Garth02

Sorry its just that I find it weird you see. The ISO file I'm burning was from a custom DVD video I was making however the DVD burning software I was using could not make a layer break for the DL. So I saved the file as a ISO then use ImgBurn's build mode to find where I should put the layer break then use VobBlanker to create a layer break point then went back to ImgBurn to build the new ISO with the layer break. When I did it with the first disc of my set it worked fine, The second one I did not have the instructions up so I might have messed up when creating the layer break in VobBlanker (As it always messes up for me when its about to burn the next layer) I re-burn the first disc and there was no problems, I even created the third disc and there were no problems, its just that second ISO file I created that seems to always mess up(I've done the second one 7 times and it always stops at 50% just when its about to do the second layer).

I think it might be the iso itself cause it cant seem to break the 2nd layer on this specific file

I tried burning a diffrent file at 4x and it worked currently trying the previoues file if it gets past 50% then hopefully everything will be fine

Hi I'm still pretty new to all this but recently all of my DVDs have been failing to burn. The first time I did it, it worked just fine but now it always fails. Here is my ImgBurn Log. Just so you know I am using Verbatim DVD+R DL 2.4x discs. I 12:47:10 ImgBurn Version 2.5.7.0 started! I 12:47:10 Microsoft Windows Vista Home Premium x64 Edition (6.0, Build 6002 : Service Pack 2) I 12:47:10 Total Physical Memory: 4,191,740 KB - Available: 1,900,640 KB I 12:47:10 Initialising SPTI... I 12:47:10 Searching for SCSI / ATAPI devices... I 12:47:10 -> Drive 1 - Info: Optiarc BD ROM BC-5500A 1.B4 (F:) (ATA) I 12:47:10 Found 1 BD-ROM/DVD±RW! I 12:47:42 Operation Started! I 12:47:42 Source File: C:\Users\Eric\Documents\Aimersoft DVD Creator\MLPSE1DISC2.MDS I 12:47:42 Source File Sectors: 4,142,560 (MODE1/2048) I 12:47:42 Source File Size: 8,483,962,880 bytes I 12:47:42 Source File Volume Identifier: MLPSE1DISC2 I 12:47:42 Source File Volume Set Identifier: 40DE5D03003F35D4 I 12:47:42 Source File Application Identifier: IMGBURN V2.5.7.0 - THE ULTIMATE IMAGE BURNER! I 12:47:42 Source File Implementation Identifier: ImgBurn I 12:47:42 Source File File System(s): ISO9660, UDF (1.02) I 12:47:42 Destination Device: [1:0:0] Optiarc BD ROM BC-5500A 1.B4 (F:) (ATA) I 12:47:42 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) I 12:47:42 Destination Media Supported Write Speeds: 2.4x, 4x I 12:47:42 Destination Media Sectors: 4,173,824 I 12:47:42 Write Mode: DVD I 12:47:42 Write Type: DAO I 12:47:42 Write Speed: 2.4x I 12:47:42 DVD+R DL Reserve Track: No I 12:47:42 Link Size: Auto I 12:47:42 Lock Volume: Yes I 12:47:42 Test Mode: No I 12:47:42 OPC: No I 12:47:42 BURN-Proof: Enabled I 12:47:42 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 12:47:42 Book Type Setting: DVD-ROM I 12:47:42 Optimal L0 Data Zone Capacity: 2,071,280 I 12:47:42 Optimal L0 Data Zone Method: Copied From Original Disc I 12:48:08 Set L0 Data Zone Capacity Succeeded! I 12:48:08 Filling Buffer... (80 MB) I 12:48:10 Writing LeadIn... I 12:48:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 4142559) I 12:48:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4142559) I 12:48:11 Writing Layer 0... (LBA: 0 - 2071279) I 13:09:03 Writing Layer 1... (LBA: 2071280 - 4142559) W 13:10:06 Failed to Write Sectors 2073520 - 2073551 - Reason: No Seek Complete W 13:10:06 Retrying (1 of 20)... W 13:10:06 Retry Failed - Reason: Write Error W 13:10:06 Retrying (2 of 20)... W 13:10:06 Retry Failed - Reason: Write Error W 13:10:06 Retrying (3 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (4 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (5 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (6 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (7 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (8 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (9 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (10 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (11 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (12 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (13 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (14 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (15 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (16 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (17 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (18 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (19 of 20)... W 13:10:07 Retry Failed - Reason: Write Error W 13:10:07 Retrying (20 of 20)... W 13:10:07 Retry Failed - Reason: Write Error E 13:10:41 Failed to Write Sectors 2073520 - 2073551 - Reason: No Seek Complete I 13:10:42 Synchronising Cache... W 13:10:46 User opted to skip the 'Close Track/Session/Disc' functions. E 13:10:46 Failed to Write Image! I 13:10:46 Exporting Graph Data... I 13:10:46 Graph Data File: C:\Users\Eric\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_BD_ROM_BC-5500A_1.B4_JUNE-30-12_12-47_PM_MKM-001-00_2.4x.ibg I 13:10:46 Export Successfully Completed! E 13:10:46 Operation Failed! - Duration: 00:23:03 I 13:10:46 Average Write Rate: 3,071 KB/s (2.2x) - Maximum Write Rate: 5,372 KB/s (3.9x)