suofoglu

thank you for your time, support and help!!!!

ok, thanks i change the options in the eeprom utility, but what explains that the 1st burning do this errors in the area oh the layerbreak ( to install in xbox's hdd) and the 2nd burning with the same options no has errors and install 100%???

; I 11:03:35 ImgBurn Version 2.5.7.0 started! I 11:03:35 Microsoft Windows Vista Home Premium x64 Edition (6.0, Build 6002 : Service Pack 2) I 11:03:35 Total Physical Memory: 4.192.656 KB - Available: 2.981.016 KB I 11:03:35 Initialising SPTI... I 11:03:35 Searching for SCSI / ATAPI devices... I 11:03:35 -> Drive 1 - Info: DTSOFT BDROM 1.05 (E:) (Virtual) I 11:03:36 -> Drive 2 - Info: ATAPI iHAS224 B GL0A (D:) (ATAPI) I 11:03:36 Found 1 DVD±RW/RAM and 1 BD-ROM! I 11:04:16 Operation Started! I 11:04:16 Source File: C:\Users\kike\Desktop\descargas\fifa2013.espa_ol100%.pollo_0123\fifa2013.español100%.pollo_0123\fifa2013.español100%.pollo_0123.dvd I 11:04:16 Source File Sectors: 4.267.015 (MODE1/2048) I 11:04:16 Source File Size: 8.738.846.720 bytes I 11:04:16 Source File Volume Identifier: DVD_ROM I 11:04:16 Source File Volume Set Identifier: 3a03c000MS UDFBridge I 11:04:16 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 11:04:16 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 11:04:16 Source File File System(s): ISO9660; UDF (1.50) I 11:04:16 Destination Device: [0:1:0] ATAPI iHAS224 B GL0A (D:) (ATAPI) I 11:04:16 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 11:04:16 Destination Media Supported Write Speeds: 2,4x; 4x; 6x; 8x I 11:04:16 Destination Media Sectors: 4.267.040 I 11:04:16 Write Mode: DVD I 11:04:16 Write Type: DAO I 11:04:16 Write Speed: 2,4x I 11:04:16 DVD+R DL Reserve Track: No I 11:04:16 Link Size: Auto I 11:04:16 Lock Volume: Yes I 11:04:16 Test Mode: No I 11:04:16 OPC: No I 11:04:16 BURN-Proof: Enabled I 11:04:16 Write Speed Successfully Set! - Effective: 3.324 KB/s (2,4x) I 11:04:16 Book Type Setting: DVD-ROM I 11:04:16 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 11:04:16 Optimal L0 Data Zone Capacity: 2.133.520 I 11:04:16 Optimal L0 Data Zone Method: Copied From Original Disc I 11:04:16 Set L0 Data Zone Capacity Succeeded! I 11:04:16 Filling Buffer... (80 MB) I 11:04:18 Writing LeadIn... I 11:04:53 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 11:04:53 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 11:04:53 Writing Layer 0... (LBA: 0 - 2133519) I 11:26:49 Writing Layer 1... (LBA: 2133520 - 4267014) I 11:48:54 Synchronising Cache... I 11:49:22 Closing Track... I 11:49:23 Finalising Disc... I 11:50:15 Exporting Graph Data... I 11:50:15 Graph Data File: C:\Users\kike\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS224_B_GL0A_SÁBADO-29-DE-SEPTIEMBRE-DE-2012_11-04_MKM-003-00_2,4x.ibg I 11:50:15 Export Successfully Completed! I 11:50:15 Operation Successfully Completed! - Duration: 00:45:59 I 11:50:15 Average Write Rate: 3.232 KB/s (2.3x) - Maximum Write Rate: 3.396 KB/s (2.5x) I 11:50:25 Close Request Acknowledged I 11:50:25 Closing Down... I 11:50:25 Shutting down SPTI... I 11:50:25 ImgBurn closed!

i dont have more dvd's dl, but i can tell you that the imgburn burning log is ok, likes ever

yes i verify all the iso's, but i confused because with the same options and iso the second burning is good,without problems. the imgburn, in both cases, burning without problems, i think that i only use the ihas for burning xgd3 and the drive can be one month or more without works

the imgburn says that the operation was successfully complet, the problem appears at the moment to install on xbox360's hdd with the first burning, but if i burned inmediatly the second burning is ok, install all the disc, for this i'm confused!!

