CariMDP

When I wanted to change's settings this error was --------------------------- ImgBurn --------------------------- Failed to Set Write Parameters! Reason: Invalid Field in Parameter List --------------------------- accept --------------------------- Anyway, after many tests, I resolved the problem by changing sata cable from the recorder to the board Thank you very much for your answers, they can close the topic ... I hope that this experience helps someone

yes i tried I 01:53:18 ImgBurn Version 2.5.6.0 started! I 01:53:18 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1) I 01:53:18 Total Physical Memory: 3.397.816 KB - Available: 1.669.220 KB I 01:53:19 Initialising SPTI... I 01:53:19 Searching for SCSI / ATAPI devices... I 01:53:19 -> Drive 1 - Info: ATAPI iHAS122 ZL0F (K:) (ATA) I 01:53:19 -> Drive 2 - Info: ATAPI iHAS122 ZL0F (J:) (ATA) I 01:53:19 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (L:) (SCSI) I 01:53:19 Found 2 DVD±RW/RAMs and 1 BD-ROM/HD DVD-ROM! I 01:56:46 Operation Started! I 01:56:46 Source File: P:\Toy3.iso I 01:56:46 Source File Sectors: 2.282.368 (MODE1/2048) I 01:56:46 Source File Size: 4.674.289.664 bytes I 01:56:46 Source File Volume Identifier: TOY3 I 01:56:46 Source File Volume Set Identifier: 3D65AEA70022D36F I 01:56:46 Source File Application Identifier: IMGBURN V2.5.2.0 - THE ULTIMATE IMAGE BURNER! I 01:56:46 Source File Implementation Identifier: ImgBurn I 01:56:46 Source File File System(s): ISO9660; UDF (1.02) I 01:56:46 Destination Device: [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 01:56:46 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) I 01:56:46 Destination Media Supported Write Speeds: 4x; 6x; 8x; 12x; 16x; 18x; 20x I 01:56:46 Destination Media Sectors: 2.298.496 I 01:56:46 Write Mode: DVD I 01:56:46 Write Type: DAO I 01:56:46 Write Speed: 8x I 01:56:46 Link Size: Auto I 01:56:46 Lock Volume: Yes I 01:56:46 Test Mode: No I 01:56:46 OPC: No I 01:56:46 BURN-Proof: Enabled I 01:56:46 Write Speed Successfully Set! - Effective: 11.080 KB/s (8x) I 01:56:46 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: Yes, SmartBurn: Yes E 01:56:46 Failed to set Write Parameters! E 01:56:46 Reason: Invalid Field in Parameter List I can not change this from of the setting

I tried at 4x, 6x and 8x and the same error

another thing I can not do is change the advanced setting of the drive and enable or disable this... Smart Burn Force Hyper Tunning Over Speed Writing Online Hyper Tuning

