,720 bytes I 11:47:09 Source File Volume Identifier: DVD_ROM I 11:47:09 Source File Volume Set Identifier: a6cec000MS UDFBridge I 11:47:09 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 11:47:09 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 11:47:09 Source File File System(s): ISO9660, UDF (1.50) I 11:47:09 Destination Device: [1:0:0] ATAPI iHAS124 B AL0S (D:) (RAID) I 11:47:09 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 11:47:09 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 11:47:09 Destination Media Sectors: 4,267,040 I 11:47:09 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes) I 11:47:09 Write Mode: DVD I 11:47:09 Write Type: DAO I 11:47:09 Write Speed: 4x I 11:47:09 DVD+R DL Reserve Track: No I 11:47:09 Link Size: Auto I 11:47:09 Lock Volume: Yes I 11:47:09 Test Mode: No I 11:47:09 OPC: Yes I 11:47:09 BURN-Proof: Disabled I 11:47:09 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 11:47:09 Book Type Setting: DVD-ROM I 11:47:09 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes I 11:47:09 CD/DVD Life Record Count: 148 - CD/DVD Record Count: 9 I 11:47:37 User Specified L0 Data Zone Capacity: 2,133,520 I 11:47:38 Set L0 Data Zone Capacity Succeeded! I 11:47:38 L0 Data Zone Capacity - Effective: 2,133,520 I 11:47:39 Filling Buffer... (513 MiB) I 11:48:05 Writing LeadIn... I 11:48:07 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 11:48:07 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 11:48:07 Writing Layer 0... (LBA: 0 - 2133519) I 12:01:18 Writing Layer 1... (LBA: 2133520 - 4267014) I 12:14:31 Synchronising Cache... I 12:14:36 Closing Track... I 12:14:37 Finalising Disc... I 12:15:10 Exporting Graph Data... I 12:15:10 Graph Data File: C:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_17-JULY-2013_11-47_MKM-003-00_4x.ibg I 12:15:10 Export Successfully Completed! I 12:15:10 Operation Successfully Completed! - Duration: 00:28:01 I 12:15:10 Average Write Rate: 5,391 KiB/s (4.0x) - Maximum Write Rate: 5,512 KiB/s (4.1x http://imageshack.us/photo/my-images/713/1t0r.png/ this is the link for kprobe sorry i didnt know how to add it

ok thanks i run a burn now and post the log thanks

the message says experience tell me that your drive isnt currently configured for optimal overburning performance online hyper tunning should be disabled overspeed should be disabled would you like me to make the nessary changes i dont know what ive done to start gettin this message but my burns have gone to shite, if anybody could offer help or advice plase thanks should have said im using ihas and verbatim disks and have tried 4 different spindles with same results

no im using a 250gig ext hard drive il try the changes you mention thanks

hi ive been backing up my game collection and everytime a burn get to 99% i get a error message about wrong parameters but when i click retry my disk will finish burning im using a ihas burner and verbatim dvd+r dl am i doing something wrong