I have two xbox 360 consecutive games (fifa13 and sleeping dogs) that the 1st recording gives me 52-54% error when installing on hdd (in layerbreak) immediately do the 2nd recording, without changing anything in imgburn and ihas 224b, and 100% well installed. just use the XGD3 IHAS to record, you might spend a month without using the drive and that makes the first record not good? what can I do to record either the 1st?

I don't know what you ask me. tell me the step by step to do this. what are the drivers that I need? I 11:54:55 ImgBurn Version 2.5.7.0 started! I 11:54:55 Microsoft Windows Vista Home Premium x64 Edition (6.0, Build 6001 : Service Pack 1) I 11:54:55 Total Physical Memory: 4.192.656 KB - Available: 3.019.044 KB I 11:54:55 Initialising SPTI... I 11:54:55 Searching for SCSI / ATAPI devices... I 11:54:55 -> Drive 1 - Info: ATAPI iHAS224 B GL0A (D:) (ATAPI) I 11:54:55 Found 1 DVD±RW/RAM! I 11:56:18 Device: [0:1:0] ATAPI iHAS224 B GL0A (D:) (ATAPI) I 11:56:18 Family Tree: I 11:56:18 -> ACPI x64-based PC I 11:56:18 -> Sistema Microsoft compatible con ACPI I 11:56:18 -> Bus PCI I 11:56:18 -> Intel® ICH8R/ICH9R SATA RAID Controller (VEN_8086&DEV_2822 - Intel - iaStor) I 11:56:18 -> Unidad de CD-ROM (ATAPI iHAS224 (1) ok. the problem has dissapear because I've installed the service pack 1 of the O.S. thank you for your support lightning UK!

I don't know what you ask me. tell me the step by step to do this. what are the drivers that I need? I 11:54:55 ImgBurn Version 2.5.7.0 started! I 11:54:55 Microsoft Windows Vista Home Premium x64 Edition (6.0, Build 6001 : Service Pack 1) I 11:54:55 Total Physical Memory: 4.192.656 KB - Available: 3.019.044 KB I 11:54:55 Initialising SPTI... I 11:54:55 Searching for SCSI / ATAPI devices... I 11:54:55 -> Drive 1 - Info: ATAPI iHAS224 B GL0A (D:) (ATAPI) I 11:54:55 Found 1 DVD±RW/RAM! I 11:56:18 Device: [0:1:0] ATAPI iHAS224 B GL0A (D:) (ATAPI) I 11:56:18 Family Tree: I 11:56:18 -> ACPI x64-based PC I 11:56:18 -> Sistema Microsoft compatible con ACPI I 11:56:18 -> Bus PCI I 11:56:18 -> Intel® ICH8R/ICH9R SATA RAID Controller (VEN_8086&DEV_2822 - Intel - iaStor) I 11:56:18 -> Unidad de CD-ROM (ATAPI iHAS224 (1)

I don't know what you ask me. tell me the step by step to do this. what are the driversthat I need?

the same day I flashed ihas 224b, I reinstalled windows vista 64 bits and I've not install any service pack, the driver of drive is GL0A (c4eva's burner max); you think that the problem of the synchronization may be that??

How long time in minutes did you wait? once I waited more than 30 mins

my liteon ihas 224b flashing with c4eva's ixtreme burner max blocks after write 100% sectors, but when it has to finalising disc, the imgburn starts to synchronising cache and never stops, only if I shutdown my computer. I need help please ImgBurn.log