Good Afternoon I have 2 recorders from the same brand, with new firmware ... one of them started to fail with the IMGBURN withing recording to the other I leave the log, family tree and debug with F8 Registro I 19:24:55 ImgBurn Version 2.5.7.0 started! I 19:24:55 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1) I 19:24:55 Total Physical Memory: 3.397.816 KB - Available: 2.099.192 KB I 19:24:55 Initialising SPTI... I 19:24:55 Searching for SCSI / ATAPI devices... I 19:24:56 -> Drive 1 - Info: ATAPI iHAS122 ZL0F (K:) (ATA) I 19:24:57 -> Drive 2 - Info: ATAPI iHAS122 ZL0F (J:) (ATA) I 19:24:57 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (L:) (SCSI) I 19:24:57 Found 2 DVD±RW/RAMs and 1 BD-ROM/HD DVD-ROM! I 19:25:41 Operation Started! I 19:25:41 Source File: P:\Cumple.iso I 19:25:41 Source File Sectors: 2.285.862 (MODE1/2048) I 19:25:41 Source File Size: 4.681.445.376 bytes I 19:25:42 Source File Volume Identifier: CUMPLE I 19:25:42 Source File Volume Set Identifier: AE2D068ADVDSHRNK I 19:25:42 Source File Implementation Identifier: DVD Shrink I 19:25:42 Source File File System(s): ISO9660; UDF (1.02) I 19:25:42 Destination Device: [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:25:42 Destination Media Type: DVD-R (Disc ID: RITEKG05) I 19:25:42 Destination Media Supported Write Speeds: 4x; 6x; 8x; 12x; 16x I 19:25:42 Destination Media Sectors: 2.298.496 I 19:25:42 Write Mode: DVD I 19:25:42 Write Type: DAO I 19:25:42 Write Speed: 4x I 19:25:42 Link Size: Auto I 19:25:42 Lock Volume: Yes I 19:25:42 Test Mode: No I 19:25:42 OPC: Yes I 19:25:42 BURN-Proof: Disabled I 19:25:42 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x) I 19:25:42 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: Yes, SmartBurn: Yes E 19:25:42 Failed to set Write Parameters! E 19:25:42 Reason: Invalid Field in Parameter List E 19:25:44 Operation Failed! - Duration: 00:00:02 I 19:25:44 Average Write Rate: N/A - Maximum Write Rate: N/A I 19:27:27 Device: [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:27:27 Family Tree: I 19:27:27 -> Equipo basado en ACPI x86 I 19:27:27 -> Sistema Microsoft compatible con ACPI I 19:27:27 -> Bus PCI I 19:27:27 -> Controladora de almacenamiento ATA serie Intel® 82801GB/GR/GH (familia ICH7) - 27C0 (VEN_8086&DEV_27C0 - Intel - intelide - v6.1.7601.17514) I 19:27:27 -> Canal IDE (ATA Channel 1) I 19:27:27 -> Unidad de CD-ROM (ATAPI iHAS122 ATA Device) (Channel 1, Target 1, Lun 0) Pressing F8 I 19:28:26 Operation Started! I 19:28:26 Source File: P:\Cumple.iso I 19:28:26 Source File Sectors: 2.285.862 (MODE1/2048) I 19:28:26 Source File Size: 4.681.445.376 bytes I 19:28:26 Source File Volume Identifier: CUMPLE I 19:28:26 Source File Volume Set Identifier: AE2D068ADVDSHRNK I 19:28:26 Source File Implementation Identifier: DVD Shrink I 19:28:26 Source File File System(s): ISO9660; UDF (1.02) I 19:28:26 Destination Device: [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 Destination Media Type: DVD-R (Disc ID: RITEKG05) I 19:28:26 Destination Media Supported Write Speeds: 4x; 6x; 8x; 12x; 16x I 19:28:26 Destination Media Sectors: 2.298.496 I 19:28:26 Write Mode: DVD I 19:28:26 Write Type: DAO I 19:28:26 Write Speed: 4x I 19:28:26 Link Size: Auto I 19:28:26 Lock Volume: Yes I 19:28:26 Test Mode: No I 19:28:26 OPC: Yes I 19:28:26 BURN-Proof: Disabled W 19:28:26 I/O Interface 'Debug Mode' has been Enabled! I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: 1E 00 00 00 01 00 I 19:28:26 CDB Interpretation: Prevent/Allow Medium Removal I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: 35 00 00 00 00 00 00 00 00 00 I 19:28:26 CDB Interpretation: Synchronise Cache I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: B6 00 00 00 00 00 00 00 00 00 1C 00 I 19:28:26 CDB Interpretation: Set Streaming I 19:28:26 BUFFER: 00 00 00 00 00 00 00 00 00 23 10 1F 00 00 56 90 00 00 03 E8 00 00 15 A4 00 00 03 E8 I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: 5A 00 2A 00 00 00 00 00 FC 00 I 19:28:26 CDB Interpretation: Mode Sense (10) - Page Code (0x2A) - CD/DVD Capabilities and Mechanical Status I 19:28:26 BUFFER: 00 4E 41 00 00 00 00 00 2A 46 3F 37 F1 77 2B 23 56 90 01 00 06 00 56 90 00 10 56 90 15 A4 00 01 00 00 00 00 15 A4 00 05 00 01 56 90 00 00 40 EC 00 00 2B 48 00 00 20 76 00 00 15 A4 00 00 00 00 I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: AC 14 00 00 00 00 00 00 00 01 00 00 I 19:28:26 CDB Interpretation: Get Performance I 19:28:26 BUFFER: 00 00 00 14 02 00 00 00 00 00 00 00 00 00 15 A4 00 23 12 7F 00 00 15 A4 I 19:28:26 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x) I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: 5A 00 30 00 00 00 00 00 18 00 I 19:28:26 CDB Interpretation: Mode Sense (10) - Page Code (0x30) - Vendor Specific (LITE-ON) I 19:28:26 BUFFER: 00 16 41 00 00 00 00 00 30 0E 2E 04 00 00 00 00 00 00 00 00 00 00 00 00 I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: 5A 00 30 00 00 00 00 00 18 00 I 19:28:26 CDB Interpretation: Mode Sense (10) - Page Code (0x30) - Vendor Specific (LITE-ON) I 19:28:26 