cowboys6190

Thanks for the reply!!! I have downloaded the .exe file but am not having any luck in flashing it. The program opened but none of my disk drives show up as being available for update. I tried to manually link the .exe to the device driver update screen but that did not work. Any ideas on how I can flash this.... Thanks!

I am trying to back-up a couple of my 3D blu-rays. I just bought a pack of Digistor 50GB discs (not cheap)... I am trying to burn the ISO copy of the movie and am immediately getting the power calibration area error. This is right at the write leadin phase. I have cleaned the burner out. I have tried a couple different BD-DL from the spindle I just bought. I am only trying to burn at 2X, which is the only supported speed. I have the most current firmware for my drive, at lease that I could find. I have also tried burning a couple other BD 3D ISO's and get the same error. I have been able to burn a non-3D backup to a BD-25 during this time with no problems. I am getting frustrated as this spindle of BD-DL were not cheap. I have tried the last couple in "test mode" so that I would not keep creating expensive coasters. Are my BD drive and BD-DL's not compatible??? If so, what BD drive would be recommended as I do not want these discs to go to waste. Below is one of the logs from my attempts to burn the 3D ISO. I 14:41:04 ImgBurn Version 2.5.6.0 started! I 14:41:04 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 14:41:04 Total Physical Memory: 3,667,528 KB - Available: 2,378,000 KB I 14:41:04 Initialising SPTI... I 14:41:04 Searching for SCSI / ATAPI devices... I 14:41:04 -> Drive 1 - Info: HL-DT-ST BD-RE WH08LS20 2.00-01 (E:) (Fibre) I 14:41:04 -> Drive 2 - Info: SAMSUNG UMS 0001 (G:) (USB) I 14:41:04 Found 1 BD-RE and 1 Unknown! I 14:41:52 Operation Started! I 14:41:52 Source File: F:\Original Movie Sources\Bolt - 3D\BOLT.iso I 14:41:52 Source File Sectors: 16,590,208 (MODE1/2048) I 14:41:52 Source File Size: 33,976,745,984 bytes I 14:41:52 Source File Volume Identifier: BOLT I 14:41:52 Source File Volume Set Identifier: 8CCF6FEC07E934B4_VOLUME_SET_ID I 14:41:52 Source File Application Identifier: APPLICATION_ID I 14:41:52 Source File Implementation Identifier: IMPLEMENTATION_ID I 14:41:52 Source File File System(s): UDF (2.50) I 14:41:52 Destination Device: [2:1:0] HL-DT-ST BD-RE WH08LS20 2.00 (E:) (Fibre) I 14:41:52 Destination Media Type: BD-R (Disc ID: CMCMAG-DI6-000) I 14:41:52 Destination Media Supported Write Speeds: 2x I 14:41:52 Destination Media Sectors: 24,438,784 I 14:41:52 Write Mode: BD I 14:41:52 Write Type: DAO I 14:41:52 Write Speed: 2x I 14:41:52 BD-R Verify Not Required: Yes I 14:41:52 Link Size: Auto I 14:41:52 Lock Volume: Yes I 14:41:52 Test Mode: Yes I 14:41:52 OPC: No I 14:41:52 BURN-Proof: Enabled I 14:41:52 Write Speed Successfully Set! - Effective: 8,991 KB/s (2x) I 14:41:52 Filling Buffer... (40 MB) I 14:41:55 Writing LeadIn... W 14:41:55 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error W 14:41:55 Retrying (1 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (2 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (3 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (4 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (5 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (6 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (7 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (8 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (9 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (10 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (11 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (12 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (13 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (14 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (15 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (16 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (17 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (18 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (19 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error W 14:41:55 Retrying (20 of 20)... W 14:41:55 Retry Failed - Reason: Power Calibration Area Error E 14:41:58 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error I 14:41:58 Synchronising Cache... W 14:42:01 User opted to skip the 'Close Track/Session/Disc' functions. I 14:42:01 Cycling Tray after Test Write... E 14:42:06 Failed to Write Image! E 14:42:08 Operation Failed! - Duration: 00:00:14 I 14:42:08 Average Write Rate: N/A - Maximum Write Rate: N/A