BUFFER: 00 16 41 00 00 00 00 00 30 0E 2E 04 00 00 00 00 00 00 00 00 00 00 00 00 I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: 5A 00 30 00 00 00 00 00 18 00 I 19:28:26 CDB Interpretation: Mode Sense (10) - Page Code (0x30) - Vendor Specific (LITE-ON) I 19:28:26 BUFFER: 00 16 41 00 00 00 00 00 30 0E 2E 04 00 00 00 00 00 00 00 00 00 00 00 00 I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: 5A 00 30 00 00 00 00 00 18 00 I 19:28:26 CDB Interpretation: Mode Sense (10) - Page Code (0x30) - Vendor Specific (LITE-ON) I 19:28:26 BUFFER: 00 16 41 00 00 00 00 00 30 0E 2E 04 00 00 00 00 00 00 00 00 00 00 00 00 I 19:28:26 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: Yes, SmartBurn: Yes I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: 46 02 00 00 00 00 00 00 0C 00 I 19:28:26 CDB Interpretation: Get Configuration - Profile List I 19:28:26 BUFFER: 00 00 00 40 00 00 00 11 00 00 03 38 I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: 5A 00 05 00 00 00 00 00 FC 00 I 19:28:26 CDB Interpretation: Mode Sense (10) - Page Code (0x05) - Write Parameters I 19:28:26 BUFFER: 00 3A 41 00 00 00 00 00 05 32 42 05 08 10 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: 5A 00 85 00 00 00 00 00 FC 00 I 19:28:26 CDB Interpretation: Mode Sense (10) - Page Code (0x05) - Write Parameters I 19:28:26 BUFFER: 00 3A 41 00 00 00 00 00 05 32 40 05 08 00 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: 55 10 00 00 00 00 00 00 3C 00 I 19:28:26 CDB Interpretation: Mode Select (10) I 19:28:26 BUFFER: 00 00 00 00 00 00 00 00 05 32 40 05 08 00 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 E 19:28:26 SENSE: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 00 00 E 19:28:26 SENSE SK Interpretation: Illegal Request E 19:28:26 SENSE ASC/ASCQ Interpretation: Invalid Field in Parameter List I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: 46 02 00 21 00 00 00 00 FC 00 I 19:28:26 CDB Interpretation: Get Configuration - Incremental Streaming Writable I 19:28:26 BUFFER: 00 00 00 10 00 00 00 11 00 21 0D 08 01 00 01 02 01 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: 55 10 00 00 00 00 00 00 3C 00 I 19:28:26 CDB Interpretation: Mode Select (10) I 19:28:26 BUFFER: 00 00 00 00 00 00 00 00 05 32 22 25 08 10 00 00 00 00 00 00 00 10 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 E 19:28:26 SENSE: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 00 00 E 19:28:26 SENSE SK Interpretation: Illegal Request E 19:28:26 SENSE ASC/ASCQ Interpretation: Invalid Field in Parameter List I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: 55 10 00 00 00 00 00 00 3C 00 I 19:28:26 CDB Interpretation: Mode Select (10) I 19:28:26 BUFFER: 00 00 00 00 00 00 00 00 05 32 02 25 08 00 00 00 00 00 00 00 00 10 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 E 19:28:26 SENSE: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 00 00 E 19:28:26 SENSE SK Interpretation: Illegal Request E 19:28:26 SENSE ASC/ASCQ Interpretation: Invalid Field in Parameter List I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: 55 10 00 00 00 00 00 00 3C 00 I 19:28:26 CDB Interpretation: Mode Select (10) I 19:28:26 BUFFER: 00 00 00 00 00 00 00 00 05 32 22 05 08 10 00 00 00 00 00 00 00 10 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 E 19:28:26 SENSE: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 00 00 E 19:28:26 SENSE SK Interpretation: Illegal Request E 19:28:26 SENSE ASC/ASCQ Interpretation: Invalid Field in Parameter List I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:26 CDB: 55 10 00 00 00 00 00 00 3C 00 I 19:28:26 CDB Interpretation: Mode Select (10) I 19:28:26 BUFFER: 00 00 00 00 00 00 00 00 05 32 02 05 08 00 00 00 00 00 00 00 00 10 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 E 19:28:27 SENSE: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 00 00 E 19:28:27 SENSE SK Interpretation: Illegal Request E 19:28:27 SENSE ASC/ASCQ Interpretation: Invalid Field in Parameter List I 19:28:27 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:27 CDB: 55 10 00 00 00 00 00 00 3C 00 I 19:28:27 CDB Interpretation: Mode Select (10) I 19:28:27 BUFFER: 00 00 00 00 00 00 00 00 05 32 22 25 08 10 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 E 19:28:27 SENSE: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 00 00 E 19:28:27 SENSE SK Interpretation: Illegal Request E 19:28:27 SENSE ASC/ASCQ Interpretation: Invalid Field in Parameter List I 19:28:27 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA) I 19:28:27 CDB: 55 10 00 00 00 00 00 00 3C 00 I 19:28:27 CDB Interpretation: Mode Select (10) I 19:28:27 BUFFER: 00 00 00 00 00 00 00 00 05 32 02 25 08 00 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 E 19:28:27 SENSE: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 00 00 E 19:28:27 SENSE SK Interpretation: Illegal Request E 19:28:27 SENSE ASC/ASCQ Interpretation: Invalid Field in Parameter List E 19:28:27 Failed to set Write Parameters! E 19:28:27 Reason: Invalid Field in Parameter List I hope can help and I apologize for my English Thanks Carina